ZD25WQ16CTIGT
Serial Multi I/O NOR FlashThe ZD25WQ16CTIGT is a serial multi i/o nor flash from Zetta. View the full ZD25WQ16CTIGT datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
ZD25WQ16CTIGT shares its datasheet with ZD25WQ16C, whose page lists every part number it covers.
Official ZD25WQ16CTIGT datasheet (PDF) — the source this page was extracted from.
Manufacturer
ZettaCategory
Memory ICsZD25WQ16CTIGT Key Specifications
| Parameter | Value |
|---|---|
| Interfaces | SPI, QPI |
| Memory Size | 16M-bit |
| Data Retention | 20 years |
| Cycling Endurance | 100K cycles |
| Supply Voltage Range | 1.65V to 3.6V |
ZD25WQ16CTIGT Overview
Part: ZD25WQ16C — Zetta
Type: Serial NOR Flash Memory
Description: 1.65–3.6 V, 16 Mbit ultra-low power serial Flash supporting Standard, Dual, Quad SPI, and QPI up to 104 MHz.
Operating Conditions:
- Supply voltage: 1.65–3.6 V
- Operating temperature: -40 to 85 °C
- Maximum clock frequency: 104 MHz (for fast read)
Absolute Maximum Ratings:
- Max supply voltage: 4.2 V (-0.6 to 4.2 V)
- Applied Input / Output Voltage: -0.6 to VCC+0.4 V
- Transient Input / Output Voltage: -2.0 to VCC+2.0 V (overshoot)
- Max junction/storage temperature: 150 °C (-65 to 150 °C)
Key Specs:
- Density: 16 Mbit (2 MB)
- Maximum clock frequency: 104 MHz
- Standby current: 12 μA
- Deep power-down current: 0.2 μA
- Active read current: 3 mA (at 33 MHz)
- Active program/erase current: 3.5 mA
- Page program time: 2 ms
- Sector erase time (4 KB): 12 ms
- Block erase time (32 KB / 64 KB): 12 ms
- Cycling endurance: 100,000 program/erase cycles
- Data retention: 20 years
Features:
- Single, Dual, Quad SPI and QPI modes
- Fast Chip Erase time of 12 ms
- Uniform 256-byte page erase, 4 KB sector erase, and 32/64 KB block erase
- 128-bit Unique ID for each device
- 3 × 1024-byte security registers with OTP locks
- Serial Flash Discoverable Parameter (SFDP) support
Applications:
- Ultra-low power embedded systems
- Code and data storage
- Consumer and industrial IoT devices
Package:
- SOP8 150MIL
- TSSOP-8
- USON-8 (3x2x0.55 mm, 3x2x0.50 mm)
- WSON-8
ZD25WQ16CTIGT Features
-
128-Bit Unique ID for each device
-
-Discoverable (SFDP) register
-
3*1024-Byte Security Registers with OTP Locks
-
Package Information
-
SOP8 150MIL
-
-TSSOP-8
-
USON-8
-
-WSON-8
-
Contact ZETTA for KGD and other options
ZD25WQ16CTIGT Electrical Characteristics
Table-17. DC Parameters (Ta=-40 ° C to +85 ° C )
| Symbol | Parameter | Conditions | 1.65V to 3.6V | 1.65V to 3.6V | 1.65V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | |
|---|---|---|---|---|---|---|---|---|---|
| Symbol | Parameter | Conditions | Min. | Typ. | Max. | Min. | Typ. | Max. | Units |
| IDPD | Deep power down current | CS#=Vcc, all other inputs at 0V or Vcc | 0.2 | 3.0 | 0.3 | 3.0 | μA | ||
| ISB | Standby current | CS#, HOLD#, WP#=Vcc all inputs at CMOS levels | 8 | 15 | 12 | 15 | μA | ||
| ICC1 | Low power read current (03h) | f=1MHz; IOUT=0mA | 1.0 | 1.5 | 1.0 | 1.5 | mA | ||
| ICC1 | Low power read current (03h) | f=33MHz; IOUT=0mA | 2.0 | 3.0 | 2.0 | 3.0 | mA | ||
| ICC2 | Read current (0Bh) | f=50MHz; IOUT=0mA | 2.8 | 6.0 | 3.0 | 6.0 | mA | ||
| ICC2 | Read current (0Bh) | f=86MHz; IOUT=0mA | 3.2 | 7.0 | 4.5 | 8.0 | mA | ||
| ICC3 | Program current | CS#=Vcc | 3.0 | 5.0 | 4.0 | 6.0 | mA | ||
| ICC4 | Erase current | CS#=Vcc | 3.0 | 4.0 | 3.5 | 4.0 | mA | ||
| ICC5 | Write current | CS#=Vcc | 3.0 | 4.0 | 3.5 | 4.0 | mA | ||
| ILI | Input load current | All inputs at CMOS level | 1.0 | 1.0 | μA | ||||
| ILO | Output leakage | All inputs at CMOS level | 1.0 | 1.0 | μA | ||||
| VIL | Input low voltage | 0.2Vcc | 0.2Vcc | V | |||||
| VIH | Input high voltage | 0.8Vcc | 0.8Vcc | V | |||||
| VOL | Output low voltage | IOL=100μA | 0.2 | 0.2 | V | ||||
| VOH | Output high voltage | IOH=-100μA | Vcc-0.2 | Vcc-0.2 | V |
ZD25WQ16CTIGT Absolute Maximum Ratings
Table-15 Absolute Maximum Ratings
| Parameter | Value | Unit |
|---|---|---|
| Ambient Operating Temperature | -40 to 85 | °C |
| Storage Temperature | -65 to 150 | °C |
| Applied Input / Output Voltage | -0.6 to VCC+0.4 | V |
| Transient Input / Output Voltage(note: overshoot) | -2.0 to VCC+2.0 | V |
| VCC | -0.6 to 4.2 | V |
Figure-83. Maximum Negative/positive Overshoot Diagram
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| ZD25WQ16C | Zetta | SOP8 150MIL |
Other Memory ICs
- CH347T – WCH, Serial SLC NAND Flash Memory
- M24512-DFMC6TG – STMicroelectronics, EEPROM
- ST25DV04KC-JF6L3 – STMicroelectronics, Dynamic NFC/RFID Tag IC
- AT25SL128A-MHE-T – Renesas Electronics, 128-Mbit SPI Serial NOR Flash
- 23A1024 – Microchip Technology, Serial SRAM
- 23LC1024 – Microchip Technology, Serial SRAM
- 23LC1024-I/P – Microchip Technology, Serial SRAM
- 23LC1024-I/SN – Microchip Technology, Serial SRAM
Ask your AI agent about the ZD25WQ16CTIGT
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the ZD25WQ16CTIGT run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.