ZD25WQ16C
Serial Multi I/O Flash MemoryThe ZD25WQ16C is a serial multi i/o flash memory from Zetta. View the full ZD25WQ16C datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
Official ZD25WQ16C datasheet (PDF) — the source this page was extracted from.
ZD25WQ16C Key Specifications
| Parameter | Value |
|---|---|
| Endurance | 100,000 cycles |
| Memory Size | 16M-bit |
| Data Retention | 20 years |
| Active Read Current | 3mA (at 33MHz) |
| Supply Voltage Range | 1.65V to 3.6V |
| Deep Power Down Current | 0.2µA |
| Maximum Clock Frequency | 104MHz |
| Communication Interfaces | SPI, Dual SPI, Quad SPI, QPI |
| Active Program Erase Current | 3.5mA |
ZD25WQ16C Overview
Part: ZD25WQ16C — Zetta
Type: Serial NOR Flash Memory
Description: 1.65–3.6 V, 16 Mbit ultra-low power serial Flash supporting Standard, Dual, Quad SPI, and QPI up to 104 MHz.
Operating Conditions:
- Supply voltage: 1.65–3.6 V
- Operating temperature: -40 to 85 °C
- Maximum clock frequency: 104 MHz (for fast read)
Absolute Maximum Ratings:
- Max supply voltage: 4.2 V (-0.6 to 4.2 V)
- Applied Input / Output Voltage: -0.6 to VCC+0.4 V
- Transient Input / Output Voltage: -2.0 to VCC+2.0 V (overshoot)
- Max junction/storage temperature: 150 °C (-65 to 150 °C)
Key Specs:
- Density: 16 Mbit (2 MB)
- Maximum clock frequency: 104 MHz
- Standby current: 12 μA
- Deep power-down current: 0.2 μA
- Active read current: 3 mA (at 33 MHz)
- Active program/erase current: 3.5 mA
- Page program time: 2 ms
- Sector erase time (4 KB): 12 ms
- Block erase time (32 KB / 64 KB): 12 ms
- Cycling endurance: 100,000 program/erase cycles
- Data retention: 20 years
Features:
- Single, Dual, Quad SPI and QPI modes
- Fast Chip Erase time of 12 ms
- Uniform 256-byte page erase, 4 KB sector erase, and 32/64 KB block erase
- 128-bit Unique ID for each device
- 3 × 1024-byte security registers with OTP locks
- Serial Flash Discoverable Parameter (SFDP) support
Applications:
- Ultra-low power embedded systems
- Code and data storage
- Consumer and industrial IoT devices
Package:
- SOP8 150MIL
- TSSOP-8
- USON-8 (3x2x0.55 mm, 3x2x0.50 mm)
- WSON-8
ZD25WQ16C Features
-
128-Bit Unique ID for each device
-
-Discoverable (SFDP) register
-
3*1024-Byte Security Registers with OTP Locks
-
Package Information
-
SOP8 150MIL
-
-TSSOP-8
-
USON-8
-
-WSON-8
-
Contact ZETTA for KGD and other options
ZD25WQ16C Electrical Characteristics
Table-17. DC Parameters (Ta=-40 ° C to +85 ° C )
| Symbol | Parameter | Conditions | 1.65V to 3.6V | 1.65V to 3.6V | 1.65V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | 2.3V to 3.6V | |
|---|---|---|---|---|---|---|---|---|---|
| Symbol | Parameter | Conditions | Min. | Typ. | Max. | Min. | Typ. | Max. | Units |
| IDPD | Deep power down current | CS#=Vcc, all other inputs at 0V or Vcc | 0.2 | 3.0 | 0.3 | 3.0 | μA | ||
| ISB | Standby current | CS#, HOLD#, WP#=Vcc all inputs at CMOS levels | 8 | 15 | 12 | 15 | μA | ||
| ICC1 | Low power read current (03h) | f=1MHz; IOUT=0mA | 1.0 | 1.5 | 1.0 | 1.5 | mA | ||
| ICC1 | Low power read current (03h) | f=33MHz; IOUT=0mA | 2.0 | 3.0 | 2.0 | 3.0 | mA | ||
| ICC2 | Read current (0Bh) | f=50MHz; IOUT=0mA | 2.8 | 6.0 | 3.0 | 6.0 | mA | ||
| ICC2 | Read current (0Bh) | f=86MHz; IOUT=0mA | 3.2 | 7.0 | 4.5 | 8.0 | mA | ||
| ICC3 | Program current | CS#=Vcc | 3.0 | 5.0 | 4.0 | 6.0 | mA | ||
| ICC4 | Erase current | CS#=Vcc | 3.0 | 4.0 | 3.5 | 4.0 | mA | ||
| ICC5 | Write current | CS#=Vcc | 3.0 | 4.0 | 3.5 | 4.0 | mA | ||
| ILI | Input load current | All inputs at CMOS level | 1.0 | 1.0 | μA | ||||
| ILO | Output leakage | All inputs at CMOS level | 1.0 | 1.0 | μA | ||||
| VIL | Input low voltage | 0.2Vcc | 0.2Vcc | V | |||||
| VIH | Input high voltage | 0.8Vcc | 0.8Vcc | V | |||||
| VOL | Output low voltage | IOL=100μA | 0.2 | 0.2 | V | ||||
| VOH | Output high voltage | IOH=-100μA | Vcc-0.2 | Vcc-0.2 | V |
ZD25WQ16C Absolute Maximum Ratings
Table-15 Absolute Maximum Ratings
| Parameter | Value | Unit |
|---|---|---|
| Ambient Operating Temperature | -40 to 85 | °C |
| Storage Temperature | -65 to 150 | °C |
| Applied Input / Output Voltage | -0.6 to VCC+0.4 | V |
| Transient Input / Output Voltage(note: overshoot) | -2.0 to VCC+2.0 | V |
| VCC | -0.6 to 4.2 | V |
Figure-83. Maximum Negative/positive Overshoot Diagram
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| ZD25WQ16CTIGT | Zetta | — |
Other Memory ICs
- CH347T – WCH, Serial SLC NAND Flash Memory
- M24512-DFMC6TG – STMicroelectronics, EEPROM
- ST25DV04KC-JF6L3 – STMicroelectronics, Dynamic NFC/RFID Tag IC
- ZD25WQ16CTIGT – Zetta, Serial Multi I/O NOR Flash
- AT25SL128A-MHE-T – Renesas Electronics, 128-Mbit SPI Serial NOR Flash
- W25Q32JVSSIQ – Winbond
- 23A1024 – Microchip Technology, Serial SRAM
- 23LC1024 – Microchip Technology, Serial SRAM
Ask your AI agent about the ZD25WQ16C
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the ZD25WQ16C run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.