BQ24072
Synchronous Buck ConverterThe BQ24072 is a synchronous buck converter from Texas Instruments. View the full BQ24072 datasheet below including specifications and datasheet sections.
Manufacturer
Texas Instruments
Category
Synchronous Buck Converter
Overview
Part: bq24072/3/4/5/9(T) and bq24230/2 — Texas Instruments
Type: Li-Ion and Li-Polymer Charge Management IC
Description: 1.5-A single-chip Li-Ion and Li-Polymer charge management IC designed to power the system while independently charging the battery, supporting adapter or USB power sources.
Operating Conditions:
- Input dc Voltage: 4.75–6.5 V
- Operating temperature: -40 to +125 °C (junction temperature, thermal regulation)
Absolute Maximum Ratings:
- Max supply voltage: 28 V
- Max continuous current: 1.5 A (Battery Charge Current, I O(CHG))
- Max junction/storage temperature: 155 °C (thermal cutoff)
Key Specs:
- Battery Charge Current (I O(CHG)): 1 A (Typ), 1.5 A (Max)
- Input dc Voltage (V I(AC)): 4.75 V (Min), 5 V (Typ), 6.5 V (Max)
- Battery Regulation Voltage (V BAT): 4.2 V (bq24072/3/4/5), 4.1 V (bq24079(T))
- Output Overvoltage Protection (V OVP): 6.6 V (bq24072/3/5/9(T)), 10.5 V (bq24074)
- Output Regulation Voltage (V OUT(REG)): V BAT + 200 mV (bq24072), 4.4 V (bq24073/4), 5.5 V (bq24075/9(T))
- Dynamic Power-Path Management (V DPM): V O(REG) - 100 mV (bq24072/3/4), 4.3 V (bq24075/9(T))
- USB Input Current Limits: 100 mA, 500 mA
Features:
- Powers system independently while charging battery
- Reduces charge/discharge cycles on battery
- Allows system to run with absent or defective battery pack
- Instantaneous turn-on from external power source with deeply discharged battery
- Programmable input current limits for adapter or USB (100 mA, 500 mA)
- Dynamic adjustment of charge rate based on system load
- Three-phase charging: conditioning, constant current, constant voltage
- Minimum current-based charge termination
- Resistor-programmable charge timer for backup safety
- Automatic charge re-start if battery voltage falls below internal threshold
- Sleep mode when supply is removed
- Thermal regulation and thermal cutoff protection
Applications:
- Portable applications (Li-ion/Li-polymer)
- Headset designs (bq24230/2 family)
Package:
- SOT-23
Applications
| Amplifiers | amplifier.ti.com | Audio | www.ti.com/audio |
|---|---|---|---|
| Data Converters | dataconverter.ti.com | Automotive | www.ti.com/automotive |
| DLP® Products | www.dlp.com | Communications and Telecom | www.ti.com/communications |
| DSP | dsp.ti.com | Computers and Peripherals | www.ti.com/computers |
| Clocks and Timers | www.ti.com/clocks | Consumer Electronics | www.ti.com/consumer-apps |
| Interface | interface.ti.com | Energy | www.ti.com/energy |
| Logic | logic.ti.com | Industrial | www.ti.com/industrial |
| Power Mgmt | power.ti.com | Medical | www.ti.com/medical |
| Microcontrollers | microcontroller.ti.com | Security | www.ti.com/security |
| RFID | www.ti-rfid.com | Space, Avionics & Defense | www.ti.com/space-avionics-defense |
| RF/IF and ZigBee® Solutions | www.ti.com/lprf | Video and Imaging | www.ti.com/video |
| Wireless | www.ti.com/wireless-apps |
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| BQ24073 | Texas Instruments | — |
| BQ24074 | Texas Instruments | QFN-16 |
| BQ24074RGT | Texas Instruments | — |
| BQ24074RGTR | Texas Instruments | QFN-16 |
| BQ24074RGTT | Texas Instruments | QFN-16 |
| BQ24075 | Texas Instruments | — |
| BQ24079 | Texas Instruments | — |
| BQ2407X | Texas Instruments | — |
| BQ24230 | Texas Instruments | — |
| BQ24232 | Texas Instruments | — |
Get structured datasheet data via API
Get started free