10M25

Part: MAX 10 FPGA — Intel Type: Field-Programmable Gate Array (FPGA) Description: Intel MAX 10 FPGAs are single or dual supply devices with on-die voltage regulators, offering a wide range of I/O voltage support from 1.0 V to 3.3 V, and featuring user flash memory (UFM) and configuration flash memory (CFM) with 10,000 erase/reprogram cycles.

Operating Conditions:

• Supply voltage (VCC_ONE): 2.85/3.135 V to 3.15/3.465 V (single supply)
• Supply voltage (VCC): 1.15 V to 1.25 V (dual supply)
• Operating temperature: 0 to 85 °C (Commercial grade)
• I/O supply voltage (VCCIO): 0.95 V to 3.465 V (depending on setting)

Absolute Maximum Ratings:

• Max supply voltage (VCC_ONE, VCCIO, VCCA): 3.9 V (single supply)
• Max supply voltage (VCC, VCCD_PLL, VCCINT): 1.63 V (dual supply)
• Max supply voltage (VCCA, VCCA_ADC): 3.41 V (dual supply)
• Max DC input voltage (VI): 4.12 V
• Max DC output current per pin (IOUT): 25 mA
• Max storage temperature (TSTG): 150 °C
• Max junction temperature (TJ): 125 °C

Key Specs:

• Input pin leakage current (II): -10 μA to 10 μA (VI = 0 V to VCCIOMAX)
• Tristated I/O pin leakage current (IOZ): -10 μA to 10 μA (VO = 0 V to VCCIOMAX)
• ADC_VREF pin leakage current (Iadc_vref): 10 μA (single supply mode)
• ADC_VREF pin leakage current (Iadc_vref): 20 μA (dual supply mode)
• Bus-hold low, sustaining current: 8 μA (VCCIO = 1.2 V) to 70 μA (VCCIO = 3.0/3.3 V)
• Bus-hold high, sustaining current: -8 μA (VCCIO = 1.2 V) to -70 μA (VCCIO = 3.0/3.3 V)
• Series OCT with calibration accuracy: ±12 % (all VCCIO settings)
• Erase and reprogram cycles (E/P): 10,000 cycles/page
• Data retention duration: 20 years (at 85 °C)

Features:

• On-die voltage regulator
• User Flash Memory (UFM)
• Configuration Flash Memory (CFM)
• Phase-locked loop (PLL) regulator
• Analog-to-digital converter (ADC) block
• Bus hold feature for I/O pins
• On-chip termination (OCT) with and without calibration

Applications:

Package:

The following sections describe the operating conditions and power consumption of Intel MAX 10 devices.

This section defines the maximum operating conditions for Intel MAX 10 devices. The values are based on experiments conducted with the devices and theoretical modeling of breakdown and damage mechanisms. The functional operation of the device is not implied for these conditions.

This section lists the functional operation limits for the AC and DC parameters for Intel MAX 10 devices. The tables list the steady-state voltage values expected from Intel MAX 10 devices. Power supply ramps must all be strictly monotonic, without plateaus.