10M04

Part: 10M50DAF484C7G — Intel (MAX 10 FPGA family)

Type: FPGA (non-volatile, instant-on)

Description: Intel MAX 10 FPGA, 10M50 density, commercial grade with -C7 speed grade; the datasheet covers single and dual supply devices with 1.0–3.3 V I/O support.

Operating Conditions:

• Core supply (dual supply devices): VCC 1.15–1.25 V (1.2 V typ); VCCA 2.375–2.625 V
• Core supply (single supply devices): VCC_ONE 3.0 V (2.85–3.15 V) or 3.3 V (3.135–3.465 V)
• Operating junction temperature (commercial grade): 0 to 85 °C
• VCCIO options: 1.0, 1.2, 1.35, 1.5, 1.8, 2.5, 3.0 and 3.3 V

Absolute Maximum Ratings:

• Max supply voltage: VCC 1.63 V (dual supply); VCC_ONE 3.9 V (single supply); VCCIO 3.9 V; VCCA 3.41 V (dual supply) or 3.9 V (single supply)
• Max DC input voltage: 4.12 V
• Max DC output current per pin: ±25 mA
• Max operating junction temperature: 125 °C
• Storage temperature: -65 to 150 °C

Key Specs:

• I/O pin leakage current (input and tristated): ±10 μA max, VI/VO = 0 V to VCCIOMAX
• ADC_VREF pin leakage: 10 μA max (single supply mode), 20 μA max (dual supply mode)
• Series OCT without calibration: ±35% at 3.0 V and 2.5 V, ±40% at 1.8 V and 1.5 V (-C7 grade)
• Series OCT with calibration at power-up: ±12% accuracy at all VCCIO levels
• Bus-hold sustaining current: 70 μA min at VCCIO 3.0/3.3 V
• Maximum power supply ramp time: 10 ms
• PCI clamp diode DC current: 10 mA max
• Flash data retention: 20 years at 85 °C, 10 years at 100 °C (10,000 E/P cycles)

Features:

• Speed grades -C7 and -C8 for commercial devices
• Single and dual supply device options
• ADC block on the 10M50 (ADC I/O pins in Bank 1A)
• On-chip termination (OCT) with calibration
• Bus hold option on each I/O pin
• User flash memory (UFM) and configuration flash memory (CFM)
• Remote system upgrade and user watchdog circuitry
• PLLs

Applications:

Package:

• 484-pin package (F484, from the part number)

The following sections describe the operating conditions and power consumption of Intel MAX 10 devices.

This section defines the maximum operating conditions for Intel MAX 10 devices. The values are based on experiments conducted with the devices and theoretical modeling of breakdown and damage mechanisms. The functional operation of the device is not implied for these conditions.

This section lists the functional operation limits for the AC and DC parameters for Intel MAX 10 devices. The tables list the steady-state voltage values expected from Intel MAX 10 devices. Power supply ramps must all be strictly monotonic, without plateaus.