Texas Instruments Datasheets
2,418 Texas Instruments datasheets read into specs, pinouts and ratings, including Integrated Circuits, Switching Regulators (Buck) and Operational Amplifiers.
Texas Instruments datasheets, page 56
2,418 parts · page 56 of 81. Most used first, then by part number.
TCAN844DRQ1
Texas Instruments
AUTOMOTIVE CAN TRANSCEIVER WITH
TCAN844DRQ1.A
Texas Instruments
AEC-Q100 qualified fault-protected CAN FD transceiver with low-power standby mode and remote wake-up, compatible with ISO 11898-2:2024
TCAN844V
Texas Instruments
AEC-Q100 qualified fault-protected CAN FD transceiver with standby mode, remote wake-up and VIO logic-level translation (V suffix), ISO 11898-2:2024 compliant
TCAN844V-Q1
Texas Instruments
AEC-Q100 qualified, fault-protected CAN FD transceiver with standby mode, remote wake-up and VIO logic level translation, supporting 2 and 5Mbps data rates
TCAN844VDDFRQ1
Texas Instruments
Automotive cost-optimized CAN FD transceiver 8-SOT-23-THIN -40 to 150
TCAN844VDRBRQ1
Texas Instruments
Automotive cost-optimized CAN FD transceiver 8-SON -40 to 150
TCAN844VDRQ1
Texas Instruments
Automotive cost-optimized CAN FD transceiver 8-SOIC -40 to 150
TCAN844VDRQ1.A
Texas Instruments
AEC-Q100 qualified fault-protected CAN FD transceiver with VIO level shifting, standby mode with remote wake-up, and ±40V bus fault protection
THVD1406
Texas Instruments
THVD1406DRLR
Texas Instruments
THVD1426
Texas Instruments
THVD14X6
Texas Instruments
TL072
Texas Instruments
Low noise, high speed dual JFET input operational amplifier with high slew rate, low input bias/offset current and internal frequency compensation
TL072CP
Texas Instruments
IC OPAMP JFET 2 CIRCUIT 8DIP
TL072IP
Texas Instruments
Dual, 30V, 3MHz, high slew rate (13V/µs), In to V+ operational amplifier 8-PDIP -40 to 85
TL431ACDBZR
Texas Instruments
Three-terminal adjustable precision shunt regulator / programmable voltage reference with 1% initial tolerance (A grade), output adjustable from Vref (~2.5V) to 36V, 0.2 Ω typical output impedance and 1mA to 100mA sink capability.
TL431ACDR
Texas Instruments
Precision programmable three-terminal adjustable shunt regulator/reference, 1% initial tolerance (A grade), output adjustable from Vref (~2.5V) to 36V, 0°C to 70°C
TLC5940
Texas Instruments
16-channel constant-current sink LED driver with 12-bit (4096-step) grayscale PWM control and 6-bit dot correction stored in integrated EEPROM, with serial interface and LED open/thermal error detection
TLC5940-EP
Texas Instruments
TLC5940PWP
Texas Instruments
TLC5940PWPR
Texas Instruments
TLC5940PWPR.A
Texas Instruments
TLC5940PWPR.B
Texas Instruments
TLC5940PWPRG4
Texas Instruments
TLC5940RHBR
Texas Instruments
TLC5940RHBR.A
Texas Instruments
TLC5940RHBR.B
Texas Instruments
TLC5940RHBRG4
Texas Instruments
TLC5940S
Texas Instruments
TLE4275-Q1
Texas Instruments
Automotive-qualified monolithic 5-V LDO regulator with 450 mA output capability, power-on/undervoltage reset with programmable delay, and short-circuit, overtemperature and reverse-polarity protection