Integrated Circuits Datasheets
4,511 Integrated Circuits datasheets read into specs, pinouts and ratings. Parts from Texas Instruments, STMicroelectronics and Microchip Technology.
Integrated Circuits datasheets, page 81
4,511 parts · page 81 of 151. Most used first, then by part number.
MCP23017
Microchip Technology
16-bit remote bidirectional I/O port expander with high-speed I2C interface (up to 1.7 MHz), configurable interrupt outputs, and three hardware address pins for up to eight devices on the bus
MCP23S17
Microchip Technology
16-bit remote bidirectional I/O port expander with 10 MHz SPI interface, configurable interrupt outputs, and three hardware address pins for up to eight devices on the bus
MCP23X17
Microchip Technology
16-bit remote bidirectional I/O port expander with I2C (MCP23017) or SPI (MCP23S17) serial interface, configurable interrupt outputs, and hardware address pins
MCP2515
Microchip Technology
Stand-alone CAN V2.0B controller with SPI interface supporting 1 Mb/s, two receive buffers, three transmit buffers, six acceptance filters and two masks.
MCP2515-E/P
Microchip Technology
MCP2515-E/SO
Microchip Technology
IC CAN CONTROLLER W/SPI 18SOIC
MCP2515-I/ML
Microchip Technology
CAN Interface IC CAN controller w/SPI interface
MCP2515-I/P
Microchip Technology
MCP2515-I/SO
Microchip Technology
CAN Interface IC W/ SPI Interface
MCP2515-I/SOVAO
Microchip Technology
IC CANBUS CONTROLLER SPI 18SOIC
MCP2515-I/ST
Microchip Technology
MCP2515T
Microchip Technology
MCP2515T-E/ML
Microchip Technology
MCP2515T-I/ML
Microchip Technology
MCP2515T-I/SO
Microchip Technology
CAN Interface IC W/ SPI Interface
MCP2515T-I/ST
Microchip Technology
MCP2542WFDT-E
Microchip Technology
High-speed CAN FD transceiver supporting up to 8 Mbps with Wake-Up Pattern (WUP) per ISO 11898-2:2016, VIO pin for 1.8V-5V controller interfacing, AEC-Q100 Grade 0 qualified
MCP2551-E/P
Microchip Technology
Fault-tolerant high-speed CAN transceiver compliant with ISO-11898 that interfaces a CAN protocol controller to the physical bus at up to 1 Mb/s, with slope control, standby mode, and thermal shutdown.
MCP2551-E/SN
Microchip Technology
Fault-tolerant high-speed CAN transceiver interfacing a CAN protocol controller to the physical bus, ISO-11898 compliant, supporting up to 1 Mb/s with slope control and standby mode
MCP2551-I/P
Microchip Technology
High-speed, fault-tolerant CAN transceiver compliant with ISO-11898 that interfaces a CAN protocol controller to the physical bus, supporting up to 1 Mb/s with slope control and standby mode.
MCP2551-I/SN
Microchip Technology
High-speed, fault-tolerant CAN transceiver compliant with ISO-11898, supporting up to 1 Mb/s, interfacing a CAN protocol controller to the physical bus, with slope control and standby modes.
MCP2551T
Microchip Technology
High-speed, fault-tolerant CAN transceiver compliant with ISO-11898, supporting up to 1 Mb/s with slope control and standby mode; tape-and-reel version of MCP2551.
MCP2551T-I/SN
Microchip Technology
High-speed, fault-tolerant CAN transceiver interfacing a CAN protocol controller to the physical bus, ISO-11898 compliant, operating up to 1 Mb/s.
MCP3004
Microchip Technology
4-Channel, 10-Bit Successive Approximation A/D Converter with SPI Serial Interface and on-board sample and hold circuitry.
MCP3004/3008
Microchip Technology
2.7V-5.5V 4-channel (MCP3004) / 8-channel (MCP3008) 10-bit successive approximation A/D converter with on-chip sample and hold and SPI serial interface, up to 200 ksps
MCP3008-I/P
Microchip Technology
Analog to Digital Converters - ADC 10-bit SPI 8 Chl IND TEMP, PDIP16
MCP3008-I/SL
Microchip Technology
IC ADC 10BIT 16-SOIC
MCP3008T-E/SL
Microchip Technology
IC ADC 10BIT 16-SOIC
MCP3204
Microchip Technology
2.7V 4-channel 12-bit successive approximation A/D converter with on-chip sample and hold and SPI serial interface, up to 100 ksps
MCP3208
Microchip Technology
8-Channel 12-Bit Analog-to-Digital Converter with SPI Serial Interface and on-board sample and hold circuitry, offering single-ended or pseudo-differential inputs.