Integrated Circuits Datasheets

MAX78000FTHR#

Analog Devices

Rapid development platform for ultra-low-power AI applications using the MAX78000 dual-core Arm Cortex-M4F/RISC-V MCU with CNN accelerator, MAX20303 PMIC, camera, microphone, audio codec, and Feather-compatible headers

MAX9611

Analog Devices

High-side current-sense amplifier with integrated 12-bit I2C ADC and a configurable op amp/comparator gain block; MAX9611 has noninverting input-to-output configuration.

MAX9611AUB+T

Analog Devices

IC CURR SENSE 1 CIRCUIT 10UMAX

MAX98357A

Analog Devices

Low-cost PCM/I2S/TDM digital-input mono Class D speaker amplifier with filterless output, no MCLK required, and 3.2W output into 4Ω at 5V

MC14017B

onsemi

Five-stage Johnson decade counter with built-in code converter providing ten decoded, spike-free outputs, carry out for cascading, and fully static operation

MC14051B

onsemi

CMOS digitally-controlled analog switch implementing an SP8T (8-channel) multiplexer/demultiplexer with low ON impedance, very low OFF leakage, break-before-make switching, and 3-18 V supply range.

MC14052B

onsemi

CMOS digitally-controlled analog switch implementing a DP4T (dual 4-to-1) multiplexer/demultiplexer with low ON impedance and very low OFF leakage, passing analog signals up to the full supply range.

MC14053B

onsemi

CMOS digitally-controlled analog switch implementing a triple SPDT (3-channel 2:1) multiplexer/demultiplexer with break-before-make switching and low ON impedance

MC14069UB

onsemi

CMOS hex Schmitt trigger inverter (MC14584B) that can replace the MC14069UB hex inverter for enhanced noise immunity and squaring up slowly changing waveforms.

MC14094B

onsemi

CMOS 8-stage shift register with per-stage data latches and 3-state parallel outputs, plus dual serial outputs for cascading; useful for serial-to-parallel conversion.

MC14106B

onsemi

CMOS hex Schmitt trigger with six inverting Schmitt-trigger gates, 3-18V supply, double diode input protection, for squaring up slow waveforms and high noise immunity; the MC14106B is the greater-hysteresis pin-for-pin variant (replaces CD4

MC14584B

onsemi

CMOS hex Schmitt trigger with six inverting buffers for squaring up slowly changing waveforms and providing high noise immunity at low power dissipation

MC33269

onsemi

800 mA low dropout positive voltage regulator with 1.0 V dropout, current limiting and thermal shutdown for low input voltage applications; fixed 3.3/3.5/5.0/12 V and adjustable versions

MC34268

onsemi

800 mA low dropout positive voltage regulator (MC34268 is the 2.85 V fixed-output version of the MC33269 family) with 1.0 V dropout, current limiting and thermal shutdown

MC68HC912D60

Motorola

MC74HC/HCT485XA

onsemi

Automotive-customized 8-channel (4851A) / dual 4-channel (4852A) analog mux/demux with injection current effect control, pin compatible with HC405x/MC1405xB, low-power silicon gate CMOS

MC74HC00A

onsemi

High-performance silicon-gate CMOS quad 2-input NAND gate, pin-compatible with LS00, with outputs that interface directly to CMOS, NMOS and TTL.

MC74HC4851A

onsemi

Single-pole 8-position analog multiplexer/demultiplexer with injection current effect control, pin-compatible with HC4051, designed for automotive applications

MC74HC4852A

onsemi

Dual-pole 4-position analog multiplexer/demultiplexer with injection current effect control, pin compatible with HC405x, for automotive use

MC74HCT4851A

onsemi

Single-pole 8-position analog multiplexer/demultiplexer with injection current effect control, HCT-compatible inputs, designed for automotive use

MC74HCT4852A

onsemi

Dual-pole, 4-position analog multiplexer/demultiplexer (HCT, TTL-compatible inputs) with injection current effect control for automotive use; pin compatible with HC4052/MC14052B.

MC7805

onsemi

Monolithic positive fixed-voltage 5.0 V linear regulator delivering over 1.0 A, with internal current limiting, thermal shutdown and safe-area compensation.

MC7808

onsemi

Monolithic 3-terminal positive fixed 8.0 V linear voltage regulator delivering over 1.0 A with internal current limiting, thermal shutdown, and safe-area compensation.

MC7809

onsemi

Monolithic 1.0 A positive fixed 9 V three-terminal linear voltage regulator with internal current limiting, thermal shutdown and safe-area compensation

MC78M12AB

onsemi

500 mA fixed 12 V positive three-terminal linear voltage regulator with internal current limiting, thermal shutdown and safe-area compensation

MC78M12ABDT

onsemi

500 mA fixed 12 V positive three-terminal linear voltage regulator (high-accuracy ±2% A-series) with internal current limiting, thermal shutdown and safe-area compensation

MC78M12ABDTG

onsemi

500 mA fixed 12 V positive three-terminal linear voltage regulator, high-accuracy (±2%) A-grade, with internal current limiting, thermal shutdown and safe-area compensation

MC78M12ABT

onsemi

500 mA fixed 12 V positive three-terminal linear voltage regulator with internal current limiting, thermal shutdown and safe-area compensation; high-accuracy (±2%) A-suffix version

MC78M12ABTG

onsemi

500 mA, 12 V fixed positive three-terminal linear voltage regulator with internal current limiting, thermal shutdown and safe-area compensation; high-accuracy (±2%) A-suffix version

MC78M12AC

onsemi

Three-terminal 12 V fixed positive linear voltage regulator, 500 mA output with high accuracy (±2%) option, internal current limiting, thermal shutdown and safe-area compensation