Integrated Circuits Datasheets

MAX3443E

Analog Devices

±15kV ESD-protected, ±60V fault-protected, fail-safe, hot-swappable RS-485/RS-422 transceiver with 10Mbps data rate and low-power shutdown, supporting up to 128 transceivers on a bus

MAX3444E

Analog Devices

±15kV ESD-protected, ±60V fault-protected, fail-safe, hot-swappable J1708 transceiver with low-power shutdown, 250kbps data rate, supporting up to 128 transceivers on the bus

MAX481

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for data rates up to 2.5Mbps, low-current shutdown mode, and a fail-safe receiver input.

MAX483

Analog Devices

Low-power, slew-rate-limited half-duplex RS-485/RS-422 transceiver with one driver and one receiver, supporting up to 250kbps, low-current shutdown mode, and thermal shutdown protection.

MAX485

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, 2.5Mbps data rate, 5V supply, thermal shutdown and fail-safe receiver

MAX485C/D

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with fail-safe open-circuit receiver input and thermal shutdown protection.

MAX485CSA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with fail-safe receiver input and thermal shutdown

MAX485CUA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with thermal shutdown and fail-safe receiver

MAX485D

Analog Devices

MAX485DR

Analog Devices

MAX485EPA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, non-slew-rate-limited for data rates up to 2.5Mbps, operating from a single 5V supply with fail-safe receiver.

MAX485ESA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply

MAX485MJA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with unlimited slew-rate driver (up to 2.5Mbps), one driver and one receiver, single 5V supply, in military temperature range version.

MAX485P

Analog Devices

MAX487

Analog Devices

Low-power, slew-rate-limited half-duplex RS-485/RS-422 transceiver with quarter-unit-load receiver (up to 128 nodes on bus), shutdown mode, and data rates up to 250kbps

MAX488

Analog Devices

Low-power, slew-rate-limited full-duplex RS-485/RS-422 transceiver with one driver and one receiver, supporting data rates up to 250kbps from a single 5V supply.

MAX489

Analog Devices

Full-duplex, slew-rate-limited low-power RS-485/RS-422 transceiver with one driver and one receiver, driver/receiver enable pins and fail-safe receiver input, supporting data rates up to 250kbps

MAX48X/MAX1487

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver (one driver, one receiver) with quarter-unit-load receiver allowing up to 128 devices on the bus and up to 2.5Mbps data rate.

MAX490

Analog Devices

Low-power, full-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for data rates up to 2.5Mbps, operating from a single 5V supply.

MAX491

Analog Devices

Low-power full-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate up to 2.5Mbps, with driver/receiver enable pins and low-power shutdown, operating from a single 5V supply.

MAX5394

Analog Devices

Single 256-tap volatile linear-taper digital potentiometer with SPI interface, internal charge pump, shutdown modes, and 10k/50k/100k end-to-end resistance options.

MAX5394L

Analog Devices

Single 256-tap volatile linear taper digital potentiometer with 10kΩ end-to-end resistance, SPI interface, and 1.7V to 5.5V supply with internal charge pump

MAX5394LATA

Analog Devices

Single 256-tap volatile linear-taper digital potentiometer with 10kΩ end-to-end resistance, SPI interface, internal charge pump, and 1.7V to 5.5V single-supply operation

MAX5394M

Analog Devices

Single 256-tap volatile linear-taper digital potentiometer with SPI interface, 50kΩ end-to-end resistance, 1.7V to 5.5V single supply and internal charge pump allowing terminals up to 5.25V independent of VDD

MAX5394MATA

Analog Devices

Single 256-tap volatile linear taper digital potentiometer with 50kΩ end-to-end resistance, SPI interface, internal charge pump, and 1.7V to 5.5V supply operation

MAX5394N

Analog Devices

Single 256-tap volatile SPI linear taper digital potentiometer, 100kΩ end-to-end resistance, 1.7V to 5.5V supply with internal charge pump

MAX5394NATA

Analog Devices

Single 256-tap volatile linear taper digital potentiometer, 100kΩ end-to-end resistance (N variant), SPI interface, 1.7V to 5.5V supply with internal charge pump allowing 0-5.25V terminal voltages

MAX78000

Analog Devices

AI microcontroller with a hardware-based convolutional neural network (CNN) accelerator, designed for ultra-low power edge AI applications, featuring an Arm Cortex-M4 CPU, RISC-V coprocessor, and integrated memory.

MAX78000EXG

Analog Devices

Ultra-low-power Arm Cortex-M4F + RISC-V dual-core microcontroller with a hardware convolutional neural network accelerator for edge AI inference

MAX78000EXG+

Analog Devices

IC MCU 32BIT 512KB FLASH 81CTBGA