MC74HCT4852A

Part: MC74HC4851A, MC74HC4852A, MC74HCT4851A, MC74HCT4852A

Type: Analog Multiplexers/Demultiplexers

Description: These devices are pin-compatible analog multiplexers/demultiplexers featuring injection current effect control, making them suitable for automotive applications where input signals may exceed the supply voltage range without affecting the enabled analog channel. The MC74HC/HCT4851A is a single-pole, 8-position device, while the MC74HC/HCT4852A is a double-pole, 4-position device.

Operating Conditions:

• Supply voltage: 2.0 to 6.0 V (HC), 4.5 to 5.5 V (HCT)
• Operating temperature: -55 to +125 °C
• Static or Dynamic Voltage Across Switch (VIO*): 1.2 V

Absolute Maximum Ratings:

• Max supply voltage: 6.5 V
• Max input current, per pin: ±25 mA
• Max junction temperature: +150 °C

Key Specs:

• Max 'ON' Resistance (R_on): 1800 Ω (MC74HC4851A/4852A, VCC=2.0V, 125°C)
• Max Input Leakage Current (I_in): ±1.0 μA (digital pins, VCC=6.0V or 5.5V, 125°C)
• Max Quiescent Supply Current (I_CC): 40 μA (per package, VCC=6.0V or 5.5V, 125°C)
• Max Off-Channel Leakage Current (I_off): ±0.1 μA (VCC=6.0V or 5.5V, 125°C)
• Max Propagation Delay, Analog Input to Analog Output: 200 ns (MC74HC4851A/4852A, VCC=2.0V, 125°C)
• Max Input Capacitance (Digital Pins): 10 pF
• Max Shift of Output Voltage of Enabled Analog Channel (V D out): 20 mV (I in * ≤ 10 mA, R S ≤ 20 kΩ, VCC=5V, 125°C)

Features:

• Pin Compatible to HC405X and MC1405XB Devices
• Injection Current Cross-Coupling Less than 1 mV/mA
• Power Supply Range 2.0 to 6.0 V (HC), 4.5 to 5.5 V (HCT)
• Chip Complexity: 154 FETs or 36 Equivalent Gates
• In Compliance With the Requirements of JEDEC Standard No. 7 A
• -Q Suffix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable
• These Devices are Pb-Free, Halogen Free and are RoHS Compliant

Applications:

• Automotive applications

Package:

• SOIC-16
• TSSOP-16
• QFN-16

• Pin Compatible to HC405X and MC1405XB Devices
• Injection Current Cross -Coupling Less than 1 mV/mA (See Figure 10)
• Power Supply Range 2.0 to 6.0 V (HC), 4.5 to 5.5 V (HCT)
• Chip Complexity: 154 FETs or 36 Equivalent Gates
• In Compliance With the Requirements of JEDEC Standard No. 7 A
• -Q Suffix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC -Q100 Qualified and PPAP Capable
• These Devices are Pb -Free, Halogen Free and are RoHS Compliant

SOIC -16 D SUFFIX CASE 751B

TSSOP -16 DT SUFFIX

CASE 948F

SOIC -16 WIDE DW SUFFIX CASE 751G

1

QFN16 MN SUFFIX CASE 485AW

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.

1. Measured with minimum pad spacing on an FR4 board, using 76 mm -by -114 mm, 2 -ounce copper trace no air flow per JESD51 -7.

2. HBM tested to EIA / JESD22 -A114 -A. CDM tested to JESD22 -C101 -A. JEDEC recommends that ESD qualification to EIA/JESD22 -A115A (Machine Model) be discontinued.

Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability.

1. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open.