Integrated Circuits Datasheets
4,511 Integrated Circuits datasheets read into specs, pinouts and ratings. Parts from Texas Instruments, STMicroelectronics and Microchip Technology.
Integrated Circuits datasheets, page 33
4,511 parts · page 33 of 151. Most used first, then by part number.
DRV8353H
Texas Instruments
100-V triple half-bridge smart gate driver for BLDC motors with three integrated current shunt amplifiers and hardware (pin-strapped) interface; no integrated buck regulator in this variant.
DRV8353HRTAR
Texas Instruments
100-V triple half-bridge smart gate driver for three-phase BLDC motors with three integrated low-side current shunt amplifiers and hardware interface (no buck regulator in this variant)
DRV8353HRTAR.A
Texas Instruments
100-V triple half-bridge smart gate driver for BLDC motors with integrated triple current shunt amplifiers, hardware interface, and no buck regulator (DRV8353H variant)
DRV8353HRTAT
Texas Instruments
100-V triple half-bridge smart gate driver for BLDC motors with integrated triple current shunt amplifiers and hardware interface (no buck regulator), 250-unit small tape-and-reel orderable.
DRV8353HRTAT.A
Texas Instruments
100-V three-phase smart gate driver for BLDC motors with hardware interface, three integrated current shunt amplifiers, adjustable slew rate control, and shoot-through protection (no buck regulator in H variant)
DRV8353R
Texas Instruments
100-V triple half-bridge smart gate driver for 3-phase BLDC motors with integrated triple current shunt amplifiers and a 350-mA LM5008A buck regulator, available with SPI or hardware interface.
DRV8353RH
Texas Instruments
100-V three-phase BLDC smart gate driver with integrated triple current shunt amplifiers and 350-mA LM5008A buck regulator, hardware interface variant
DRV8353RS
Texas Instruments
Highly-integrated gate driver for three-phase brushless DC (BLDC) motor applications with integrated triple current shunt amplifiers and a 350-mA buck regulator.
DRV8353RSRGZR
Texas Instruments
IC MTR DRV MULTIPHAS 6-95V 48QFN
DRV8353RSRGZT
Texas Instruments
IC MTR DRV MULTIPHAS 6-95V 48QFN
DRV8353RX
Texas Instruments
Highly-integrated gate driver for three-phase brushless DC (BLDC) motor applications, featuring smart gate drive architecture, optional integrated current shunt amplifiers, and an optional buck regulator.
DRV8353S
Texas Instruments
100-V triple half-bridge smart gate driver for BLDC motors with SPI interface and three integrated low-side current shunt amplifiers, no buck regulator
DRV8353SRTAR
Texas Instruments
100-V three-phase smart gate driver for BLDC motors with SPI interface and integrated triple current shunt amplifiers (no buck regulator in the DRV8353S variant)
DRV8353SRTAR.A
Texas Instruments
100-V three-phase BLDC smart gate driver with SPI interface, integrated triple current shunt amplifiers, charge pump and low-side regulator, and protection features
DRV8353SRTAT
Texas Instruments
100-V triple half-bridge smart gate driver for 3-phase BLDC motors with three integrated low-side current shunt amplifiers and SPI interface (no buck regulator in this variant)
DRV8353SRTAT.A
Texas Instruments
100-V triple half-bridge smart gate driver for 3-phase BLDC motor applications with integrated triple current shunt amplifiers and SPI interface (DRV8353S variant, no buck regulator)
DRV8353XS
Texas Instruments
100-V triple half-bridge smart gate driver for BLDC motors with SPI interface and three integrated low-side current shunt amplifiers, no buck regulator
DRV8434A
Texas Instruments
Stepper motor driver with integrated current sensing, up to 1/256 microstepping indexer, SPI interface with STEP/DIR pins, smart tune decay and sensorless stall detection; 2.5-A full-scale output
DRV8434S
Texas Instruments
Stepper motor driver with two N-channel MOSFET H-bridges, 1/256 microstepping indexer, integrated current sensing, SPI interface, smart tune decay and sensorless stall detection, up to 2.5-A full-scale output.
DRV8434SPWPR
Texas Instruments
IC MOTOR DRIVER
DRV8434SPWPR.A
Texas Instruments
Integrated dual H-bridge stepper motor driver with SPI interface, STEP/DIR indexer up to 1/256 microstepping, integrated current sensing, smart tune decay, and sensorless stall detection
DRV8434SRGER
Texas Instruments
Motor/Motion/Ignition Controllers & Drivers 48-V 2.5-A bipolar s tepper motor driver
DRV8434SRGER.A
Texas Instruments
Dual H-bridge stepper motor driver with integrated current sensing, up to 1/256 microstepping indexer, SPI interface with STEP/DIR pins, smart tune decay, and sensorless stall detection.
DRV8833PWPR
Texas Instruments
IC MOTOR DRIVER PAR 16HTSSOP
DRV8874
Texas Instruments
Integrated motor driver with N-channel H-bridge, charge pump, current sensing and proportional output, current regulation, and protection circuitry.
DRV8874-Q1
Texas Instruments
DRV8874PWPR
Texas Instruments
DRV8874 H-BRIDGE MOTOR DRIVER
DRV8874PWPR.A
Texas Instruments
DRV8881
Texas Instruments
Dual H-bridge bipolar stepper / brushed-DC motor driver delivering up to 2.5-A peak (1.4-A rms) per bridge from a 6.5-45 V supply, with PH/EN (DRV8881E) or PWM (DRV8881P) control, multiple decay modes and integrated protection.
DRV8881E
Texas Instruments
2.5-A peak dual H-bridge bipolar stepper / brushed-DC motor driver with PH/EN interface, Smart tune decay, and integrated protection (DRV8881E variant).