ZD24C08A-STGMT
Serial EEPROMThe ZD24C08A-STGMT is a serial eeprom from Zetta. View the full ZD24C08A-STGMT datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.
ZD24C08A-STGMT shares its datasheet with ZD24C08A, whose page lists every part number it covers.
Official ZD24C08A-STGMT datasheet (PDF) — the source this page was extracted from.
ZD24C08A-STGMT Key Specifications
| Parameter | Value |
|---|---|
| Memory array | 8K bits (1024 X 8) EEPROM |
| Page size | 16 bytes |
| Byte Write time | 3 ms |
| Page Write time | 3 ms |
| Endurance | 1,000,000 Write Cycles |
| Data Retention | 100 Years |
| ESD (Human Body model) | 8000V |
ZD24C08A-STGMT Overview
Part: ZD24C08A — Zetta Device
Type: I2C-Compatible (2-wire) Serial EEPROM
Description: The ZD24C08A provides 8192 bits (1024 words of 8 bits each) of serial electrically erasable and programmable read-only memory (EEPROM) with a 1 MHz I2C-compatible interface, 16-byte page size, and 3 ms write cycle time.
Operating Conditions:
- Operating temperature: -40 to +85 °C
- Max clock speed: 1 MHz
Absolute Maximum Ratings:
- Max supply voltage: +6.5V
- Max junction/storage temperature: +150 °C
Key Specs:
- Memory array: 8K bits (1024 X 8) EEPROM
- Page size: 16 bytes
- Byte Write time: 3 ms
- Page Write time: 3 ms
- Endurance: 1,000,000 Write Cycles
- Data Retention: 100 Years
- ESD (Human Body model): 8000V
Features:
- Compatible with all I2C bidirectional data transfer protocol
- Random and sequential Read modes
- Write Protect Pin for Hardware Data Protection
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- Enhanced ESD/Latch-up protection
Applications:
- Industrial applications
- Commercial applications
Package:
- PDIP
- SOP
- TSSOP
- UDFN
- WLCSP4
ZD24C08A-STGMT Features
- Compatible with all I 2 C bidirectional data transfer protocol
- Memory array:
- -2K bits (256X 8)/ 4K bits (512 X 8) / 8K bits (1024 X 8) / 16K bits (2048 X 8) of EEPROM
- -Page size: 16 bytes
- Single supply voltage and high speed
- -1 MHz
- Random and sequential Read modes
- Write:
- -Byte Write within 3 ms
- -Page Write within 3 ms
- -Partial Page Writes Allowed
- Write Protect Pin for Hardware Data Protection
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- High Reliability
- Endurance: 1,000,000 Write Cycles
- Data Retention: 100 Years
- Enhanced ESD/Latch-up protection
- -HBM 8000V
- 8-lead PDIP/SOP/TSSOP/UDFN and WLCSP4 packages
ZD24C08A-STGMT Pin Configuration
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | NC | - | |
| 2 | NC | - | |
| 3 | NC | - | |
| 4 | GND | - | |
| 5 | SDA | - | |
| 6 | SCL | - | |
| 7 | WP | - | |
| 8 | VCC | - |
ZD24C08A-STGMT Electrical Characteristics
Applicable over recommended operating range from: TA = -40 °C to +85 °C , VCC = +1.7V to +5.5V (unless otherwise noted)
| Parameter | Symbol | Min | Typ | Max | Unit | Condition |
|---|---|---|---|---|---|---|
| Supply Voltage | V CC1 | 1.7 | - | 5.5 | V | - |
| Supply Voltage | V CC2 | 2.5 | - | 5.5 | V | - |
| Supply Current VCC=5.0V | I CC1 | - | 0.14 | 0.3 | mA | READ at 400KHZ |
| Supply Current VCC=5.0V | I CC2 | - | 0.28 | 0.5 | mA | WRITE at 400KHZ |
| Supply Current VCC=5.0V | I SB1 | - | 0.03 | 0.5 | μ A | V IN =V CC or V SS |
| Input Leakage Current | I L1 | - | 0.10 | 1.0 | μ A | V IN =V CC or V SS |
| Output Leakage Current | I LO | - | 0.05 | 1.0 | μ A | V OUT =V CC or V SS |
| Input Low Level | V IL1 | -0.3 | - | V CC ×0.3 | V | V CC =1.7V to 5.5V |
| Input High Level | V IH1 | VCC×0.7 | - | V CC +0.3 | V | V CC =1.7V to 5.5V |
| Output Low Level VCC=1.7V | V OL1 | - | - | 0.2 | V | I OL =0.15mA |
| Output Low Level VCC=5.0V | V OL2 | - | - | 0.4 | V | I OL =3.0mA |
ZD24C08A-STGMT Absolute Maximum Ratings
- DC Supply Voltage .............................................. -0.3V to +6.5V
- Input / Output Voltage ...................... GND-0.3V to VCC+0.3V
- Operating Ambient Temperature ............. -40 °C to +85 °C
- Storage Temperature ......................... -65 °C to +150 °C
- Electrostatic pulse (Human Body model) ......... 8000V
ZD24C08A-STGMT Ordering Information
| MPN | Package | Temperature Range | Packing |
|---|
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
Other Memory ICs
- CH347T – WCH, Serial SLC NAND Flash Memory
- M24512-DFMC6TG – STMicroelectronics, EEPROM
- ST25DV04KC-JF6L3 – STMicroelectronics, Dynamic NFC/RFID Tag IC
- ZD25WQ16CTIGT – Zetta, Serial Multi I/O NOR Flash
- AT25SL128A-MHE-T – Renesas Electronics, 128-Mbit SPI Serial NOR Flash
- W25Q32JVSSIQ – Winbond
- 23A1024 – Microchip Technology, Serial SRAM
- 23LC1024 – Microchip Technology, Serial SRAM
Ask your AI agent about the ZD24C08A-STGMT
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the ZD24C08A-STGMT run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.