ZD24C04A

Part: ZD24C08A — Zetta Device

Type: I2C-Compatible (2-wire) Serial EEPROM

Description: The ZD24C08A provides 8192 bits (1024 words of 8 bits each) of serial electrically erasable and programmable read-only memory (EEPROM) with a 1 MHz I2C-compatible interface, 16-byte page size, and 3 ms write cycle time.

Operating Conditions:

• Operating temperature: -40 to +85 °C
• Max clock speed: 1 MHz

Absolute Maximum Ratings:

• Max supply voltage: +6.5V
• Max junction/storage temperature: +150 °C

Key Specs:

• Memory array: 8K bits (1024 X 8) EEPROM
• Page size: 16 bytes
• Byte Write time: 3 ms
• Page Write time: 3 ms
• Endurance: 1,000,000 Write Cycles
• Data Retention: 100 Years
• ESD (Human Body model): 8000V

Features:

• Compatible with all I2C bidirectional data transfer protocol
• Random and sequential Read modes
• Write Protect Pin for Hardware Data Protection
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Enhanced ESD/Latch-up protection

Applications:

• Industrial applications
• Commercial applications

Package:

• PDIP
• SOP
• TSSOP
• UDFN
• WLCSP4

• Compatible with all I 2 C bidirectional data transfer protocol
• Memory array:
• -2K bits (256X 8)/ 4K bits (512 X 8) / 8K bits (1024 X 8) / 16K bits (2048 X 8) of EEPROM
• -Page size: 16 bytes
• Single supply voltage and high speed
• -1 MHz
• Random and sequential Read modes
• Write:
• -Byte Write within 3 ms
• -Page Write within 3 ms
• -Partial Page Writes Allowed
• Write Protect Pin for Hardware Data Protection
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• High Reliability
• Endurance: 1,000,000 Write Cycles
• Data Retention: 100 Years
• Enhanced ESD/Latch-up protection
• -HBM 8000V
• 8-lead PDIP/SOP/TSSOP/UDFN and WLCSP4 packages

Table 1-1.Pin Descriptions

Note:1. If the A2/A1/A0 or WP pin is not driven, it is internally pulled down to GND. In order to operate in a wide variety of application environments, the pull-down mechanism is intentionally designed to be somewhat strong. Once these pins are biased above the CMOS input buffer's trip point (~0.5 x VCC), the pull-down mechanism disengages. Zetta recommends connecting these pins to a known state whenever possible.

Table 1-1.Pin Descriptions

Applicable over recommended operating range from: TA = -40 °C to +85 °C , VCC = +1.7V to +5.5V (unless otherwise noted)

• DC Supply Voltage .............................................. -0.3V to +6.5V
• Input / Output Voltage ...................... GND-0.3V to VCC+0.3V
• Operating Ambient Temperature ............. -40 °C to +85 °C
• Storage Temperature ......................... -65 °C to +150 °C
• Electrostatic pulse (Human Body model) ......... 8000V