Skip to main content

TPS61178RNWR

The TPS61178RNWR is an electronic component from Texas Instruments. View the full TPS61178RNWR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

Manufacturer

Texas Instruments

Package

13-PowerVFQFN

Lifecycle

Active

Key Specifications

ParameterValue
Output Current10A (Switch)
Switching Frequency200kHz ~ 2.2MHz
FunctionStep-Up
Mounting TypeSurface Mount
Number of Outputs1
Operating Temperature-40°C ~ 125°C (TJ)
Output ConfigurationPositive
Output TypeAdjustable
Package / Case13-PowerVFQFN
Supplier Device Package13-VQFN-HR (3x3.5)
Supplier Device Package13-VQFN-HR (3x3.5)
Synchronous RectifierYes
TopologyBoost
Input Voltage (Max)20V
Input Voltage (Min)2.7V
Output Voltage (Max)20V
Output Voltage4.5V

Overview

Part: TPS61178x — Texas Instruments

Type: Synchronous Boost Converter

Description: A 2.7–20 V input, 4.5–20 V output synchronous boost converter with up to 10 A programmable switch peak current, integrating two 16-mΩ FETs, and achieving up to 96% efficiency.

Operating Conditions:

  • Supply voltage: 2.7–20 V
  • Operating temperature: -40 to 125 °C
  • Output voltage: 4.5–20 V
  • Effective inductance range: 0.47–3.3 μH

Absolute Maximum Ratings:

  • Max supply voltage: 23 V (VIN, SW, VOUT)
  • Max junction temperature: 150 °C
  • Max storage temperature: 150 °C

Key Specs:

  • Input voltage range: 2.7–20 V
  • Output voltage range: 4.5–20 V
  • High-side MOSFET on resistance: 16 mΩ (typ, VCC = 6 V)
  • Low-side MOSFET on resistance: 16 mΩ (typ, VCC = 6 V)
  • TPS61178 switch peak current limit: 8 A (typ, RLIMIT = 80.6 kΩ)
  • Output over-voltage protection threshold: 21 V (typ, VIN = 8 V, VOUT rising)
  • Quiescent current into VIN pin (IC enabled, no load, no ext. FET, VIN = 6 V, VOUT = 20 V, VFB = 1.3 V, TJ up to 85 °C): 1.5 μA (typ)
  • Shutdown current into VIN pin (IC disabled, VIN = 6 V, -40 °C ≤ TJ ≤ 85 °C): 1 μA (typ)

Features:

  • Programmable Switch Peak Current: up to 10 A
  • Two 16-mΩ FETs Integrated
  • Efficiency up to 96%
  • Adjustable Switching Frequency: up to 2.2 MHz
  • External Clock Synchronization: 200 kHz to 2.2 MHz
  • Gate Driver for Load Disconnect
  • Hiccup Short Protection
  • Over Voltage Protection
  • Auto PFM Operation (TPS61178) / Forced PWM Mode (TPS611781)

Applications:

  • Portable Speaker
  • Source Driver of LCD Display
  • Supply for the Power Amplifier
  • Supply for the Motor Driver
  • USB Type-C Power Delivery

Package:

  • QFN (13) 3.00 mm × 3.5 mm

Features

  • 1 · Input Voltage Range: 2.7 V to 20 V
  • Output Voltage Range: 4.5 V to 20 V
  • Programmable Switch Peak Current: up to 10 A
  • Two 16-m Ω FETs Integrated
  • Efficiency up to 96%: VIN = 7.2 V, VOUT = 16 V, IOUT = 2 A
  • Adjustable Switching Frequency: up to 2.2 MHz
  • External Clock Synchronization: 200 kHz to 2.2 MHz
  • Gate Driver for Load Disconnect
  • Hiccup Short Protection
  • Over Voltage Protection
  • Auto PFM Operation - TPS61178
  • Forced PWM Mode - TPS611781
  • 3.0-mm x 3.5-mm 13-pin VQFN Hotrod Package
  • Create a Custom Design Using the TPS61178 With the WEBENCH ® Power Designer

Applications

  • Portable Speaker
  • Source Driver of LCD Display
  • Supply for the Power Amplifier
  • Supply for the Motor Driver
  • USB Type-C Power Delivery

Pin Configuration

Electrical Characteristics

over operating free-air temperature range, VIN = 2.7 V to 14 V and VOUT = 16 V, VCC = 6 V, RLIMIT = 80.6 k Ω . Typical values are at T J = 25°C, (unless otherwise noted)

MINTYPMAXUNIT
POWER SUPPLYPOWER SUPPLYPOWER SUPPLYPOWER SUPPLYPOWER SUPPLYPOWER SUPPLYPOWER SUPPLY
V INInput voltage range2.720V
Input voltage under voltage lockoutV IN rising2.62.7V
V IN_UVLO(UVLO) thresholdV IN falling2.22.3
V IN_HYSVIN UVLO hysteresis400mV
V CCVCC regulation voltageICC = 5mA, VIN = 8V6V
V CC_UVLOVCC UVLO thresholdVCC falling2.1V
I Q (TPS61178)Quiescent current into V IN pinIC enabled, no load, no ext. FET V IN = 6 V, V OUT = 20 V, V FB = 1.3 V, T J up to 85 ⁰ C1.53μA
I Q (TPS61178)Quiescent current into V IN pinIC enabled, no load, no ext. FET V IN = 20 V, V OUT = 20 V, V FB = 1.3 V,T J up to 85 ⁰ C270320μA
I Q (TPS61178)Quiescent current into V OUT pinIC enabled, no load, no ext. FET V IN = 6 V, V FB = 1.3 V, V OUT = 20 V, T J up to 85 ⁰ C250300μA
Quiescent current into V OUT pinIC enabled, no load, no ext. FET V IN = 20 V, V OUT = 20 V, V FB = 1.3 V, T J up to 85 ⁰ C512μA
IC disabled, V IN = 6 V, -40 °C ≤ T J ≤ 85°C13.5μA
I SDShutdown current into V IN pinIC disabled, VIN = 20 V, -40 °C ≤ T J ≤ 85°C36μA
I LS_LKGReverse leakage current into SWIC disabled, VIN = V OUT = SW = 20 V -40 °C ≤ T ≤ 85°C0.16.5μA
OUTPUT VOLTAGEOUTPUT VOLTAGEOUTPUT VOLTAGEOUTPUT VOLTAGEOUTPUT VOLTAGEOUTPUT VOLTAGEOUTPUT VOLTAGE
V OUTOutput voltage rangeFreq = 500kHz4.520V
V OVPOutput over-voltage protection thresholdV IN = 8 V, V OUT rising20.52121.5V
POWER SWITCHESPOWER SWITCHESPOWER SWITCHESPOWER SWITCHESPOWER SWITCHESPOWER SWITCHESPOWER SWITCHES
R DS(on)High-side MOSFET on resistanceV CC = 6 V1625m Ω
Low-side MOSFET on resistanceV CC = 6 V1625m Ω
GmPower stage trans-conductance (peak current ratio with comp voltage)V CC = 6 V12A/V
CURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMITCURRENT LIMIT
I LIM_SWTPS61178R LIMIT = 80.6 k Ω6.489.4A
I LIM_SWTPS611781R LIMIT = 80.6 k Ω5.77.48.7A
I LIM_SHORTTPS61178 short current limit20A
VOLTAGE REFERNCEVOLTAGE REFERNCEVOLTAGE REFERNCEVOLTAGE REFERNCEVOLTAGE REFERNCEVOLTAGE REFERNCEVOLTAGE REFERNCE
PWM mode1.1801.1981.210V
V REFReference Voltage at FB pinPFM mode101%V REF
I FB_LKGLeakage current into FB pin1060nA
EN / SYNC LOGICEN / SYNC LOGICEN / SYNC LOGICEN / SYNC LOGICEN / SYNC LOGICEN / SYNC LOGICEN / SYNC LOGIC
V EN_HEN Logic high threshold1.2V
V EN_LEN Logic Low threshold0.4V

Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
Voltage range at terminals (2)BST-0.3SW + 7V
Voltage range at terminals (2)VIN, SW, VOUT, DISCRG, EN-0.323V
VCC, FB, COMP, FREQ / SYNC, ILIMIT-0.37V
T JOperating junction temperature-40150°C
T stgStorage temperature-65150°C

Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MINNOMMAXUNIT
V INInput voltage2.720V
V OUTOutputvoltage4.520V
LEffective inductance range0.473.3μH
R FBFeedback resistance (low side)200k Ω
T JOperating junction temperature-40125°C

Thermal Information

THERMAL METRIC(1)TPS61178 RNR (QFN Package) 12 PINSUNIT
R θ JAJunction-to-ambient thermal resistance60.2°C/W
R θ JC(top)Junction-to-case (top) thermal resistance28.6°C/W
R θ JBJunction-to-board thermal resistance14.5°C/W
ψ JTJunction-to-top characterization parameter0.4°C/W
ψ JBJunction-to-board characterization parameter14.5°C/W
R θ JC(bot)Junction-to-case (bottom) thermal resistance0.9°C/W

Typical Application

Related Variants

The following components are covered by the same datasheet.

Part NumberManufacturerPackage
TPS61178Texas InstrumentsVQFN-13
TPS611781Texas Instruments
TPS611781RNWRTexas Instruments
TPS611781RNWR.ATexas Instruments
TPS611781RNWTTexas Instruments
TPS611781RNWT.ATexas Instruments
TPS61178RNWR.ATexas Instruments
TPS61178RNWTTexas Instruments
TPS61178RNWT.ATexas Instruments
TPS61178XTexas Instruments
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free