TLV75518PDBVR
Low-Dropout Voltage RegulatorThe TLV75518PDBVR is a low-dropout voltage regulator from Texas Instruments. View the full TLV75518PDBVR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TLV75518PDBVR shares its datasheet with TLV75518P, whose page lists every part number it covers.
Official TLV75518PDBVR datasheet (PDF) — the source this page was extracted from.
TLV75518PDBVR Key Specifications
| Parameter | Value |
|---|---|
| Control Features | Enable |
| Output Current | 500mA |
| Quiescent Current | 31 µA |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature | -40°C ~ 125°C (TJ) |
| Output Configuration | Positive |
| Output Type | Fixed |
| Package / Case | SC-74A, SOT-753 |
| Packaging | MouseReel |
| Protection Features | Over Current, Over Temperature |
| PSRR | 52dB (1kHz ~ 1MHz) |
| Standard Pack Qty | 3000 |
| Supplier Device Package | SOT-23-5 |
| Input Voltage (Max) | 5.5V |
| Output Voltage | 1.8V |
| Dropout Voltage | 0.4V @ 500mA |
TLV75518PDBVR Overview
Part: TLV75518P — Texas Instruments
Type: Low-Dropout (LDO) Linear Regulator
Description: 500 mA, low-IQ (25 μA typ) LDO with 1.45–5.5 V input, fixed 0.6–5.0 V output options, ±1% typical accuracy, foldback current limit and active output discharge.
Operating Conditions:
- Input voltage: 1.45–5.5 V
- Output voltage: 0.6–5.0 V (fixed versions)
- Output current: 0 to 500 mA
- Operating junction temperature: -40 to 125 °C
Absolute Maximum Ratings:
- Max supply voltage (VIN): 6.0 V
- Max enable voltage (VEN): 6.0 V
- Max output voltage: VIN + 0.3 V
- Max junction temperature: 150 °C
- Storage temperature: -65 to 150 °C
Key Specs:
- Ground current (IOUT = 0 mA): 25 μA typ, 31 μA max at TJ = 25 °C; 40 μA max over -40 to 125 °C
- Shutdown current (VEN ≤ 0.4 V): 0.1 μA typ, 1 μA max
- Output accuracy: ±1% (-40 to 85 °C, DBV and DRV packages); ±1.5% (VOUT ≥ 1 V)
- Output current limit: 560 mA min, 720 mA typ, 865 mA max
- Short-circuit current limit: 355 mA typ (VOUT = 0 V)
- Dropout voltage (3.3 V ≤ VOUT < 5.0 V): 150 mV typ, 238 mV max (258 mV max for DYD package)
- PSRR: 46 dB at 100 kHz, 52 dB at 1 MHz (VIN = VOUT + 1 V, IOUT = 50 mA)
- Output noise: 71.5 μVRMS (10 Hz–100 kHz, VOUT = 1.2 V, IOUT = 50 mA)
- UVLO rising threshold: 1.3 V typ (1.21–1.44 V), 40 mV hysteresis
- Startup time: 550 μs typ
- Thermal shutdown: 165 °C typ
- Output pulldown resistance: 120 Ω typ
Features:
- Built-in soft-start with monotonic VOUT rise
- Foldback current limit
- Active output discharge
- Stable with a 1 μF ceramic output capacitor
- Integrated thermal shutdown and undervoltage lockout
- Enable pin (VHI ≥ 1 V, VLO ≤ 0.3 V)
- Thermally enhanced SOT-23-5 (DYD) option with RθJA of 60.3 °C/W
Applications:
- Set-top boxes, TV, and gaming consoles
- Portable and battery-powered equipment
- Desktops, notebooks, and ultrabooks
- Tablets and remote controls
- White goods and appliances
- Grid infrastructure and protection relays
- Camera modules and image sensors
Package:
- SOT-23-5 (DBV), 2.9 mm × 2.8 mm
- SOT-23-5 with thermal pad (DYD), 2.9 mm × 2.8 mm
- X2SON-4 (DQN), 1 mm × 1 mm
- WSON-6 (DRV), 2 mm × 2 mm
TLV75518PDBVR Features
- SOT-23-5 package with 60.3°C/W RθJA available
- Input voltage range: 1.45V to 5.5V
- Low IQ: 25μA (typical)
- Low dropout:
- -238mV (maximum) at 500mA (3.3VOUT)
- Output accuracy: 1% (maximum at 85°C)
- Built-in soft-start with monotonic V OUT rise
- Foldback current limit
- Active output discharge
- High PSRR: 46dB at 100kHz
- Stable with a 1μF ceramic output capacitor
- Packages:
- -2.9mm × 2.8mm SOT-23-5 (DBV)
- -2.9mm × 2.8mm SOT-23-5 (DYD) with thermal pad
- -1mm × 1mm X2SON-4 (DQN)
- -2mm × 2mm WSON-6 (DRV)
TLV75518PDBVR Applications
- Set-top boxes, TV, and gaming consoles
- Portable and battery-powered equipment
- Desktops, notebooks, and ultrabooks
- Tablets and remote controls
- White goods and appliances
- Grid infrastructure and protection relays
- Camera modules and image sensors
TLV75518PDBVR Pin Configuration
Figure 4-1. DQN Package, 4-Pin X2SON (Top View)
Figure 4-3. DYD Package, 5-Pin SOT-23 With Exposed Thermal Pad (Top View)
Figure 4-2. DBV Package, 5-Pin SOT-23 (Top View)
NC = no internal connection.
Figure 4-4. DRV Package, 6-Pin WSON With Exposed Thermal Pad (Top View)
TLV75518PDBVR Electrical Characteristics
at operating temperature range (TJ =-40°C to 125°C), VIN=VOUT(NOM) + 0.5V or 2.0V (whichever is greater), IOUT = 1mA, VEN = VIN, and CIN = COUT = 1μF (unless otherwise noted); all typical values at T J = 25°C
| PARAMETER | PARAMETER | TEST CONDITIONS | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| V IN | Input voltage | 1.45 | 5.5 | V | |||
| V OUT | Output voltage | 0.6 | 5.0 | V | |||
| -40°C ≤ T J ≤ +85°C, DBV and DRV package | -40°C ≤ T J ≤ +85°C, DBV and DRV package | -1 | 1 | % | |||
| V OUT ≥ 1.0V, DQN package | V OUT ≥ 1.0V, DQN package | -1.2 | 1.2 | % | |||
| Output accuracy | -40°C ≤ T J ≤ +85°C; 0.6V ≤ V OUT < 1.0V | -40°C ≤ T J ≤ +85°C; 0.6V ≤ V OUT < 1.0V | -10 | 10 | mV | ||
| V OUT ≥ 1V | V OUT ≥ 1V | -1.5 | 1.5 | % | |||
| 0.6V ≤ V OUT < 1V | 0.6V ≤ V OUT < 1V | -15 | 15 | mV | |||
| (ΔV OUT )ΔV IN | Line regulation | V OUT + 0.5V ≤ V IN ≤ 5.5V, V OUT > 1.5V | V OUT + 0.5V ≤ V IN ≤ 5.5V, V OUT > 1.5V | 2 | 2 | 2 | mV |
| 0.1mA ≤ I OUT | DQN package | 0.036 | V/A | ||||
| ΔV OUT /ΔI OUT | Load regulation | ≤ 500mA | DBV and DYD packages DRV package | 0.060 0.044 | V/A V/A | ||
| T J = 25°C, I OUT = 0mA | T J = 25°C, I OUT = 0mA | 14 | 25 | 31 | |||
| I GND | Ground current | -40°C ≤ T J ≤ +85°C, I OUT = 0mA -40°C ≤ T J ≤ +125°C, I OUT = 0mA | -40°C ≤ T J ≤ +85°C, I OUT = 0mA -40°C ≤ T J ≤ +125°C, I OUT = 0mA | 33 40 | μA | ||
| I SHDN | Shutdown current | V EN ≤ 0.4V, 1.4V ≤ V IN ≤ 5.5V, -40°C ≤ T J ≤ +125°C | V EN ≤ 0.4V, 1.4V ≤ V IN ≤ 5.5V, -40°C ≤ T J ≤ +125°C | 0.1 | 1 | μA | |
| V IN = V OUT + V DO(MAX) + | V OUT = V OUT - 0.2V, V OUT ≤ 1.5V | 560 | 720 | 865 | mA | ||
| I CL | Output current limit | 0.25V | V OUT = 0.9 x V OUT, 1.5V < V OUT ≤ 4.5V | 560 | 720 | 865 | mA |
| I SC | Short-circuit current limit | V OUT = 0V | V OUT = 0V | 355 | mA |
TLV75518PDBVR Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | |
|---|---|---|---|
| Supply voltage, V IN | -0.3 | 6.0 | V |
| Enable voltage, V EN | -0.3 | 6.0 | V |
| Output voltage, V OUT | -0.3 | V IN + 0.3 (2) | V |
| Operating junction temperature T J | -40 | 150 | °C |
| Storage temperature, T stg | -65 | 150 | °C |
TLV75518PDBVR Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| V IN | Input voltage | 1.45 | 5.5 | V | |
| V OUT | Output voltage | 0.6 | 5.0 | V | |
| V EN | Enable voltage | 0 | 5.5 | V | |
| I OUT | Output current | 0 | 500 | mA | |
| C IN | Input capacitor | 1 | μF | ||
| C OUT | Output capacitor | 1 | 200 | μF | |
| f EN | Enable toggle frequency | 10 | kHz | ||
| T J | Junction temperature | -40 | 125 | °C |
TLV75518PDBVR Thermal Information
| THERMAL METRIC (1) (2) | TLV755 - DYD (SOT-23-5) - 5 PINS | TLV755 - DQN (X2SON) - 4 PINS | TLV755 - DBV (SOT-23-5) - 5 PINS | TLV755 - DRV (WSON) - 6 PINS | ||
|---|---|---|---|---|---|---|
| R θJA | Junction-to-ambient thermal resistance | 60.3 | N/A | 100.8 | N/A | °C/W |
| ψ JT | Junction-to-top characterization parameter | 14.2 | N/A | 23.3 | N/A | °C/W |
| ψ JB | Junction-to-board characterization parameter | 35.9 | N/A | 67.8 | N/A | °C/W |
| R θJA | Junction-to-ambient thermal resistance | 92.5 | 168.4 | 231.1 | 100.2 | °C/W |
| R θJC(top) | Junction-to-case (top) thermal resistance | 119.8 | 139.1 | 118.4 | 108.5 | °C/W |
| R θJB | Junction-to-board thermal resistance | 45.8 | 101.4 | 64.4 | 64.3 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 16.7 | 5.6 | 28.4 | 10.4 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 44.9 | 101.7 | 63.8 | 64.8 | °C/W |
| R θJC(bot) | Junction-to-case (bottom) thermal resistance | 34.3 | 88.4 | N/A | 34.7 | °C/W |
TLV75518PDBVR Typical Application
TLV75518PDBVR Package Information
| PART NUMBER | PACKAGE (1) | PACKAGE SIZE (2) |
|---|---|---|
| TLV755P | DQN (X2SON, 4) | 1mm × 1mm |
| TLV755P | DBV (SOT-23, 5) | 2.9mm × 2.8mm |
| TLV755P | DYD (SOT-23, 5) | 2.9mm × 2.8mm |
| TLV755P | DRV (WSON, 6) | 2mm × 2mm |
- (1) For more information, see the Mechanical, Packaging, and Orderable Information .
- (2) The package size (length × width) is a nominal value and includes pins, where applicable.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TLV75518P | Texas Instruments | X2SON-4 (DQN) |
| TLV75518PDBVR.A | Texas Instruments | SOT-23-5 |
| TLV75518PDQNR | Texas Instruments | 4-XDFN Exposed Pad |
| TLV75518PDQNR.A | Texas Instruments | X2SON-4 1x1mm |
| TLV75518PDQNT | Texas Instruments | 4-XDFN Exposed Pad |
| TLV75518PDQNT.A | Texas Instruments | X2SON-4 1x1mm |
| TLV75518PDRVR | Texas Instruments | 6-WDFN Exposed Pad |
| TLV75518PDRVR.A | Texas Instruments | WSON-6 2x2mm |
| TLV75518PDYDR | Texas Instruments | SC-74A, SOT-753 |
| TLV75518PDYDR.A | Texas Instruments | SOT-23-5 |
| TLV755P | Texas Instruments | — |
Other Linear Regulators (LDO)
- LP5907MFX-3.3/NOPB – Texas Instruments, Low-Noise, Low-IQ LDO
- AP7343D-30FS4-7B – Diodes Incorporated, 300mA High PSRR Low-Noise LDO
- MC78M12ACDTRKG – onsemi, Positive Voltage Regulator
- LM317 – Texas Instruments, Adjustable Regulator
- ME6211C33M5G-N – Nanjing Micro One, High PSRR Low-Noise CMOS LDO Regulator
- R1191L – Nisshinbo, LDO Regulator
- AAT3221IGV-3.3-T1 – Skyworks Solutions, LDO Linear Regulator
- AMS1117 – Advanced Monolithic Systems, Low Dropout Voltage Regulator
All Linear Regulators (LDO) datasheetsAll Texas Instruments datasheets (2,418)
Ask your AI agent about the TLV75518PDBVR
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TLV75518PDBVR run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.