TJA1051T
High-speed CAN transceiverThe TJA1051T is a high-speed can transceiver from NXP USA Inc.. View the full TJA1051T datasheet below including key specifications.
Key Specifications
| Parameter | Value |
|---|---|
| CAN Data Rate | up to 1 Mbit/s |
| Supply Voltage (VCC) | 4.5 V to 5.5 V |
| TXD Dominant Time-Out | 0.3 ms to 12 ms |
| Communication Interface | CAN |
| Operating Current (ICC) | 0.1 mA to 70 mA |
| I/O Supply Voltage (VIO) | 2.8 V to 5.5 V |
| ESD Protection (CANH/CANL) | ±9 kV (HBM) |
| Operating Temperature Range | -40 °C to +125 °C |
Overview
Part: TJA1051 — NXP Semiconductors
Type: High-speed CAN transceiver
Description: High-speed CAN transceiver providing an interface between a CAN protocol controller and the physical two-wire CAN bus, suitable for up to 1 Mbit/s applications in 12 V and 24 V systems, with improved EMC and ESD performance.
Operating Conditions:
- Supply voltage (VCC): 4.5 V to 5.5 V
- I/O level adapter supply (VIO): 2.8 V to 5.5 V (for TJA1051T/3 and TJA1051TK/3)
- Operating temperature: -40 °C to +125 °C
- Max bit rate: 1 Mbit/s
Absolute Maximum Ratings:
- Max voltage on CANH and CANL: -58 V to +58 V
- Max voltage on any other pin: -0.3 V to +7 V
- Max virtual junction temperature: +150 °C
- Max storage temperature: -55 °C to +150 °C
Key Specs:
- Supply current (ICC, Normal mode, recessive): 2.5 mA (typ 5 mA, max 10 mA)
- Supply current (ICC, Normal mode, dominant): 20 mA (typ 50 mA, max 70 mA)
- Bus differential output voltage (V O(dif)bus): 1.5 V to 3 V (V TXD = 0 V; R L = 45 Ω to 65 Ω)
- Differential receiver threshold voltage (V th(RX)dif): 0.5 V (typ 0.7 V, max 0.9 V)
- Differential receiver hysteresis voltage (V hys(RX)dif): 50 mV (typ 120 mV, max 200 mV)
- TXD dominant time-out time (t to(dom)TXD): 0.3 ms (typ 1 ms, max 12 ms)
- Delay time from TXD to bus dominant (t d(TXD-busdom)): 65 ns (typ)
- Delay time from bus dominant to RXD (t d(busdom-RXD)): 60 ns (typ)
Features:
- Fully ISO 11898-2 compliant
- Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI)
- VIO input allows for direct interfacing with 3 V to 5 V microcontrollers (TJA1051T/3 and TJA1051TK/3 versions)
- High ElectroStatic Discharge (ESD) handling capability on bus pins
- TXD dominant time-out function
- Undervoltage detection on VCC and VIO pins
- Thermally protected
Applications:
- High-speed CAN networks in nodes not requiring standby mode with wake-up capability via the bus
- Automotive industry applications
Package:
- SO8 (SOT96-1)
- HVSON8 (SOT782-1)
Pin Configuration
| Symbol | Pin | Description |
|---|---|---|
| TXD | 1 | transmit data input |
| GND | 2 | ground supply |
| V CC | 3 | supply voltage |
| RXD | 4 | receive data output; reads out data from the bus lines |
| n.c. | 5 | not connected; in TJA1051T version only |
| V IO | 5 | supply voltage for I/O level adapter; in TJA1051T/3 and TJA1051TK/3 versions only |
| CANL | 6 | LOW-level CAN bus line |
| CANH | 7 | HIGH-level CAN bus line |
| S | 8 | Silent mode control input |
Thermal Information
According to IEC 60747-1.
| Symbol | Parameter | Conditions | Value | Unit |
|---|---|---|---|---|
| R th(vj-a) | thermal resistance from virtual junction to ambient | SO8 package; in free air | 155 | K/W |
| HVSON8 package; in free air | 55 | K/W |
Package Information
| UNIT | A max. | A 1 | A 2 | A 3 | b p | c | D (1) | E (2) | e | H E | L | L p | Q | v | w | y | (1) Z | q |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | 1.75 | 0.25 0.10 | 1.45 1.25 | 0.25 | 0.49 0.36 | 0.25 0.19 | 5.0 4.8 | 4.0 3.8 | 1.27 | 6.2 5.8 | 1.05 | 1.0 0.4 | 0.7 0.6 | 0.25 | 0.25 | 0.1 | 0.7 0.3 | 8 o |
| inches | 0.069 | 0.010 0.004 | 0.057 0.049 | 0.01 | 0.019 0.014 | 0.0100 0.0075 | 0.20 0.19 | 0.16 0.15 | 0.05 | 0.244 0.228 | 0.041 | 0.039 0.016 | 0.028 0.024 | 0.01 | 0.01 | 0.004 | 0.028 0.012 | 0 o |
| OUTLINE VERSION | REFERENCES | REFERENCES | REFERENCES | EUROPEAN PROJECTION | ISSUE DATE |
|---|---|---|---|---|---|
| OUTLINE VERSION | IEC | JEDEC | JEITA | ||
| SOT96-1 | 076E03 | MS-012 | 99-12-27 03-02-18 |
Fig 6. Package outline SOT96-1 (SO8)
Fig 6. Package outline SOT96-1 (SO8)
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| TJA1051 | NXP USA Inc. | — |
| TJA1051T/3 | NXP USA Inc. | SOP-8 |
| TJA1051TK/3 | NXP USA Inc. | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free