SARA-R500S
LTE-M/NB-IoT Cellular ModuleThe SARA-R500S is a lte-m/nb-iot cellular module from u-blox. View the full SARA-R500S datasheet below including key specifications.
Official SARA-R500S datasheet (PDF) — the source this page was extracted from.
Manufacturer
u-bloxCategory
RF / WirelessSARA-R500S Key Specifications
| Parameter | Value |
|---|---|
| Ordering Code | SARA-R500S-01B |
| Firmware (New) | 03.30, A00.01 |
| Firmware (Old) | 03.15, A00.01 |
| Hardware Change | eSE security chip and related passives removed, no PCB change |
| Type Number (New) | SARA-R500S-01B-01 |
| Type Number (Old) | SARA-R500S-01B-00 |
| Cellular Technology | LTE-M and NB-IoT |
| Firmware Update Methods | FOTA, μFOTA, FOAT, EasyFlash |
| Communication Interfaces | UART (AT commands), with DTR and RTS/CTS flow control |
| Estimated First Shipment | 2023CW30 |
SARA-R500S Overview
Part: SARA-R510S-01B — u-blox
Type: LTE-M / NB-IoT Cellular Module
Description: Cellular module supporting LTE-M and NB-IoT with updated firmware 03.30, TLS 1.2/1.3 security, and dynamic antenna tuning.
Features:
- Hardware revision removing the embedded Security (eSE) chip and associated passive components
- Support for TLS 1.2 and TLS 1.3 with ALPN extension
- SoftECC implementation to enhance file system robustness
- RTC-aware backoff timer management for power-optimized operation
- Dynamic antenna tuner configuration support
- Wi-Fi location support via ULOCEXT command and improved CellLocate data consistency
- Firmware update support via EasyFlash, FOAT, and FOTA/μFOTA
SARA-R500S Features
- Added new ULOCEXT command to support Wi-Fi location feature.
- [u-blox ID 562] Improved consistency of data in Cell Locate requests to ensure highest resolution rate.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| SARA-R500S-01B | u-blox | — |
| SARA-R510M8S-01B | u-blox | — |
| SARA-R510S | u-blox | — |
| SARA-R510S-01B | u-blox | — |
Other RF / Wireless
- ST25DV04KC-IE6S3 – STMicroelectronics, Dynamic NFC/RFID Tag IC
- SX1276 – Semtech, Low Power Long Range Transceiver
- XA2214-S14 – Xinluda Information Technology Co., Ltd, GaAs MMIC SPDT Switch
- CC1101 – Texas Instruments, RF Transceiver
- EG915UEUAC-N05-SNNSA – Quectel, LTE Cat 1 Cellular Module
- ESP32-S3 – Espressif Systems, Wireless SoC
- SMTSO2515CTJ – Sinhoo, Surface Mount Nut
- ESP32-WROOM-32 – Espressif Systems, Wi-Fi+BT+BLE MCU module
Ask your AI agent about the SARA-R500S
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the SARA-R500S run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.