PESD5V0X1BCSFYL

Part: PESD5V0X1BCSF — Nexperia

Type: Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode

Description: Ultra low capacitance bidirectional ESD protection diode in a DSN0603-2 (SOD962) leadless ultra small SMD package, offering 1.1 pF diode capacitance and ESD protection up to ±20 kV according to IEC 61000-4-2.

Operating Conditions:

• Operating temperature: -40 to 125 °C
• Reverse standoff voltage: 5 V

Absolute Maximum Ratings:

• Max peak pulse current: 7 A (t p = 8/20 μs)
• Max junction temperature: 150 °C
• Max ambient temperature: 125 °C
• Max storage temperature: 150 °C
• Max ESD voltage: ±20 kV (IEC 61000-4-2; contact discharge)
• Max ESD voltage: ±20 kV (IEC 61000-4-2; air discharge)

Key Specs:

• Reverse standoff voltage (V RWM): 5 V (T amb = 25 °C)
• Reverse leakage current (I RM): 1 nA (Typ), 50 nA (Max) at V RWM = 5 V, T amb = 25 °C
• Diode capacitance (C d): 1.1 pF (Max) at f = 1 MHz, V R = 0 V, T amb = 25 °C
• Breakdown voltage (V BR): 6 V (Min), 10 V (Typ) at I R = 1 mA, T amb = 25 °C
• Clamping voltage (V CL): 5.5 V (Max) at I PPM = 7 A, t p = 8/20 μs, T amb = 25 °C
• Dynamic resistance (R dyn): 0.25 Ω (Typ) at I R = 10 A, T amb = 25 °C

Features:

• Bidirectional ESD protection of one line
• Low diode capacitance Cd = 1.1 pF
• ESD protection up to ±20 kV according to IEC 61000-4-2
• Ultra small SMD package

Applications:

• Very sensitive interface lines
• Generic interface lines
• Portable electronics, communication, consumer and computing devices

Package:

• DSN0603-2 (SOD962-2) - Leadless ultra small package; 2 terminals; body 0.6 x 0.3 x 0.3 mm

• Bidirectional ESD protection of one line
• Low diode capacitance Cd = 1.1 pF
• ESD protection up to ±20 kV according to IEC 61000-4-2
• Ultra small SMD package

ESD and surge protection for:

• very sensitive interface lines
• generic interface lines

in portable electronics, communication, consumer and computing devices.

The device is designed for the protection of one bidirectional data line from surge pulses and ESD damage. The device is suitable on lines where the signal polarities are both positive and negative with respect to ground. The device is not designed to be used on lines connected to a DC supply.