KSZ9563RNX

Part: KSZ9563RNX, Microchip

Type: 3-Port Gigabit Ethernet Switch with RGMII/MII/RMII Interface and IEEE 1588v2 / 802.1AS

Key Specs:

• Ports: 3
• Integrated PHYs: Two 10/100/1000BASE-T
• External MAC Interface: One 10/100/1000 Ethernet MAC with configurable RGMII/MII/RMII
• Frame Buffer: 128kByte
• Forwarding Table: 4096 entries
• Jumbo Packet Support: Up to 9000 bytes
• Active VLAN Groups: 128
• VLAN IDs: Full range of 4096
• SPI Interface Speed: Up to 50MHz

Features:

• Non-blocking wire-speed Ethernet switching fabric
• Full-featured forwarding and filtering control, including Access Control List (ACL) filtering
• Full VLAN and QoS support
• EtherSynch® IEEE 1588v2 Precision Time Protocol (PTP) and IEEE 802.1AS/Qav Audio Video Bridging (AVB) support
• IEEE 802.1X port-based authentication support
• EtherGreen™ power management features, including low power standby and IEEE 802.3az
• Flexible management interface options: SPI, I2C, MIIM, and in-band management via any port
• Commercial/Industrial temperature range support
• LinkMD® cable diagnostic capabilities
• Rapid spanning tree protocol (RSTP) support
• Multiple spanning tree protocol (MSTP) support

Applications:

• Industrial Ethernet (Profinet, MODBUS, Ethernet/IP)
• Real-time Ethernet networks
• Industrial control/automation switches
• Networked measurement and control systems
• Test and measurement equipment

Package:

• VQFN: 64-pin (8 x 8mm) lead-free

• Switch Management Capabilities
  • 10/100/1000Mbps Ethernet switch basic functions: frame buffer management, address look-up table, queue management, MIB counters
  • Non-blocking store-and-forward switch fabric assures fast packet delivery by utilizing 4096 entry forwarding table with 128kByte frame buffer
  • Jumbo packet support up to 9000 bytes
  • Port mirroring/monitoring/sniffing:
  • ingress and/or egress traffic to any port
  • Rapid spanning tree protocol (RSTP) support for topology management and ring/linear recovery
  • Multiple spanning tree protocol (MSTP) support
• One Configurable External MAC Port
  • Reduced Gigabit Media Independent Interface (RGMII) v2.0
  • Reduced Media Independent Interface (RMII) v1.2 with 50MHz reference clock input/output option
  • Media Independent Interface (MII) in PHY/MAC mode
• Two Integrated PHY Ports
  • 1000BASE-T/100BASE-TX/10BASE-T IEEE 802.3
  • Fast Link-up option significantly reduces link-up time
  • Auto-negotiation and Auto-MDI/MDI-X support
  • Energy-Efficient Ethernet (EEE) support with lowpower idle mode and clock stoppage
  • On-chip termination resistors and internal biasing for differential pairs to reduce power
  • LinkMD® cable diagnostic capabilities for determining cable opens, shorts, and length
• Advanced Switch Capabilities
  • IEEE 802.1Q VLAN support for 128 active VLAN groups and the full range of 4096 VLAN IDs
  • IEEE 802.1p/Q tag insertion/removal on per port basis
  • VLAN ID tag/untag options on per port or VLAN basis
  • IEEE 802.3x full-duplex flow control and half-duplex back pressure collision control
  • IEEE 802.1X (Port-Based Network Access Control)
  • IGMP v1/v2/v3 snooping for multicast packet filtering
• IPv6 multicast listener discovery (MLD) snooping
• IPv4/IPv6 QoS support, QoS/CoS packet prioritization
• 802.1p QoS packet classification with 4 priority queues
• Programmable rate limiting at ingress/egress ports
• EtherSynch® IEEE 1588v2 PTP
  • Transparent Clock (TC) with auto correction update
  • Master and slave Ordinary Clock (OC) support
  • End-to-end (E2E) or peer-to-peer (P2P)
  • PTP multicast and unicast message support
  • PTP message transport over IPv4/v6 and IEEE 802.3
  • IEEE 1588v2 PTP packet filtering
  • Synchronous Ethernet support via recovered clock
• EtherSynch® Audio Video Bridging (AVB)
  • Compliant with IEEE 802.1BA/AS/Qat/Qav standards
  • gPTP time synchronization, credit-based traffic shaper
• Comprehensive Configuration Registers Access
  • High-speed 4-wire SPI (up to 50MHz), I2C interfaces provide access to all internal registers
  • MII Management (MIIM, MDC/MDIO 2-wire) Interface provides access to all PHY registers
• In-band management via any of the three ports
• I/O pin strapping facility to set certain register bits from I/O pins at reset time
• Power Management
  • IEEE 802.3az Energy Efficient Ethernet (EEE)
  • Energy detect power-down mode on cable disconnect
  • Dynamic clock tree control
  • Unused ports can be individually powered down
  • Full-chip software power-down
  • Wake-on-LAN (WoL) standby power mode

• Industrial Ethernet (Profinet, MODBUS, Ethernet/IP)
• Real-time Ethernet networks
• Industrial control/automation switches
• Networked measurement and control systems
• Test and measurement equipment