ISO7762F

Part: ISO7762DBQR — Texas Instruments (ISO776x family)

Type: Six-Channel Digital Isolator (3 forward / 3 reverse channels, SSOP-16 DBQ package)

Description: 2.25–5.5 V, 100 Mbps reinforced six-channel digital isolator with 3000 VRMS isolation (DBQ package), ±100 kV/μs typical CMTI and 11 ns typical propagation delay at 5 V.

Operating Conditions:

• Supply voltage (VCC1, VCC2): 2.25–5.5 V
• Operating temperature: -55 to +125 °C
• Data rate: 0–100 Mbps
• Output drive (IOH/IOL): ±4 mA at VCCO = 5 V, ±2 mA at 3.3 V, ±1 mA at 2.5 V

Absolute Maximum Ratings:

• Max supply voltage (VCC1, VCC2): 6 V
• Voltage at INx, OUTx: -0.5 V to VCCx + 0.5 V (not to exceed 6 V)
• Output current: ±15 mA
• Max junction temperature: 150 °C
• Storage temperature: -65 to 150 °C

Key Specs:

• Isolation rating (UL 1577, DBQ-16): 3000 VRMS
• Maximum surge isolation voltage VIOSM (DBQ-16): 10000 VPK
• Maximum transient isolation voltage VIOTM (DBQ-16): 4242 VPK
• Maximum repetitive peak isolation voltage VIORM (DBQ-16): 566 VPK
• Barrier capacitance (DBQ-16): ~0.9 pF
• UVLO: rising threshold 2 V typ (2.25 V max), falling threshold 1.8 V typ (1.7 V min), hysteresis 200 mV typ
• Input thresholds: VIH ≥ 0.7 × VCCI, VIL ≤ 0.3 × VCCI
• Thermal resistance RθJA (DBQ-16): 86.5 °C/W
• ESD: HBM ±6000 V, CDM ±1500 V, IEC 61000-4-2 contact across barrier ±8000 V

Features:

• 100 Mbps data rate
• Reinforced insulation, >30-year projected lifetime
• Typical CMTI ±100 kV/μs
• Level translation between 2.25 V and 5.5 V
• Default output high (ISO776x) or low (ISO776xF) options
• Low power consumption: typical 1.4 mA per channel at 1 Mbps
• Robust EMC: system-level ESD, EFT and surge immunity, low emissions
• Safety certifications: VDE (DIN EN IEC 60747-17), UL 1577, CSA, CQC, TUV
• Automotive version available: ISO776x-Q1

Applications:

• Industrial automation
• Motor control
• Power supplies
• Solar inverters
• Medical equipment

Package:

• SSOP (DBQ-16): 4.90 mm × 3.90 mm body (this part)
• SOIC (DW-16): 10.30 mm × 7.50 mm body (family option)

• 100 Mbps data rate
• Robust isolation barrier:
• ->30-Year projected lifetime
• -Up to 5000 VRMS isolation rating
• -Up to 12.8 kV surge capability
• -±100 kV/μs Typical CMTI
• Wide supply range: 2.25 V to 5.5 V
• 2.25-V to 5.5-V Level translation
• Default output high (ISO776x) and low (ISO776xF) Options
• Wide temperature range: -55°C to +125°C
• Low power consumption, typical 1.4 mA per channel at 1 Mbps
• Low propagation delay: 11 ns typical at 5 V
• Robust Electromagnetic Compatibility (EMC):
• -System-level ESD, EFT, and surge immunity
• -±8 kV IEC 61000-4-2 Contact discharge protection across isolation barrier
• -Low emissions
• Wide-SOIC (DW-16) and SSOP (DBQ-16) package options
• Automotive version available: ISO776x-Q1
• Safety-related certifications:
• -Reinforced insulation per DIN EN IEC 60747-17 (VDE 0884-17)
• -UL 1577 component recognition program
• -CSA Certification per IEC 62368-1 and IEC 60601-1
• -CQC Certification per GB4943.1
• -TUV Certification according to EN 62368-1 and EN 61010-1

• Industrial automation
• Motor control
• Power supplies
• Solar inverters
• Medical equipment

Figure 4-1. ISO7760 DW and DBQ Packages 16-Pin SOIC and SSOP Top View

Figure 4-2. ISO7761 DW and DBQ Packages 16-Pin SOIC and SSOP Top View

Figure 4-3. ISO7762 DW and DBQ Packages 16-Pin SOIC and SSOP Top View

Figure 4-4. ISO7763 DW and DBQ Packages 16-Pin SOIC and SSOP Top View

VCC1 = VCC2 = 5 V ± 10% (over recommended operating conditions unless otherwise noted)

See (1)

• (2) All voltage values except differential I/O bus voltages are with respect to the local ground terminal (GND1 or GND2) and are peak voltage values
• (3) Maximum voltage must not exceed 6 V.

The ISO776x family of devices is a high-performance, six-channel digital isolators. The ISO776x family of devices uses single-ended CMOS-logic switching technology. The voltage range is from 2.25 V to 5.5 V for both supplies, VCC1 and VCC2. When designing with digital isolators, keep in mind that because of the single-ended design structure, digital isolators do not conform to any specific interface standard and are only intended for isolating single-ended CMOS or TTL digital signal lines. The isolator is typically placed between the data controller (that is, μC or UART), and a data converter or a line transceiver, regardless of the interface type or standard.