AP7361C-33SPR
Low Dropout Linear RegulatorThe AP7361C-33SPR is a low dropout linear regulator from Diodes Incorporated. View the full AP7361C-33SPR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
AP7361C-33SPR shares its datasheet with AP7361C-33, whose page lists every part number it covers.
Official AP7361C-33SPR datasheet (PDF) — the source this page was extracted from.
Manufacturer
Diodes IncorporatedCategory
Linear Regulators (LDO)AP7361C-33SPR Key Specifications
| Parameter | Value |
|---|---|
| FB Reference Voltage (ADJ pin) | 0.792 V min, 0.8 V typ, 0.808 V max (I_OUT = 10mA, T_A = +25°C) |
| Input Quiescent Current (I_Q) | 60 μA typ, 80 μA max (Enabled, I_OUT = 0A) |
| Output Voltage Accuracy | ±1% (1.5V ≤ V_OUT ≤ 3.3V, I_OUT = 100mA, T_A = +25°C) |
| Dropout Voltage (V_DROPOUT) | 360 mV typ (at 1A, 3.3V output, from features) |
| Current Limit (I_LIMIT) | 1.1 A min, 1.5 A typ (V_IN = V_OUT +1V) |
| Power Supply Rejection Ratio (PSRR) | 75 dB typ (f = 1kHz, I_OUT = 100mA) |
| Start-Up Time (t_ST) | 150 μs typ (V_OUT = 3V, C_OUT = 2.2μF, R_L = 30Ω) |
| Thermal Shutdown Threshold (T_SHDN) | 150 °C typ |
AP7361C-33SPR Overview
Part: AP7361C from Diodes Incorporated
Type: 1A Low Dropout Linear Regulator (LDO)
Description: 2.2–6.0 V input, 1 A adjustable and fixed output voltage ultra-low dropout linear regulator with enable, featuring 60 μA typical quiescent current and ±1% output voltage accuracy.
Operating Conditions:
- Supply voltage: 2.2–6 V
- Operating temperature: -40 to +85 °C
- Output voltage range: 0.8–5 V
- Output current: 0–1 A
Absolute Maximum Ratings:
- Max supply voltage: 6.5 V
- Max junction temperature: +150 °C
- Max storage temperature: -65 to +150 °C
Key Specs:
- FB Reference Voltage (ADJ pin): 0.792 V min, 0.8 V typ, 0.808 V max (I_OUT = 10mA, T_A = +25°C)
- Input Quiescent Current (I_Q): 60 μA typ, 80 μA max (Enabled, I_OUT = 0A)
- Output Voltage Accuracy: ±1% (1.5V ≤ V_OUT ≤ 3.3V, I_OUT = 100mA, T_A = +25°C)
- Dropout Voltage (V_DROPOUT): 360 mV typ (at 1A, 3.3V output, from features)
- Current Limit (I_LIMIT): 1.1 A min, 1.5 A typ (V_IN = V_OUT +1V)
- Power Supply Rejection Ratio (PSRR): 75 dB typ (f = 1kHz, I_OUT = 100mA)
- Start-Up Time (t_ST): 150 μs typ (V_OUT = 3V, C_OUT = 2.2μF, R_L = 30Ω)
- Thermal Shutdown Threshold (T_SHDN): 150 °C typ
Features:
- Wide Input Voltage Range: 2.2V to 6.0V
- Output Voltage Accuracy: ± 1%
- Very Low Dropout Voltage (3.3V): 360mV at 1A Typical
- Low Quiescent Current (IQ): 60μ A Typical
- Adjustable Output Voltage Range: 0.8V to 5.0V
- Fixed Output Options: 1.0V, 1.2V, 1.5V, 1.8V, 2.5V, 2.8V and 3.3V
- High PSRR: 75dB @ 1kHz
- Current Limit: 1.5A
- Fold-Back Short Circuit Protection: 400mA
- Thermal Shutdown Protection
- Stable with MLCC, E-Cap, Tan-Cap or Solid Capacitor ≥ 2.2μ F
- Ambient Temperature Range: -40° C to +85° C
Applications:
- LCD-TV, Monitor
- Set-Top-Box
- Home Electrical Appliances
Package:
- U-DFN3030-8 (Type E)
- SOT89-5
- SOT223
- TO252 (DPAK)
- SO-8EP
AP7361C-33SPR Features
- Wide Input Voltage Range: 2.2V to 6.0V
- Output Voltage Accuracy: ± 1%
- Very Low Dropout Voltage (3.3V): 360mV at 1A Typical
- Low Quiescent Current (IQ): 60μ A Typical
- Adjustable Output Voltage Range: 0.8V to 5.0V
- Fixed Output Options: 1.0V, 1.2V, 1.5V, 1.8V, 2.5V, 2.8V and 3.3V
- High PSRR: 75dB @ 1kHz
- Current Limit: 1.5A
- Fold-Back Short Circuit Protection: 400mA
- Thermal Shutdown Protection
- Stable with MLCC, E-Cap, Tan-Cap or Solid Capacitor 2.2μ F
- Ambient Temperature Range: -40° C to +85° C
- Available in 'Green' Molding Compound (No Br, Sb)
- Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
- Halogen and Antimony Free. 'Green' Device (Note 3)
AP7361C-33SPR Applications
- LCD-TV, Monitor
- Set-Top-Box
- Home Electrical Appliances
AP7361C
AP7361C-33SPR Pin Configuration
- Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
- See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free.
- Halogen- and Antimony-free "Green' products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
NEW PRODUCT
ADVANCE INFORMATION
AP7361C-33SPR Electrical Characteristics
| Symbol | Parameter | Test Conditions | Min | Typ | Max | Unit | |
|---|---|---|---|---|---|---|---|
| V REF | FB Reference Voltage, ADJ pin | I OUT = 10mA, T A = +25° C | I OUT = 10mA, T A = +25° C | 0.792 | 0.8 | 0.808 | V |
| I ADJ | ADJ Pin Leakage Current | - | - | - | 0.1 | 0.5 | μA |
| I Q | Input Quiescent Current | Enabled, I OUT = 0A | Enabled, I OUT = 0A | - | 60 | 80 | μA |
| I SHDN | Input Shutdown Current | V EN = 0V, I OUT = 0A | V EN = 0V, I OUT = 0A | -1 | 0.05 | 1 | μA |
| V OUT | Output Voltage Accuracy | I OUT = 100mA, T A = +25° C | 1.0V≤V OUT < 1.5V | V OUT (s)- 0.015 | V OUT (s) | V OUT (s)+ 0.015 | V |
| V OUT | Output Voltage Accuracy | I OUT = 100mA, T A = +25° C | 1.5 V≤V OUT ≤3.3V | V OUT (s)* 0.99 | V OUT (s) | V OUT (s)* 1.01 | V |
| OUT V ΔV ΔV | Line Regulation | V IN = V OUT +1V to 5.5V, I OUT = 100mA | T A = +25° C | - | 0.01 | 0.1 | %/V |
| OUT V ΔV ΔV | Line Regulation | V IN = V OUT +1V to 5.5V, I OUT = 100mA | -40° C ≤T A ≤ +85° C | - | - | 0.2 | %/V |
| V OUT / V OUT | Load Regulation | I OUT from 1.0mA to 1A | 1.2V<V OUT ≤ 3.3V | -1.0 | - | 1.0 | % |
| V OUT / V OUT | Load Regulation | I OUT from 1.0mA to 1A | 1.0V≤V OUT ≤1.2V | -1.5 | - | 1.5 | % |
| V DROPOUT | Dropout Voltage (Note 7) | I OUT = 300mA | 1.0V≤V OUT < 1.1V | - | 710 | 750 | |
| V DROPOUT | Dropout Voltage (Note 7) | I OUT = 300mA | 1.1V≤V OUT < 1.2V | - | |||
| V DROPOUT | Dropout Voltage (Note 7) | I OUT = 300mA | 600 | 640 | |||
| V DROPOUT | Dropout Voltage (Note 7) | I OUT = 300mA | 1.2V≤V OUT < 1.3V | - | 500 | 540 | |
| V DROPOUT | Dropout Voltage (Note 7) | I OUT = 300mA | 1.3V≤V OUT < 1.4V | - | 400 | 440 | |
| V DROPOUT | Dropout Voltage (Note 7) | I OUT = 300mA | 1.4V≤V OUT < 1.5V | - | 300 | 340 | |
| V DROPOUT | Dropout Voltage (Note 7) | I OUT = 300mA | 1.5V≤V OUT < 2.6V | - | 200 | 250 | |
| V DROPOUT | Dropout Voltage (Note 7) | I OUT = 300mA | 2.6V≤V OUT ≤3.3V | - | 90 | 140 | |
| V DROPOUT | Dropout Voltage (Note 7) | 1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT < | 1.0V≤V OUT < 1.1V | - | 840 | - - | mV |
| V DROPOUT | Dropout Voltage (Note 7) | 1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT < | 1.2V | - | 780 | ||
| V DROPOUT | Dropout Voltage (Note 7) | 1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT < | 1.3V | - - | 710 660 | - - | |
| V DROPOUT | Dropout Voltage (Note 7) | 1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT < | 1.5V | - | 610 | - | |
| V DROPOUT | Dropout Voltage (Note 7) | 1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT < | 2.0V | - | 570 | - | |
| V DROPOUT | Dropout Voltage (Note 7) | 1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT < | 2.0V≤V OUT < 2.6V | - | 440 | - | |
| V DROPOUT | Dropout Voltage (Note 7) | 1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT < | 2.6V≤V OUT ≤3.3V | - | 340 | - | |
| V IL | EN Input Logic Low Voltage | - | - | 0 | - | 0.3 | V |
| V IH | EN Input Logic High Voltage | - | - | 1.0 | - | V IN | V |
| R ENPD | EN Pull-Down Resistor | - | - | - | 3.0 | - | MΩ |
| I EN | EN Input Leakage Current | V IN = 5.5V, V EN = 0V | V IN = 5.5V, V EN = 0V | -0.1 | - | 0.1 | μA |
| R PD | Output Discharge Resistor | V OL =1V | V OL =1V | - | 100 | - | Ω |
| I OUT | Maximum Output Current | V IN = V OUT +1V | V IN = V OUT +1V | 1.0 | - | - | A |
| I LIMIT | Current Limit | V IN = V OUT +1V ( V IN MINI =2.2V) | V IN = V OUT +1V ( V IN MINI =2.2V) | 1.1 | 1.5 | - | A |
| I SHORT | Short-Circuit Current | +1V, Output | Voltage < 15% V | mA | |||
| PSRR | Power Supply Rejection Ratio (Note 8) | OUT | - - | 400 | - - | dB | |
| PSRR | Power Supply Rejection Ratio (Note 8) | f = 1kHz, I OUT = 100mA = 100mA | f = 1kHz, I OUT = 100mA = 100mA | - | 75 55 | - | |
| t ST | Start-Up Time | OUT V OUT = 3V, C OUT = 2.2μ F, R L = 30Ω | OUT V OUT = 3V, C OUT = 2.2μ F, R L = 30Ω | - | 150 | - | μs |
| OUT OUT V ΔT ΔV | Output Voltage Temperature Coefficient | I = 100mA, -40° C ≤ T A ≤ +85° C | I = 100mA, -40° C ≤ T A ≤ +85° C | - | ±100 | - | ppm/° C |
| A T SHDN | Thermal Shutdown Threshold | - | - | - | 150 | - | ° C |
| T HYS | Thermal Shutdown Hysteresis | - | - | - | 20 | - | ° C |
Notes: 7. Dropout voltage is the voltage difference between the input and the output at which the output voltage drops 2% below its nominal value. This parameter only applies to output voltages above 1.2V since minimum VIN = 2.2V.
- For VIN 2.5V and VIN = VOUT +1V. For VIN < 2.5V, the PSRR performance may be reduced.
NEW PRODUCT
ADVANCE INFORMATION
AP7361C
AP7361C-33SPR Absolute Maximum Ratings
| Symbol | Parameter | Parameter | Rating | Unit |
|---|---|---|---|---|
| V IN | Input Voltage | Input Voltage | 6.5 | V |
| - | OUT, ADJ, EN Voltage | OUT, ADJ, EN Voltage | V IN +0.3 | V |
| T J | Operating Junction Temperature Range | Operating Junction Temperature Range | -40 to +150 | ° C |
| T STG | Storage Temperature Range | Storage Temperature Range | -65 to +150 | ° C |
| P D | Power Dissipation | Power Dissipation | Internally limited by maximum junction temperature of +150° C | - |
| P D | Power Dissipation | U-DFN3030-8 (Type E) | 1700 | mW |
| P D | Power Dissipation | TO252 (DPAK) | 1250 | mW |
| P D | Power Dissipation | SOT223 | 1100 | mW |
| P D | Power Dissipation | SOT89-5 | 800 | mW |
| P D | Power Dissipation | SO-8EP | 1190 | mW |
| ESD HBM | Human Body Model ESD Protection | Human Body Model ESD Protection | > 2 | KV |
| ESD MM | Machine Model ESD Protection (Note 5) | Machine Model ESD Protection (Note 5) | > 200 | V |
AP7361C-33SPR Recommended Operating Conditions
| Symbol | Parameter | Min | Max | Unit |
|---|---|---|---|---|
| V IN | Input Voltage | 2.2 | 6 | V |
| V OUT | Output Voltage | 0.8 | 5 | V |
| I OUT | Output Current (Note 6) | 0 | 1 | A |
| T A | Operating Ambient Temperature | -40 | 85 | C |
AP7361C
NEW PRODUCT
ADVANCE INFORMATION
AP7361C
AP7361C-33SPR Thermal Information
Thermal protection disables the output when the junction temperature rises to approximately +150° C, allowing the device to cool down. When the junction temperature reduces to approximately +130° C the output circuitry is enabled again. Depending on power dissipation, thermal resistance, and ambient temperature, the thermal protection circuit may cycle on and off. This cycling limits the heat dissipation of the regulator, protecting it from damage due to overheating.
AP7361C-33SPR Typical Application
AP7361C-33SPR Package Information
Other Linear Regulators (LDO)
- LP5907MFX-3.3/NOPB – Texas Instruments, Low-Noise, Low-IQ LDO
- AP7343D-30FS4-7B – Diodes Incorporated, 300mA High PSRR Low-Noise LDO
- MC78M12ACDTRKG – onsemi, Positive Voltage Regulator
- ME6211C33M5G-N – Nanjing Micro One, High PSRR Low-Noise CMOS LDO Regulator
- LM317 – Texas Instruments, Adjustable Regulator
- AAT3221IGV-3.3-T1 – Skyworks Solutions, LDO Linear Regulator
- AMS1117 – Advanced Monolithic Systems, Low Dropout Voltage Regulator
- AMS1117-1.2 – EVVO, Low Dropout Regulator
All Linear Regulators (LDO) datasheetsAll Diodes datasheets (217)
Ask your AI agent about the AP7361C-33SPR
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the AP7361C-33SPR run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.