AP7361C-33

Low Dropout Linear Regulator

The AP7361C-33 is a low dropout linear regulator from Diodes Incorporated. View the full AP7361C-33 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

Official AP7361C-33 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Diodes Incorporated

AP7361C-33 Key Specifications

Parameter	Value
FB Reference Voltage (ADJ pin)	0.792 V min, 0.8 V typ, 0.808 V max (I_OUT = 10mA, T_A = +25°C)
Input Quiescent Current (I_Q)	60 μA typ, 80 μA max (Enabled, I_OUT = 0A)
Output Voltage Accuracy	±1% (1.5V ≤ V_OUT ≤ 3.3V, I_OUT = 100mA, T_A = +25°C)
Dropout Voltage (V_DROPOUT)	360 mV typ (at 1A, 3.3V output, from features)
Current Limit (I_LIMIT)	1.1 A min, 1.5 A typ (V_IN = V_OUT +1V)
Power Supply Rejection Ratio (PSRR)	75 dB typ (f = 1kHz, I_OUT = 100mA)
Start-Up Time (t_ST)	150 μs typ (V_OUT = 3V, C_OUT = 2.2μF, R_L = 30Ω)
Thermal Shutdown Threshold (T_SHDN)	150 °C typ

AP7361C-33 Overview

Part: AP7361C from Diodes Incorporated

Type: 1A Low Dropout Linear Regulator (LDO)

Description: 2.2–6.0 V input, 1 A adjustable and fixed output voltage ultra-low dropout linear regulator with enable, featuring 60 μA typical quiescent current and ±1% output voltage accuracy.

Operating Conditions:

Supply voltage: 2.2–6 V
Operating temperature: -40 to +85 °C
Output voltage range: 0.8–5 V
Output current: 0–1 A

Absolute Maximum Ratings:

Max supply voltage: 6.5 V
Max junction temperature: +150 °C
Max storage temperature: -65 to +150 °C

Key Specs:

FB Reference Voltage (ADJ pin): 0.792 V min, 0.8 V typ, 0.808 V max (I_OUT = 10mA, T_A = +25°C)
Input Quiescent Current (I_Q): 60 μA typ, 80 μA max (Enabled, I_OUT = 0A)
Output Voltage Accuracy: ±1% (1.5V ≤ V_OUT ≤ 3.3V, I_OUT = 100mA, T_A = +25°C)
Dropout Voltage (V_DROPOUT): 360 mV typ (at 1A, 3.3V output, from features)
Current Limit (I_LIMIT): 1.1 A min, 1.5 A typ (V_IN = V_OUT +1V)
Power Supply Rejection Ratio (PSRR): 75 dB typ (f = 1kHz, I_OUT = 100mA)
Start-Up Time (t_ST): 150 μs typ (V_OUT = 3V, C_OUT = 2.2μF, R_L = 30Ω)
Thermal Shutdown Threshold (T_SHDN): 150 °C typ

Features:

Wide Input Voltage Range: 2.2V to 6.0V
Output Voltage Accuracy: ± 1%
Very Low Dropout Voltage (3.3V): 360mV at 1A Typical
Low Quiescent Current (IQ): 60μ A Typical
Adjustable Output Voltage Range: 0.8V to 5.0V
Fixed Output Options: 1.0V, 1.2V, 1.5V, 1.8V, 2.5V, 2.8V and 3.3V
High PSRR: 75dB @ 1kHz
Current Limit: 1.5A
Fold-Back Short Circuit Protection: 400mA
Thermal Shutdown Protection
Stable with MLCC, E-Cap, Tan-Cap or Solid Capacitor ≥ 2.2μ F
Ambient Temperature Range: -40° C to +85° C

Applications:

LCD-TV, Monitor
Set-Top-Box
Home Electrical Appliances

Package:

U-DFN3030-8 (Type E)
SOT89-5
SOT223
TO252 (DPAK)
SO-8EP

AP7361C-33 Features

Wide Input Voltage Range: 2.2V to 6.0V
Output Voltage Accuracy: ± 1%
Very Low Dropout Voltage (3.3V): 360mV at 1A Typical
Low Quiescent Current (IQ): 60μ A Typical
Adjustable Output Voltage Range: 0.8V to 5.0V
Fixed Output Options: 1.0V, 1.2V, 1.5V, 1.8V, 2.5V, 2.8V and 3.3V
High PSRR: 75dB @ 1kHz
Current Limit: 1.5A
Fold-Back Short Circuit Protection: 400mA
Thermal Shutdown Protection
Stable with MLCC, E-Cap, Tan-Cap or Solid Capacitor 2.2μ F
Ambient Temperature Range: -40° C to +85° C
Available in 'Green' Molding Compound (No Br, Sb)
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. 'Green' Device (Note 3)

AP7361C-33 Applications

LCD-TV, Monitor
Set-Top-Box
Home Electrical Appliances

AP7361C

AP7361C-33 Pin Configuration

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.

See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free.
Halogen- and Antimony-free "Green' products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

NEW PRODUCT

ADVANCE INFORMATION

AP7361C-33 Electrical Characteristics

Symbol	Parameter	Test Conditions		Min	Typ	Max	Unit
V REF	FB Reference Voltage, ADJ pin	I OUT = 10mA, T A = +25° C	I OUT = 10mA, T A = +25° C	0.792	0.8	0.808	V
I ADJ	ADJ Pin Leakage Current	-	-	-	0.1	0.5	μA
I Q	Input Quiescent Current	Enabled, I OUT = 0A	Enabled, I OUT = 0A	-	60	80	μA
I SHDN	Input Shutdown Current	V EN = 0V, I OUT = 0A	V EN = 0V, I OUT = 0A	-1	0.05	1	μA
V OUT	Output Voltage Accuracy	I OUT = 100mA, T A = +25° C	1.0V≤V OUT < 1.5V	V OUT (s)- 0.015	V OUT (s)	V OUT (s)+ 0.015	V
V OUT	Output Voltage Accuracy	I OUT = 100mA, T A = +25° C	1.5 V≤V OUT ≤3.3V	V OUT (s)* 0.99	V OUT (s)	V OUT (s)* 1.01	V
OUT V ΔV ΔV	Line Regulation	V IN = V OUT +1V to 5.5V, I OUT = 100mA	T A = +25° C	-	0.01	0.1	%/V
OUT V ΔV ΔV	Line Regulation	V IN = V OUT +1V to 5.5V, I OUT = 100mA	-40° C ≤T A ≤ +85° C	-	-	0.2	%/V
V OUT / V OUT	Load Regulation	I OUT from 1.0mA to 1A	1.2V<V OUT ≤ 3.3V	-1.0	-	1.0	%
V OUT / V OUT	Load Regulation	I OUT from 1.0mA to 1A	1.0V≤V OUT ≤1.2V	-1.5	-	1.5	%
V DROPOUT	Dropout Voltage (Note 7)	I OUT = 300mA	1.0V≤V OUT < 1.1V	-	710	750
V DROPOUT	Dropout Voltage (Note 7)	I OUT = 300mA	1.1V≤V OUT < 1.2V	-
V DROPOUT	Dropout Voltage (Note 7)	I OUT = 300mA			600	640
V DROPOUT	Dropout Voltage (Note 7)	I OUT = 300mA	1.2V≤V OUT < 1.3V	-	500	540
V DROPOUT	Dropout Voltage (Note 7)	I OUT = 300mA	1.3V≤V OUT < 1.4V	-	400	440
V DROPOUT	Dropout Voltage (Note 7)	I OUT = 300mA	1.4V≤V OUT < 1.5V	-	300	340
V DROPOUT	Dropout Voltage (Note 7)	I OUT = 300mA	1.5V≤V OUT < 2.6V	-	200	250
V DROPOUT	Dropout Voltage (Note 7)	I OUT = 300mA	2.6V≤V OUT ≤3.3V	-	90	140
V DROPOUT	Dropout Voltage (Note 7)	1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT <	1.0V≤V OUT < 1.1V	-	840	- -	mV
V DROPOUT	Dropout Voltage (Note 7)	1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT <	1.2V	-	780
V DROPOUT	Dropout Voltage (Note 7)	1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT <	1.3V	- -	710 660	- -
V DROPOUT	Dropout Voltage (Note 7)	1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT <	1.5V	-	610	-
V DROPOUT	Dropout Voltage (Note 7)	1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT <	2.0V	-	570	-
V DROPOUT	Dropout Voltage (Note 7)	1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT <	2.0V≤V OUT < 2.6V	-	440	-
V DROPOUT	Dropout Voltage (Note 7)	1.1V≤V OUT < 1.2V≤V OUT < 1.3V≤V OUT < 1.4V 1.4V≤V OUT < 1.5V≤V OUT <	2.6V≤V OUT ≤3.3V	-	340	-
V IL	EN Input Logic Low Voltage	-	-	0	-	0.3	V
V IH	EN Input Logic High Voltage	-	-	1.0	-	V IN	V
R ENPD	EN Pull-Down Resistor	-	-	-	3.0	-	MΩ
I EN	EN Input Leakage Current	V IN = 5.5V, V EN = 0V	V IN = 5.5V, V EN = 0V	-0.1	-	0.1	μA
R PD	Output Discharge Resistor	V OL =1V	V OL =1V	-	100	-	Ω
I OUT	Maximum Output Current	V IN = V OUT +1V	V IN = V OUT +1V	1.0	-	-	A
I LIMIT	Current Limit	V IN = V OUT +1V ( V IN MINI =2.2V)	V IN = V OUT +1V ( V IN MINI =2.2V)	1.1	1.5	-	A
I SHORT	Short-Circuit Current	+1V, Output	Voltage < 15% V				mA
PSRR	Power Supply Rejection Ratio (Note 8)		OUT	- -	400	- -	dB
PSRR	Power Supply Rejection Ratio (Note 8)	f = 1kHz, I OUT = 100mA = 100mA	f = 1kHz, I OUT = 100mA = 100mA	-	75 55	-
t ST	Start-Up Time	OUT V OUT = 3V, C OUT = 2.2μ F, R L = 30Ω	OUT V OUT = 3V, C OUT = 2.2μ F, R L = 30Ω	-	150	-	μs
OUT OUT V ΔT ΔV	Output Voltage Temperature Coefficient	I = 100mA, -40° C ≤ T A ≤ +85° C	I = 100mA, -40° C ≤ T A ≤ +85° C	-	±100	-	ppm/° C
A T SHDN	Thermal Shutdown Threshold	-	-	-	150	-	° C
T HYS	Thermal Shutdown Hysteresis	-	-	-	20	-	° C

Notes: 7. Dropout voltage is the voltage difference between the input and the output at which the output voltage drops 2% below its nominal value. This parameter only applies to output voltages above 1.2V since minimum VIN = 2.2V.

For VIN 2.5V and VIN = VOUT +1V. For VIN < 2.5V, the PSRR performance may be reduced.

NEW PRODUCT

ADVANCE INFORMATION

AP7361C

AP7361C-33 Absolute Maximum Ratings

Symbol	Parameter	Parameter	Rating	Unit
V IN	Input Voltage	Input Voltage	6.5	V
-	OUT, ADJ, EN Voltage	OUT, ADJ, EN Voltage	V IN +0.3	V
T J	Operating Junction Temperature Range	Operating Junction Temperature Range	-40 to +150	° C
T STG	Storage Temperature Range	Storage Temperature Range	-65 to +150	° C
P D	Power Dissipation	Power Dissipation	Internally limited by maximum junction temperature of +150° C	-
P D	Power Dissipation	U-DFN3030-8 (Type E)	1700	mW
P D	Power Dissipation	TO252 (DPAK)	1250	mW
P D	Power Dissipation	SOT223	1100	mW
P D	Power Dissipation	SOT89-5	800	mW
P D	Power Dissipation	SO-8EP	1190	mW
ESD HBM	Human Body Model ESD Protection	Human Body Model ESD Protection	> 2	KV
ESD MM	Machine Model ESD Protection (Note 5)	Machine Model ESD Protection (Note 5)	> 200	V

AP7361C-33 Recommended Operating Conditions

Symbol	Parameter	Min	Max	Unit
V IN	Input Voltage	2.2	6	V
V OUT	Output Voltage	0.8	5	V
I OUT	Output Current (Note 6)	0	1	A
T A	Operating Ambient Temperature	-40	85	C

AP7361C

NEW PRODUCT

ADVANCE INFORMATION

AP7361C

AP7361C-33 Thermal Information

Thermal protection disables the output when the junction temperature rises to approximately +150° C, allowing the device to cool down. When the junction temperature reduces to approximately +130° C the output circuitry is enabled again. Depending on power dissipation, thermal resistance, and ambient temperature, the thermal protection circuit may cycle on and off. This cycling limits the heat dissipation of the regulator, protecting it from damage due to overheating.

AP7361C-33 Typical Application

AP7361C-33 Package Information

Please see http://www.diodes.com/package-outlines.html for the latest version.

More part numbers on this datasheet

Their pages show this same datasheet. Some are linked through their part family rather than checked part by part, so confirm the exact part in the ordering information.

Other Linear Regulators (LDO)

LP5907MFX-3.3/NOPB – Texas Instruments, Low-Noise, Low-IQ LDO
AP7343D-30FS4-7B – Diodes Incorporated, 300mA High PSRR Low-Noise LDO
MC78M12ACDTRKG – onsemi, Positive Voltage Regulator
LM317 – Texas Instruments, Adjustable Regulator
ME6211C33M5G-N – Nanjing Micro One, High PSRR Low-Noise CMOS LDO Regulator
R1191L – Nisshinbo, LDO Regulator
AAT3221IGV-3.3-T1 – Skyworks Solutions, LDO Linear Regulator
AMS1117 – Advanced Monolithic Systems, Low Dropout Voltage Regulator

All Linear Regulators (LDO) datasheets All Diodes datasheets (217)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the AP7361C-33

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the AP7361C-33 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.