Skip to main content

AF-11G35

The AF-11G35 is an electronic component from Ubiquiti Networks, Inc.. View the full AF-11G35 datasheet below including pinout.

Manufacturer

Ubiquiti Networks, Inc.

Overview

Part: AF-11FX — Ubiquiti Networks

Type: Full-Duplex, Point-to-Point Radio

Description: Ubiquiti Networks AF-11FX is a full-duplex, point-to-point radio operating in the licensed 11 GHz band, designed for carrier-class network backhauls with up to 1.2+ Gbps throughput and 300+ km range.

Operating Conditions:

  • Supply voltage: 38-56VDC
  • Operating temperature: -40 to 55° C
  • Frequency range: 10.7-11.7 GHz
  • Max throughput: 1.2+ Gbps

Absolute Maximum Ratings:

  • Max supply voltage: 56VDC
  • Max junction/storage temperature: 55° C

Key Specs:

  • Frequency Range: 10.7-11.7 GHz
  • Max. Conducted TX Power: 30 dBm (Dependent on Regulatory Region)
  • Frequency Accuracy: ± 2.0ppm
  • Channel Bandwidth: 3.5/5/7/10/14/20/28/30/40/50/56 MHz Selectable
  • Max. Throughput: 1.2+ Gbps
  • Max. Range: 300+ km
  • Max. Power Consumption: 36W
  • Encryption: 128-bit AES

Features:

  • True Full-Duplex Design
  • Ultra-Low Latency
  • Enhanced Robustness (rain-fade mitigation)
  • Extended Range (unique RF power amplifier bias scheme)
  • Optimized Channels (SISO/MIMO, independent TX/RX frequency configuration)
  • Reconfigurable Duplexers (low-band/high-band, reversible)
  • Highest Performance Value (up to 1024QAM)
  • INVICTUS™ 2 custom silicon and proprietary radio architecture
  • PoE or DC power options
  • Versatile, Ruggedized N-Type Connectors
  • airOS® F operating system

Applications:

  • Outdoor PtP bridging
  • Carrier-class network backhauls

Package:

  • Dimensions: 327 x 112 x 86 mm
  • Weight: 2.260 kg

Pin Configuration

I appreciate your detailed request, but I must provide an important clarification:

The datasheet section provided is for the AF-11FX radio, not the AF-11G35.

The AF-11G35 is identified in the datasheet as an antenna, not a radio component with pins. Specifically, the datasheet states:

"Ubiquiti offers the AF-11G35 antenna, specially designed for the AF-11FX radio..."

And provides this specification table:

ModelFrequencyGainRadome
AF-11G3511 GHz35 dBiIntegrated

The AF-11G35 is a parabolic dish antenna with an integrated radome. It does not have an electronic pinout. The images show it mounted to the AF-11FX radio via an N-type connector, but there is no pin diagram or pin table for the antenna itself in this datasheet.

What I can extract:

  • The AF-11FX radio has RF connectors (SMA and N-type) and Ethernet ports, but no traditional IC pinout is provided in this datasheet section.

To proceed, I would need:

  1. Clarification: Did you mean to request the pinout for AF-11FX (the radio) instead?
  2. Or, if AF-11G35 is correct, a datasheet section that actually covers the antenna's internal electronics (if any).

Please confirm the correct part number and provide the relevant datasheet section with pin diagrams or pin tables.

Related Variants

The following components are covered by the same datasheet.

Part NumberManufacturerPackage
AF-11FXUbiquiti Networks, Inc.
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free