Battery Chargers Datasheets
100 Battery Chargers datasheets read into specs, pinouts and ratings. Parts from Texas Instruments, Analog Devices and Microchip Technology.
Battery Chargers datasheets, page 3
100 parts · page 3 of 4. Most used first, then by part number.
LTC4162-L
Analog Devices
Monolithic synchronous step-down switching battery charger and PowerPath manager for 6V/12V/18V/24V lead-acid batteries with up to 3.2A charge current and I2C telemetry.
LTC4162-S
Analog Devices
35V/3.2A monolithic synchronous step-down lead-acid battery charger with PowerPath manager, I2C telemetry, and absorb/equalize charging for 6V/12V/18V/24V batteries
LTC4162-SAD
Analog Devices
35V/3.2A monolithic synchronous step-down lead-acid battery charger and PowerPath manager with I2C telemetry and configurable charging parameters
LTC4162-SST
Analog Devices
35V/3.2A monolithic synchronous step-down switching lead-acid battery charger and PowerPath manager with I2C telemetry; non-programmable fixed-voltage (SST) variant.
LTC4162EUFD-SAD
Analog Devices
35V/3.2A synchronous step-down lead-acid battery charger with PowerPath manager and I2C telemetry; I2C adjustable-voltage version
LTC4162EUFD-SADM
Analog Devices
35V/3.2A synchronous step-down switching lead-acid battery charger and PowerPath manager with I2C telemetry, adjustable charge voltage, and input MPPT enabled (SADM variant)
LTC4162EUFD-SST
Analog Devices
35V/3.2A synchronous step-down lead-acid battery charger with PowerPath manager, I2C telemetry, and fixed-voltage charge settings (SST variant)
LTC4162EUFD-SSTM
Analog Devices
35V/3.2A synchronous step-down switching lead-acid battery charger with PowerPath manager, input MPPT, and I2C telemetry; fixed-voltage MPPT-on variant.
LTC4162IUFD-SAD
Analog Devices
35V/3.2A synchronous step-down lead-acid battery charger with PowerPath manager, input MPPT support, and I2C telemetry (I2C adjustable voltage version).
LTC4162IUFD-SADM
Analog Devices
35V/3.2A synchronous step-down lead-acid battery charger and PowerPath manager with I2C telemetry, input MPPT for solar panels, and I2C-adjustable charge voltage
LTC4162IUFD-SST
Analog Devices
35V/3.2A synchronous step-down switching lead-acid battery charger with PowerPath manager, I2C telemetry, and fixed-voltage configuration (SST variant, no MPPT)
LTC4162IUFD-SSTM
Analog Devices
35V/3.2A synchronous step-down lead-acid battery charger with PowerPath manager, I2C telemetry and input MPPT (fixed-voltage version, MPPT enabled)
MAX17055
Analog Devices
Ultra-low 7μA operating current I2C fuel gauge implementing the ModelGauge m5 EZ algorithm, providing accurate state of charge and remaining capacity for lithium batteries without battery characterization.
MAX17055ETB
Analog Devices
Low 7μA operating current ModelGauge m5 EZ fuel gauge with I2C interface, providing accurate SOC and remaining capacity without battery characterization
MAX17055ETB+T
Analog Devices
Battery Management 7 A 1-Cell Fuel Gauge with ModelGauge m5 EZ
MAX17055EWL
Analog Devices
Low 7μA operating current I2C fuel gauge implementing ModelGauge m5 EZ algorithm, providing accurate state of charge and remaining capacity for single-cell Li+ batteries without battery characterization.
MCP73831-2AC/IOT
Microchip Technology
Miniature single-cell, fully integrated linear Li-Ion/Li-Polymer charge management controller with integrated pass transistor, current sense, reverse discharge protection and programmable charge current up to 500 mA.
MCP73831T-2ACI/MC
Microchip Technology
IC BATT CONTRL LI-ION 1CELL 8DFN
MCP73831T-2ACI/OT
Microchip Technology
IC BATT CNTL LI-ION 1CEL SOT23-5
MCP73831T-2ATI/OT
Microchip Technology
IC BATT CNTL LI-ION 1CEL SOT23-5
MCP73831T-2DCI/OT
Microchip Technology
IC BATT CNTL LI-ION 1CEL SOT23-5
MCP73831T-4ADI/OT
Microchip Technology
IC BATT CNTL LI-ION 1CEL SOT23-5
MCP73831T-5ACI/OT
Microchip Technology
IC BATT CNTL LI-ION 1CEL SOT23-5
MCP73832
Microchip Technology
Miniature single-cell, fully integrated linear charge management controller for Li-Ion/Li-Polymer batteries with integrated pass transistor, current sense, thermal regulation and charge status output.
MP2639B
Monolithic Power Systems
Highly integrated switch-mode battery charger for single-cell Li-ion/Li-polymer batteries with wide 4.5V-16V input range, up to 5A charge current, and integrated programmable boost (OTG) discharge mode up to 16V/3A
MP2639BGR
Monolithic Power Systems
Integrated switch-mode battery charging management device with programmable OTG boost for single-cell Li-ion/Li-Polymer batteries.
NPM1300
Nordic Semiconductor
Highly integrated PMIC with an 800 mA linear Li-ion/Li-poly/LiFePO4 battery charger, two 200 mA buck regulators, two 50 mA LDO/100 mA load switches, fuel gauge support and system management features, designed for nRF52/53/54/91 based low-po
nPM1300-CAAA-R
Nordic Semiconductor
Battery Management PMIC with battery charger 32-800mA, fuel gauge, 2x Buck, 2x LDO/LS, 4x GPIO, 3x LED drivers, TWI & system features
RT9471
Richtek
3A highly-integrated synchronous switch-mode battery charger with system power path management and I2C control for single-cell Li-Ion/Li-polymer batteries, with USB OTG support.
RT9471/D
Richtek
Highly-integrated 3A switch-mode battery charger and system power path manager for single-cell Li-Ion/Li-polymer with I2C interface; RT9471D variant adds D+/D- USB BC1.2 detection.