nPM1300-CAAA-R

Part: nPM1300 — Nordic Semiconductor

Type: Power Management IC (PMIC)

Description: Integrated PMIC featuring an 800 mA linear battery charger, dual 200 mA buck regulators, dual 50 mA LDO/100 mA load switches, and fuel gauge monitoring with 4.0–5.5 V input operation (22 V tolerant).

Operating Conditions:

• Supply voltage: 4.0 to 5.5 V (VBUS)
• Battery voltage: 2.3 to 4.45 V (VBAT)
• I/O supply voltage: 1.7 V to VSYS (VDDIO)
• Operating temperature: -40 to +85 °C (ambient), -40 to +125 °C (junction)

Absolute Maximum Ratings:

• Max supply voltage: 22 V (VBUS), 5.5 V (VBAT, VSYS, PVDD, VDDIO)
• Max junction/storage temperature: -40 to +125 °C (storage)

Key Specs:

• Maximum linear charge current: 800 mA (configurable from 32 mA to 800 mA)
• Charge termination voltage range: 3.5 V to 4.45 V
• Dual buck regulator output current: 200 mA each
• Dual LDO / load switch capacity: 50 mA LDO mode / 100 mA load switch mode each
• Unregulated power rail current: up to 1340 mA (battery powered) / up to 1.5 A (USB DCP)
• LED driver output current: 5 mA per channel (3 low-side drivers)
• ADC resolution: 10-bit (system monitor for VBUS, battery voltage, current, die temperature)

Features:

• Linear battery charger supporting Li-ion, Li-poly, and LiFePO4 chemistries
• Dynamic power-path management and input current limiter
• Dual buck regulators with automatic transition between Hysteretic and PWM modes
• Ultra-low-power fuel gauge algorithm support with battery voltage, current, and temperature monitoring
• System management watchdog, boot monitor, wake-up timer, and power-fail warning comparator
• Ship and Hibernate low-power modes for extended battery life
• I2C-compatible two-wire interface (TWI) for host configuration and telemetry
• Up to 5 general-purpose I/O (GPIO) pins

Applications:

• Wearables
• Health/fitness sensor and monitoring devices
• Computer peripherals and I/O devices (mouse, keyboard, multi-touch trackpad)
• Asset trackers
• Interactive entertainment devices, remote controls, and gaming controllers
• Low-power IoT sensors, loggers, and actuator controls

Package:

• QFN32 (5.0 × 5.0 mm)
• WLCSP (3.1 × 2.4 mm)

• 800 mA linear battery charger
• Linear charger for lithium-ion, lithium-polymer, and lithium iron phosphate batteries
• Configurable charge current from 32 mA to 800 mA
• Charging termination voltage from 3.5 V to 4.45 V
• Configurable thermal regulation
• JEITA compliant
• Dynamic power-path management
• Input current limiter
• USB Type-C compliant
• 4.0 V to 5.5 V operational input voltage range
• 22 V tolerant
• Two 200 mA buck regulators
• Automatic transition between Hysteretic and pulse width modulation (PWM) modes
• Forced PWM mode for low-ripple operation
• Pin-selectable output voltage
• Ultra-low power, high accuracy fuel gauge tailored for embedded IoT applications
• Battery voltage, current and temperature monitored by nPM1300
• Nordic Fuel Gauge algorithm running on host System-on-Chip/MCU

• Wearables
• Health/fitness sensor and monitoring devices
• Computer peripherals and I/O devices
• Mouse
• Keyboard
• Multi-touch trackpad
• Asset trackers
• Two 50 mA LDO/100 mA load switches
• I 2 C compatible TWI for control and monitoring
• 10-bit ADC for system monitoring
• Measures VBUS voltage, battery voltage, current, and die temperature
• Three pre-configured and programmable 5 mA low-side LED drivers
• Configurable timer
• Boot monitor
• Watchdog timer with selectable reset or power cycling
• Wake-up timer
• General purpose timer
• Power-fail warning (POF)
• Configurable hard reset
• General purpose GPIOs that can control BUCKs, load switches, interrupt output, reset, power fail warning, or as a general purpose I/O
• Seamless integration and code free configuration with the nPM1300 Evaluation Kit and nPM PowerUp desktop app
• Package options available:
• 3.1x2.4 mm WLCSP package
• 5.0x5.0 mm QFN package
• Interactive entertainment devices
• Remote controls
• Gaming controllers
• IoT applications
• Smart/low-energy sensors
• Loggers
• Actuator controls

The GPIO peripheral implements up to 5 pins, GPIO[0...4] . Each of these pins can be individually configured in the GPIOMODE[n] registers.

The following graphs show quiescent current characteristics.

Figure 4: SHIP mode current vs. junction temperature

Figure 4: SHIP mode current vs. junction temperature

Figure 5: Discharge mode current vs. junction temperature

Maximum ratings are the extreme limits to which the device can be exposed for a limited amount of time without permanently damaging it. Exposure to absolute maximum ratings for prolonged periods of time may affect the reliability of the device.

Table 5: Absolute maximum ratings

Table 6: Environmental ratings

The operating conditions are the physical parameters that the chip can operate within.

Table 7: Recommended operating conditions

Note: Any system features powered by VSYS will only operate when the VSYS voltage > VSYSPOF.

A global thermal shutdown is triggered when the die temperature exceeds the operating temperature range, see TSD. All device functions are disabled in thermal shutdown. The device functions are re-enabled when the temperature is sufficiently reduced according to a hysteresis TSDHYST. The die temperature limit is only monitored when charging is enabled or when a BUCK is enabled and is in PWM mode.

A secondary mechanism disables the charger when the die reaches the host software programmable temperature of DIETEMPSTOP on page 43 . Once this temperature is reached, charging stops but all other functionality remains active. Charging restarts when the die temperature reaches the host software programmable temperature of DIETEMPRESUME on page 44.