WRB0505(M)P-3W

Part: WRA_(M)P-3W & WRB_(M)P-3W Series — MORNSUN Science & Technology Co.,Ltd.

Type: Isolated DC-DC Converter

Description: 3 W regulated isolated single/dual output DC-DC converter featuring a 2:1 wide input range, 1500 VDC isolation, and efficiencies up to 81%.

Operating Conditions:

• Operating temperature: -40 to 85 °C

Key Specs:

• Output power: 0.3 W (min) to 3 W (max)
• Isolation voltage: 1500 VDC (tested for 1 minute, 1 mA max)
• Isolation resistance: 1000 MΩ (tested at 500 VDC)
• Isolation capacitance: 85 pF typ. (Input/Output, 100 kHz / 1 V)
• Line regulation: ±0.2% typ., ±0.5% max (input voltage from low to high)
• Load regulation (WRB series): ±0.5% typ., ±0.75% max (10% to 100% load)
• Output ripple & noise: 50 mVp-p typ., 100 mVp-p max (20 MHz bandwidth)
• Switching frequency: 300 kHz typ. (100% load, input voltage range)

Features:

• 2:1 wide input voltage range
• Continuous short-circuit protection with automatic recovery
• Internal SMD construction
• No heat sink required
• MTBF > 1,000,000 hours
• Plastic (UL94-V0) or stainless steel metal package options

Applications:

• Distributed power supply systems on circuit boards
• Applications requiring 2:1 input voltage range
• Isolated power applications requiring up to 1500 VDC isolation
• Systems demanding regulated output voltage and low output ripple/noise

Package:

• DIP (plastic or stainless steel metal case)

• 2:1 wide input voltage range
• DIP package
• Efficiency up to 81%
• 1500VDC isolation
• Short circuit protection (automatic recovery)
• Operating temperature: -40 ° C to +85 ° C
• Internal SMD construction
• No heat sink required
• MTBF>1,000,000 hours
• RoHS Compliance

The WRA_(M)P-3W & WRB_(M)P-3W Series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board.

These products apply to:

• 1. Where the voltage of the input power supply is wide range (voltage range ≤ 2:1);
• 1. Where isolation is necessary between input and output (isolation ≤ 1500VDC);
• 1. Where the regulation of the output voltage and the output ripple noise are demanded.