W25Q128JVSIQ

Part: W25Q128JV

Type: Serial Flash Memory

Key Specs:

• Voltage: 3V
• Capacity: 128 M-bit
• Grade: Industrial & Industrial Plus

Features:

• Dual/Quad SPI interface
• Standard SPI Instructions
• Software Reset & Hardware /RESET pin
• Write Protection (Block Protect Bits, Top/Bottom Block Protect, Sector/Block Protect Bit, Complement Protect, Status Register Protect, Security Register Lock Bits, Quad Enable, Write Protect Selection, Output Driver Strength)
• Erase/Program Suspend Status
• Manufacturer and Device Identification
• Read/Write Status Registers
• Read Data, Fast Read, Fast Read Dual Output, Fast Read Quad Output, Fast Read Dual I/O, Fast Read Quad I/O
• Set Burst with Wrap
• Quad Input Page Program
• Sector Erase, 32KB Block Erase

Applications:

• null

Package:

• SOIC 208-mil
• WSON 6x5-mm
• WSON 8x6-mm
• SOIC 300-mil
• TFBGA 8x6-mm (5x5 or 6x4 Ball Array)
• WLCSP

• Software and Hardware Write-Protect
• Power Supply Lock-Down
• Special OTP protection
• Top/Bottom, Complement array protection
• Individual Block/Sector array protection
• 64-Bit Unique ID for each device
• Discoverable Parameters (SFDP) Register
• 3X256-Bytes Security Registers with OTP locks
• Volatile & Non-volatile Status Register Bits

Figure 1a. W25Q128JV Pin Assignments, 8-pin SOIC 208-mil (Package Code S)

| | | | | SPEC | |---------------------------------------------|---------|------------------------------------|-----------|------|-----------|------| | PARAMETER | SYMBOL | CONDITIONS | MIN | TYP | MAX | UNIT | | Input Capacitance | CIN(1) | VIN = 0V(1) | | | 6 | pF | | Output Capacitance | Cout(1) | VOUT = 0V(1) | | | 8 | pF | | Input Leakage | ILI | | | | ±2 | µA | | I/O Leakage | ILO | | | | ±2 | µA | | Standby Current | ICC1 | /CS = VCC,
VIN = GND or VCC | | 10 | 60 | µA | | Power-down Current | ICC2 | /CS = VCC,
VIN = GND or VCC | | 1 | 20 | µA | | Current Read Data /
Dual /Quad 50MHz(2) | ICC3 | C = 0.1 VCC / 0.9 VCC
DO = Open | | 8 | 15 | mA | | Current Read Data /
Dual /Quad 80MHz(2) | ICC3 | C = 0.1 VCC / 0.9 VCC
DO = Open | | 10 | 18 | mA | | Current Read Data /
Dual /Quad 104MHz(2) | ICC3 | C = 0.1 VCC / 0.9 VCC
DO = Open | | 12 | 20 | mA | | Current Write Status
Register | ICC4 | /CS = VCC | | 20 | 25 | mA | | Current Page Program | ICC5 | /CS = VCC | | 20 | 25 | mA | | Current Sector/Block
Erase | ICC6 | /CS = VCC | | 20 | 25 | mA | | Current Chip Erase | ICC7 | /CS = VCC | | 20 | 25 | mA | | Input Low Voltage | VIL | | –0.5 | | VCC x 0.3 | V | | Input High Voltage | VIH | | VCC x 0.7 | | VCC + 0.4 | V | | Output Low Voltage | VOL | IOL = 100 µA | | | 0.2 | V | | Output High Voltage | VOH | IOH = –100 µA | VCC – 0.2 | | | V |

• 1. Tested on sample basis and specified through design and characterization data. TA = 25° C, VCC = 3.0V.
• 1. Checker Board Pattern.