W25Q128JVBJM

Part: W25Q128JV

Type: Serial Flash Memory

Description: 128M-bit (16M-byte) serial flash memory with Standard, Dual, and Quad SPI interfaces, supporting up to 133MHz clock frequency and operating from a 2.7V to 3.6V supply.

Operating Conditions:

• Supply voltage: 2.7V to 3.6V
• Operating temperature: -40°C to +85°C (Industrial Grade), -40°C to +105°C (Industrial Plus Grade)
• Max SPI clock frequency: 133MHz (Single, Dual/Quad SPI)
• Equivalent Dual/Quad SPI clock: 266MHz (Dual I/O), 532MHz (Quad I/O)

Absolute Maximum Ratings:

• Max supply voltage: 4.0V
• Max input/output voltage: VCC+0.4V (max 4.0V)
• Max storage temperature: +150°C

Key Specs:

• Capacity: 128M-bit / 16M-byte
• Page size: 256-bytes
• Sector erase size: 4KB
• Program-Erase cycles: Min. 100K per sector
• Data retention: More than 20-year
• Power-down current: <1μA (typ.)
• Continuous data transfer rate: 66MB/S

Features:

• New Family of SpiFlash Memories
• Flexible Architecture with 4KB sectors
• Standard, Dual, Quad SPI interfaces
• Software & Hardware Reset
• Highest Performance Serial Flash (133MHz clock, 266/532MHz equivalent Dual/Quad SPI)
• Efficient 'Continuous Read' with 8/16/32/64-Byte Wrap
• Low Power (<1μA Power-down)
• Uniform Sector/Block Erase (4K/32K/64K-Byte)
• Erase/Program Suspend & Resume
• Advanced Security Features (Write-Protect, OTP, Unique ID, Security Registers)

Applications:

• Code shadowing to RAM
• Executing code directly from Dual/Quad SPI (XIP)
• Storing voice, text and data

Package:

• 8-Pin SOIC 208-mil (Package Code S)
• 8-Pad WSON 6x5-mm (Package Code P)
• 8-Pad WSON 8x6-mm (Package Code E)
• 24-Ball TFBGA 8x6-mm (5x5-1 ball array, Package Code B)
• 24-Ball TFBGA 8x6-mm (6x4 ball array, Package Code C)
• 24-Ball WLCSP (Package Code Y)

• New Family of SpiFlash Memories Flexible Architecture with 4KB sectors
• W25Q128JV: 128M-bit / 16M-byte
• Standard SPI: CLK, /CS, DI, DO
• Dual SPI: CLK, /CS, IO0, IO1
• Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
• Software & Hardware Reset (1)
• Highest Performance Serial Flash
• 133MHz Single, Dual/Quad SPI clocks
• 266/532MHz equivalent Dual/Quad SPI
• 66MB/S continuous data transfer rate
• Min. 100K Program-Erase cycles per sector
• More than 20-year data retention
• Efficient 'Continuous Read'
• Continuous Read with 8/16/32/64-Byte Wrap
• As few as 8 clocks to address memory
• Allows true XIP (execute in place) operation
• Low Power, Wide Temperature Range
• Single 2.7 to 3.6V supply
• <1μA Power-down (typ.)
• -40°C to +85°C operating range
• -40°C to +105°C operating range
• Uniform Sector/Block Erase (4K/32K/64K-Byte)
• Program 1 to 256 byte per programmable page
• Erase/Program Suspend & Resume
• Advanced Security Features
• Software and Hardware Write-Protect
• Power Supply Lock-Down
• Special OTP protection
• Top/Bottom, Complement array protection
• Individual Block/Sector array protection
• 64-Bit Unique ID for each device
• Discoverable Parameters (SFDP) Register
• 3X256-Bytes Security Registers with OTP locks
• Volatile & Non-volatile Status Register Bits
• Space Efficient Packaging
• 8-pin SOIC 208-mil
• 16-pin SOIC 300-mil (additional /RESET pin)
• 8-pad WSON 6x5-mm / 8x6-mm
• 24-ball TFBGA 8x6-mm (6x4/5x5 ball array)
• 24-ball WLCSP
• Contact Winbond for KGD and other options

Note: 1. Hardware /RESET pin is only available on TFBGA or SOIC16 packages

• 4 - Revision F

Figure 1a. W25Q128JV Pin Assignments, 8-pin SOIC 208-mil (Package Code S)

Figure 1a. W25Q128JV Pin Assignments, 8-pin SOIC 208-mil (Package Code S)

1. Tested on sample basis and specified through design and characterization data. TA = 25° C, VCC = 3.0V.
2. Checker Board Pattern.

• 62 - Revision F

1. This device has been designed and tested for the specified operation ranges. Proper operation outside of these levels is not guaranteed. Exposure to absolute maximum ratings may affect device reliability. Exposure beyond absolute maximum ratings may cause permanent damage.
2. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly and the European directive on restrictions on hazardous substances (RoHS) 2002/95/EU.
3. JEDEC Std JESD22-A114A (C1=100pF, R1=1500 ohms, R2=500 ohms).