TPS7A4001DGNT
Ultra-High Voltage Linear RegulatorThe TPS7A4001DGNT is a ultra-high voltage linear regulator from Texas Instruments. View the full TPS7A4001DGNT datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
Ultra-High Voltage Linear Regulator
Key Specifications
| Parameter | Value |
|---|---|
| Packaging | MouseReel |
| Packaging | MouseReel |
| Packaging | MouseReel |
| Packaging | MouseReel |
| Packaging | MouseReel |
| Standard Pack Qty | 250 |
| Standard Pack Qty | 250 |
| Standard Pack Qty | 250 |
| Standard Pack Qty | 250 |
| Standard Pack Qty | 250 |
Overview
Part: TPS7A4001 — Texas Instruments
Type: Ultra-High Voltage Linear Regulator
Description: A 7–100 V input, 50 mA ultra-high voltage linear regulator with 1% nominal accuracy, low 25 μA quiescent current, and integrated thermal and current limit protection, offered in a high thermal performance HVSSOP package.
Operating Conditions:
- Supply voltage: 7–100 V
- Operating temperature: -40 to 125 °C
- Output voltage range: 1.161–90 V
- Output current: 0–50 mA
Absolute Maximum Ratings:
- Max junction/storage temperature: 125 °C (Operating virtual junction), 150 °C (Storage)
Key Specs:
- Input voltage range: 7–100 V
- Output voltage range: 1.175–90 V (adjustable)
- Nominal output accuracy: ±1% (Tj = 25°C, Vin = 9V, Iout = 25mA)
- Overall output accuracy: ±2.5% (Vin = Vout(nom)+2V to 24V, Iout = 100μA to 50mA)
- Quiescent current (I_GND): 25 μA (Iout = 0 mA)
- Shutdown supply current (I_SHDN): 4.1 μA (Typ)
- Dropout voltage (V_DO): 290 mV (Typ, Vin = 17V, Vout(nom) = 18V, Iout = 20mA)
- Current limit (I_LIM): 51 mA (Min, Vout = 90% Vout(nom), Vin = 7V, Tj ≤ 85°C)
- Thermal shutdown temperature (T_SD): 170 °C (Shutdown, increasing)
Features:
- Ultra-high input voltage: 100V (max)
- Low quiescent current: 25μA
- CMOS logic level compatible enable pin
- Stable with ceramic capacitors (≥ 1μF input, ≥ 4.7μF output)
- Built-in current limit and thermal shutdown protection
- High thermal performance HVSSOP PowerPAD™ package
Applications:
- Microprocessors, microcontrollers powered by industrial buses
- Industrial automation
- Telecom infrastructure
- Automotive
- Power over Ethernet (PoE)
- LED lighting
- Bias supplies
Package:
- HVSSOP (8) (3.00mm x 5.00mm)
Pin Configuration
| PIN | PIN | I/O | DESCRIPTION |
|---|---|---|---|
| NAME | NO. | I/O | DESCRIPTION |
| OUT | 1 | O | Regulator output. A capacitor > 4.7 μF must be tied from this pin to ground to assure stability. |
| FB | 2 | O | This pin is the input to the control-loop error amplifier. It is used to set the output voltage of the device. |
| NC | 3 | - | Not internally connected. This pin must either be left open or tied to GND. |
| NC | 6 | - | Not internally connected. This pin must either be left open or tied to GND. |
| NC | 7 | - | Not internally connected. This pin must either be left open or tied to GND. |
| GND | 4 | - | Ground |
| EN | 5 | I | This pin turns the regulator on or off. If V EN ≥ V EN_HI the regulator is enabled. If V EN ≤ V EN_LO , the regulator is disabled. If not used, the EN pin can be connected to IN. Make sure that V EN ≤ V IN at all times. |
| IN | 8 | I | Input supply |
| PowerPAD | - | - | Solder to printed-circuit-board (PCB) to enhance thermal performance. NOTE: The PowerPAD is internally connected to GND. Although it can be left floating, TI highly recommends connecting the PowerPAD to the GND plane. |
Electrical Characteristics
At TJ = -40°C to 125°C, VIN = VOUT(NOM) + 2 V or VIN = 7 V (whichever is greater), V EN = VIN, I OUT = 100 μA, CIN = 1 μ F, COUT = 4.7 μ F, and FB tied to OUT, unless otherwise noted.
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| V IN Input voltage | V IN Input voltage | V IN Input voltage | 7 | 7 | 100 | V |
| V REF | Internal reference | T J = 25°C, V FB = V REF , V IN = 9 V, I OUT = 25 mA | 1.161 | 1.173 | 1.185 | V |
| V OUT | Output voltage range (1) | V IN ≥ V OUT(NOM) + 2 V | V REF | 90 | V | |
| V OUT | Nominal accuracy | T J = 25°C, V IN = 9 V, I OUT = 25 mA | -1 | 1 | %V OUT | |
| V OUT | Overall accuracy | V OUT(NOM) + 2 V ≤ V IN ≤ 24 V (2) 100 μA ≤ I OUT ≤ 50 mA | -2.5 | 2.5 | %V OUT | |
| /c68 %V OUT /c68 V IN | Line regulation | 7 V ≤ V IN ≤ 100 V | 0.03 | 0.03 | %V OUT | |
| /c68 %V OUT /c68 I OUT | Load regulation | 100 μA ≤ I OUT ≤ 50 mA | 0.31 | 0.31 | %V OUT | |
| V DO | Dropout voltage | V IN = 17 V, V OUT(NOM) = 18 V, I OUT = 20 mA V IN = 17 V, V OUT(NOM) = 18 V, I OUT = 50mA | 290 | 0.78 | 1.3 | mV V |
| I LIM | Current limit | V OUT = 90% V OUT(NOM) , V IN = 7 V, T J ≤ 85°C | 51 | 117 | 200 | mA |
| I LIM | Current limit | V OUT = 90% V OUT(NOM) , V IN = 9 V | 51 | 128 | 200 | mA |
| I GND | Ground current | 7 V ≤ V IN ≤ 100 V, I OUT = 0 mA | 25 | 65 | μ A | |
| I GND | Ground current | I OUT = 50 mA | 25 | 25 | μ A | |
| I SHDN | Shutdown supply current | V EN = 0.4 V | 4.1 | 20 | μ A | |
| I FB | Feedback current (3) | -0.1 | 0.01 | 0.1 | μA | |
| I EN | Enable current | 7 V ≤ V IN ≤ 100 V, V IN = V EN | 0.02 | 1 | μ A | |
| V EN_HI | Enable high-level voltage | 1.5 | V IN | V | ||
| V EN_LO | Enable low- level voltage | 0 | 0.4 | V | ||
| V NOISE | Output noise voltage | V IN = 12 V, V OUT(NOM) = V REF , C OUT = 10 μ F, BW = 10 Hz to 100 kHz | 58 | 58 | μ V RMS | |
| V NOISE | Output noise voltage | V IN = 12 V, V OUT(NOM) = 5 V, C OUT = 10 μ F, C BYP (4) = 10 nF, BW = 10 Hz to 100 kHz | 73 | 73 | μ V RMS | |
| PSRR | Power-supply rejection ratio | V IN = 12 V, V OUT(NOM) = 5 V, C OUT = 10 μ F, C BYP (4) = 10 nF, ƒ = 100 Hz | 65 | 65 | dB | |
| T SD | Thermal shutdown temperature | Shutdown, temperature increasing Reset, temperature decreasing | 170 | 170 150 | °C °C | |
| T J | Operating junction temperature | -40 | 125 | °C |
Absolute Maximum Ratings
over operating junction temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Voltage | IN pin to GND pin | -0.3 | 105 | V |
| Voltage | OUT pin to GND pin | -0.3 | 105 | V |
| Voltage | OUT pin to IN pin | -105 | 0.3 | V |
| Voltage | FB pin to GND pin | -0.3 | 2 | V |
| Voltage | FB pin to IN pin | -105 | 0.3 | V |
| Voltage | EN pin to IN pin | -105 | 0.3 | V |
| Voltage | EN pin to GND pin | -0.3 | 105 | V |
| Current | Peak output | Internally limited | Internally limited | |
| Temperature | Operating virtual junction, T J | -40 | 125 | °C |
| Temperature | Storage, T stg | -65 | 150 | °C |
Recommended Operating Conditions
over operating junction temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | |
|---|---|---|---|---|
| VIN | 7 | 100 | V | |
| VOUT | 1.161 | 90 | V | |
| VEN | 0 | 100 | V | |
| IOUT | 0 | 50 | mA |
Thermal Information
| THERMAL METRIC (1) | TPS7A4001 DGN (HVVSOP) 8 PINS | UNIT | |
|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 66.7 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 54.1 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 38.1 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 2 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 37.8 | °C/W |
| R θ JC(bot) | Junction-to-case (bottom) thermal resistance | 15.5 | °C/W |
Typical Application
One of the primary applications of the TPS7A4001 device is to provide transient voltage protection to sensitive circuitry that may be damaged in the presence of high-voltage spikes.
This transient voltage protection can be more cost-effective and compact compared to topologies that use a transient voltage suppression (TVS) block.
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPS7A4001 | Texas Instruments | — |
| TPS7A4001DGNR | Texas Instruments | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad |
Get structured datasheet data via API
Get started free