TPS62130A
Synchronous Buck ConverterThe TPS62130A is a synchronous buck converter from Texas Instruments. View the full TPS62130A datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
Synchronous Buck Converter
Key Specifications
| Parameter | Value |
|---|---|
| Output Current | 4A |
| Switching Frequency | 1MHz |
| Function | Step-Down |
| Height | 1 mm |
| Length | 3 mm |
| Lifecycle Status | Production (Last Updated: 4 days ago) |
| Manufacturer Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Max Operating Temperature | 125 °C |
| Min Operating Temperature | -40 °C |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Number of Pins | 11 |
| Operating Temperature | -40°C ~ 125°C (TJ) |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 11-VFQFN |
| Packaging | MouseReel |
| RoHS | Compliant |
| Schedule B | 8542390000 |
| Standard Pack Qty | 3000 |
| Supplier Device Package | 11-VQFN-HR (2x3) |
| Synchronous Rectifier | Yes |
| Thickness | 900 µm |
| Topology | Buck |
| Topology | Buck |
| Input Voltage (Max) | 17V |
| Input Voltage (Min) | 3V |
| Output Voltage (Max) | 12V |
| Output Voltage | 0.8V |
| Width | 2 mm |
Overview
Part: TPS6213x — Texas Instruments
Type: Synchronous Step-Down DC-DC Converter
Description: The TPS6213x family are easy-to-use synchronous step-down DC-DC converters optimized for applications with high power density, featuring a 3 V to 17 V input voltage range, up to 3 A output current, and adjustable output voltage from 0.9 V to 6 V.
Operating Conditions:
- Supply voltage: 3–17 V
- Operating temperature: -40 to 125 °C
Absolute Maximum Ratings:
- Max supply voltage: 20 V
- Max Power Good sink current: 10 mA
- Max junction temperature: 150 °C
- Max storage temperature: 150 °C
Key Specs:
- Input voltage range: 3–17 V
- Operating quiescent current: 17 μA (typ) at I_OUT = 0 mA, device not switching
- Shutdown current: 1.5 μA (typ) at EN=Low, T_A = -40°C to +85°C
- High-side MOSFET ON-resistance: 90 mΩ (typ) at V_IN ≥ 6V
- Low-side MOSFET ON-resistance: 40 mΩ (typ) at V_IN ≥ 6V
- High-side MOSFET forward current limit: 4.2 A (typ) at V_IN = 12V, T_A = 25°C
- Output voltage range (TPS62130): 0.9–6.0 V
- Initial output voltage accuracy: 800 mV (typ) in PWM mode operation, V_IN ≥ V_OUT +1V
Features:
- DCS-Control™ topology
- Up to 3-A output current
- Adjustable output voltage from 0.9 V to 6 V
- Pin-selectable output voltage (nominal, + 5%)
- Programmable soft start and tracking
- Seamless power save mode transition
- Quiescent current of 17 μA (typical)
- Selectable operating frequency
- Power-good output
- 100% duty cycle mode
- Short circuit protection
- Overtemperature protection
- Pin-to-pin compatible with the TPS62140 and TPS62150
Applications:
- Standard 12-V rail supplies
- POL supply from single or multiple Li-ion battery
- Solid-state drives
- Embedded systems
- LDO replacement
- Mobile PCs, tablets, modems, cameras
- Server, microserver
- Data terminal, point of sales (ePOS)
Package:
- VQFN (16) - 3 mm × 3 mm
Features
- DCS-Control ™ topology
- Input voltage range: 3 V to 17 V
- Up to 3-A output current
- Adjustable output voltage from 0.9 V to 6 V
- Pin-selectable output voltage (nominal, + 5%)
- Programmable soft start and tracking
- Seamless power save mode transition
- Quiescent current of 17 μA (typical)
- Selectable operating frequency
- Power-good output
- 100% duty cycle mode
- Short circuit protection
- Overtemperature protection
- Pin-to-pin compatible with the TPS62140 and TPS62150
- Available in a 3-mm × 3-mm, QFN-16 package
- Use the TPS82130 for faster designs
Applications
- Standard 12-V rail supplies
- POL supply from single or multiple Li-ion battery
- Solid-state drives
- Embedded systems
- LDO replacement
- Mobile PCs, tablets, modems, cameras
- Server, microserver
- Data terminal, point of sales (ePOS)
Typical Application Schematic
Typical Application Schematic
Pin Configuration
Figure 6-1. 16-Pin VQFN With Exposed Thermal Pad (RGT) Top View
Table 6-1. Pin Functions
| PIN (1) | PIN (1) | I/O | DESCRIPTION |
|---|---|---|---|
| NO. | NAME | I/O | DESCRIPTION |
| 1,2,3 | SW | O | Switch node, which is connected to the internal MOSFET switches. Connect an inductor between SW and the output capacitor. |
| 4 | PG | O | Output power good (High = V OUT ready, Low = V OUT below nominal regulation); open drain (requires pullup resistor) |
| 5 | FB | I | Voltage feedback of adjustable version. Connect a resistive voltage divider to this pin. It is recommended to connect FB to AGND on fixed output voltage versions for improved thermal performance. |
| 6 | AGND | Analog Ground. Must be connected directly to the Exposed Thermal Pad and common ground plane. | |
| 7 | FSW | I | Switching Frequency Select (Low ≈ 2.5 MHz, High ≈ 1.25 MHz (2) for typical operation) (3) |
| 8 | DEF | I | Output voltage scaling (Low = nominal, High = nominal + 5%) (3) |
| 9 | SS/TR | I | Soft-Start/Tracking Pin. An external capacitor connected to this pin sets the internal voltage reference rise time. It can be used for tracking and sequencing. |
| 10 | AVIN | I | Supply voltage for control circuitry. Connect to the same source as PVIN. |
| 11,12 | PVIN | I | Supply voltage for power stage. Connect to the same source as AVIN. |
| 13 | EN | I | Enable input (High = enabled, Low = disabled) (3) |
| 14 | VOS | I | Output voltage sense pin and connection for the control loop circuitry |
| 15,16 | PGND | Power Ground. Must be connected directly to the Exposed Thermal Pad and common ground plane. | |
| Exposed Thermal Pad | Must be connected to AGND (pin 6), PGND (pin 15,16), and common ground plane. See the Layout Example . Must be soldered to achieve appropriate power dissipation and mechanical reliability. |
- (1) For more information about connecting pins, see the Detailed Description and Application and Implementation sections.
- (2) Connect FSW to VOUT or PG in this case.
- (3) An internal pulldown resistor keeps logic level low if pin is floating.
Electrical Characteristics
over operating junction temperature (TJ = -40°C to 125°C), typical values at V IN = 12 V and T A=25°C (unless otherwise noted)
| PARAMETER | PARAMETER | TEST CONDITIONS | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY | SUPPLY |
| V IN | Input voltage range (1) | 3 | 17 | V | |||
| I Q | Operating quiescent current | EN=High, I OUT = 0 mA, device not switching | 17 17 | 30 25 | μA | ||
| I | (2) | T A = -40°C to +85°C | 1.5 | 25 | |||
| SD | Shutdown current | EN=Low | T A = -40°C to +85°C | 1.5 | 4 | μA | |
| V UVLO | Undervoltage lockout threshold | Falling Input Voltage (PWM mode operation) | Falling Input Voltage (PWM mode operation) | 2.6 | 2.7 | 2.8 | V |
| T SD | Thermal shutdown temperature | Hysteresis | 200 160 | mV | |||
| T SD | Thermal shutdown hysteresis | 20 | °C | ||||
| CONTROL (EN, DEF, FSW, SS/TR, PG) | CONTROL (EN, DEF, FSW, SS/TR, PG) | CONTROL (EN, DEF, FSW, SS/TR, PG) | CONTROL (EN, DEF, FSW, SS/TR, PG) | CONTROL (EN, DEF, FSW, SS/TR, PG) | CONTROL (EN, DEF, FSW, SS/TR, PG) | CONTROL (EN, DEF, FSW, SS/TR, PG) | CONTROL (EN, DEF, FSW, SS/TR, PG) |
| V H | High level input threshold voltage (EN, DEF, FSW) | 0.9 | 0.65 | V | |||
| V L | Low level input threshold voltage (EN, DEF, FSW) | 0.45 | 0.3 | V | |||
| I LKG | Input leakage current (EN, DEF, FSW) | EN=V IN or GND; DEF, FSW=V OUT or GND | EN=V IN or GND; DEF, FSW=V OUT or GND | 0.01 | 1 | μA | |
| V TH_PG | Power good threshold voltage | Rising (%V OUT ) | 92% | 95% | 98% | ||
| Falling (%V OUT ) | 87% | 90% | 94% | ||||
| V OL_PG I | Power good output low Input leakage current (PG) | I PG =-2mA V =1.8V | 0.07 1 | 0.3 400 | V nA | ||
| I SS/TR | SS/TR pin source current | 2.3 | 2.5 | 2.7 | μA | ||
| POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH | POWER SWITCH |
| R DS(ON) | High-side MOSFET ON-resistance | V IN ≥6V | 90 | 170 | mΩ | ||
| R DS(ON) | V IN =3V | 120 | |||||
| R DS(ON) | V IN ≥6V | 40 | 70 | ||||
| R DS(ON) | Low-side MOSFET ON-resistance | V IN =3V | 50 | mΩ | |||
| I LIMF | High-side MOSFET forward current limit (3) | V IN =12V, T A = 25°C | 3.6 | 4.2 | 4.9 | A | |
| OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT | OUTPUT |
| I LKG_FB | Input leakage current (FB) | TPS62130, V FB =0.8V | 1 | 100 | nA | ||
| I LKG_FB | Output voltage range (TPS62130) | V IN ≥ V OUT | 0.9 | 6.0 | V | ||
| I LKG_FB | DEF (Output voltage programming) | DEF=0 (GND) | V OUT | V OUT | |||
| I LKG_FB | DEF=1 (V OUT ) | V OUT +5% | V OUT +5% | ||||
| I LKG_FB | PWM mode operation, V IN ≥ V OUT | +1V | 785.6 | 800 | 814.4 | ||
| V OUT | Initial output voltage accuracy (4) | PWM mode operation, V IN ≥ V OUT T A = -10°C to 85°C | +1V, | 788.0 | 800 | 812.8 | mV |
| I LKG_FB | Power Save Mode operation, C OUT | =22μF | 781.6 | 800 | 822.4 | ||
| I LKG_FB | Tracking Feedback Voltage (TPS62130) | V SS/TR = 350mV | 212.6 | 225 | 237.4 | mV | |
| I LKG_FB | Load regulation (5) | V IN =12V, V OUT =3.3V, PWM mode | operation | 0.05 | %/A | ||
| I LKG_FB | Line regulation (5) | 3V ≤ V IN ≤ 17V, V OUT =3.3V, I OUT = 1A, PWM mode operation | 0.02 | %/V |
Absolute Maximum Ratings
over operating junction temperature range (unless otherwise noted)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Pin voltage range (2) | AVIN, PVIN | -0.3 | 20 | V |
| Pin voltage range (2) | EN, SS/TR | -0.3 | V IN +0.3 | V |
| Pin voltage range (2) | SW | -0.3 | V IN +0.3 | V |
| Pin voltage range (2) | DEF, FSW, FB, PG, VOS | -0.3 | 7 | V |
| Power Good sink current | PG | 10 | mA | |
| Operating junction temperature, T J | Operating junction temperature, T J | -40 | 150 | °C |
| Storage temperature, T stg | Storage temperature, T stg | -65 | 150 | °C |
Recommended Operating Conditions
over operating junction temperature range (unless otherwise noted)
| MIN | MAX | UNIT | |
|---|---|---|---|
| Supply Voltage, V IN (at AVIN and PVIN) | 3 | 17 | V |
| Operating junction temperature, T J | -40 | 125 | °C |
Thermal Information
| THERMAL METRIC (1) | THERMAL METRIC (1) | TPS6213X RGT 16 PINS | UNITS |
|---|---|---|---|
| R θJA | Junction-to-ambient thermal resistance | 45 | °C/W |
| R θJCtop | Junction-to-case(top) thermal resistance | 53.6 | °C/W |
| R θJB | Junction-to-board thermal resistance | 17.4 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 1.1 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 17.4 | °C/W |
| R θJCbot | Junction-to-case(bottom) thermal resistance | 4.5 | °C/W |
Typical Application
The TPS6213x is a switched mode step-down converter that is able to convert a 3V- to 17-V input voltage into a 0.9-V to 6-V output voltage, providing up to 3 A. The device needs a minimum amount of external components. Apart from the LC output filter and the input capacitors, only the TPS62130 (TPS62130A) with adjustable output voltage needs an additional resistive divider to set the output voltage level.
Related Variants
The following components are covered by the same datasheet.
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free