TLV2374IPW
Operational AmplifierThe TLV2374IPW is a operational amplifier from Texas Instruments. View the full TLV2374IPW datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TLV2374IPW shares its datasheet with TLV2374, whose page lists every part number it covers.
Official TLV2374IPW datasheet (PDF) — the source this page was extracted from.
TLV2374IPW Key Specifications
| Parameter | Value |
|---|---|
| Slew Rate | 2.4 V/µs |
| Supply Current | 550 µA/channel |
| Input/Output Type | Rail-to-rail input and output |
| Input Bias Current | 1 pA |
| Number Of Channels | 4 |
| Package Dimensions | 5.00mm x 4.40mm |
| Input Noise Voltage | 39 nV/√Hz |
| Input Offset Voltage | 500 µV |
| Output Drive Current | 105 mA |
| Supply Voltage Range | 2.7V to 16V |
| Gain Bandwidth Product | 3 MHz |
| Operating Temperature Range | -40°C to 125°C |
TLV2374IPW Overview
Part: TLV2374IDR (TLV237x family: TLV2370/1/2/3/4/5) — Texas Instruments
Type: Rail-to-Rail Input/Output CMOS Operational Amplifier (quad, TLV2374)
Description: 2.7–16 V single-supply, 3 MHz GBW, 2.4 V/μs slew rate rail-to-rail input and output op amp family with 550 μA/channel supply current and 105 mA output drive.
Operating Conditions:
- Supply voltage: 2.7–16 V single supply (±1.35 to ±8 V split supply)
- Operating temperature: -40 to 125 °C (I-suffix)
- Common-mode input voltage: 0 to VDD
Absolute Maximum Ratings:
- Max supply voltage: 16.5 V
- Max output current: ±100 mA
- Max input current: ±10 mA
- Max junction temperature: 150 °C
- Storage temperature: -65 to 150 °C
Key Specs:
- Gain-bandwidth product: 3 MHz
- Slew rate: 2.4 V/μs
- Supply current: 550 μA/channel
- Input bias current: 1 pA
- Input noise voltage: 39 nV/√Hz
- Input offset voltage: 500 μV (family comparison table)
- Shutdown supply current: 25 μA/channel (shutdown versions)
- Output drive: 105 mA
- Unity-gain stable
Features:
- Rail-to-rail input and output
- Low-power shutdown mode (TLV2370, TLV2373, TLV2375)
- CMOS inputs suited to high-impedance sensor interfaces
- Compatible with Li-ion battery systems and micropower microcontrollers such as TI MSP430
- Replacement for TLV227x in battery-powered applications
Applications:
- White goods
- Handheld test equipment
- Portable blood glucose meters
- Remote sensing
- Active filters
- Industrial automation
- Battery-powered electronics
Package:
- TLV2374: SOIC (14) 8.65 mm × 3.91 mm
- TLV2374: PDIP (14) 19.30 mm × 6.35 mm
- TLV2374: TSSOP (14) 5.00 mm × 4.40 mm
TLV2374IPW Pin Configuration
TLV2370 DBV Package 6-Pin SOT-23 Top View
TLV2374IPW Electrical Characteristics
at TA = 25°C, VDD = 2.7 V, 5 V, and 15 V (unless otherwise noted).
| PARAMETER | TEST | CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|---|
| DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE |
| V OS | Input offset voltage | At T A = 25°C, V IC = V DD /2, V O = V DD /2, R S = 50 Ω | At T A = 25°C, V IC = V DD /2, V O = V DD /2, R S = 50 Ω | 2 | 4.5 | mV | |
| V OS | Input offset voltage | At T A = -40°C to +125°C, V IC = V DD /2, V O = V DD /2, R S = 50 Ω | At T A = -40°C to +125°C, V IC = V DD /2, V O = V DD /2, R S = 50 Ω | 6 | mV | ||
| dV OS /dT | Offset voltage drift | At T A = 25°C, V IC = V DD /2, V O = V DD /2, R S = 50 Ω | At T A = 25°C, V IC = V DD /2, V O = V DD /2, R S = 50 Ω | 2 | μV/°C | ||
| dV OS /dT | Offset voltage drift | V DD = 2.7 V, R S = 50 Ω | V IC = 0 to V DD | 50 | 68 | ||
| dV OS /dT | Offset voltage drift | V DD = 2.7 V, R S = 50 Ω | At T A = -40°C to +125°C, V IC = 0 to V DD | 49 | |||
| dV OS /dT | Offset voltage drift | V DD = 2.7 V, R S = 50 Ω | V IC = 0 to V DD - 1.35 V | 56 | 70 | ||
| dV OS /dT | Offset voltage drift | V DD = 2.7 V, R S = 50 Ω | At T A = -40°C to +125°C, V IC = 0 to V DD - 1.35 V | 54 | |||
| dV OS /dT | Offset voltage drift | V DD = 5 V, R S = 50 Ω | V IC = 0 to V DD | 55 | 72 | ||
| dV OS /dT | Common-mode rejection | V DD = 5 V, R S = 50 Ω | At T A = -40°C to +125°C, V IC = 0 to V DD | 54 | |||
| dV OS /dT | ratio | V DD = 5 V, R S = 50 Ω | V IC = 0 to V DD - 1.35 V | 67 | 80 | dB | |
| dV OS /dT | Offset voltage drift | V DD = 5 V, R S = 50 Ω | At T A = -40°C to +125°C, V IC = 0 to V DD - 1.35 V | 64 | |||
| dV OS /dT | Offset voltage drift | V DD = 15 V, R S = 50 Ω | V IC = 0 to V DD | 64 | 82 | ||
| dV OS /dT | Offset voltage drift | V DD = 15 V, R S = 50 Ω | At T A = -40°C to +125°C, V IC = 0 to V DD | 63 | |||
| dV OS /dT | Offset voltage drift | V DD = 15 V, R S = 50 Ω | V IC = 0 to V DD - 1.35 V | 67 | 84 | ||
| dV OS /dT | Offset voltage drift | V DD = 15 V, R S = 50 Ω | At T A = -40°C to +125°C, V IC = 0 to V DD - 1.35 V | 66 | |||
| A VD | Large-signal differential voltage amplification | V DD = 2.7 V, V O(PP) = V DD /2, R L = 10 k Ω | 98 | 106 | dB | ||
| A VD | Large-signal differential voltage amplification | V DD = 2.7 V, V O(PP) = V DD /2, R L = 10 k Ω | At T A = -40°C to +125°C | 76 | dB | ||
| A VD | Large-signal differential voltage amplification | V DD = 5 V, V O(PP) = V DD /2, R L = 10 k Ω | 100 | 110 | dB | ||
| A VD | Large-signal differential voltage amplification | V DD = 5 V, V O(PP) = V DD /2, R L = 10 k Ω | At T A = -40°C to +125°C | 86 | dB | ||
| A VD | Large-signal differential voltage amplification | V DD = 15 V, V O(PP) = V DD /2, R L = 10 k Ω | 81 | 83 | dB | ||
| A VD | Large-signal differential voltage amplification | V DD = 15 V, V O(PP) = V DD /2, R L = 10 k Ω | At T A = -40°C to +125°C | 79 | dB | ||
| INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS |
| I OS | Input offset current | V DD = 15 V, V IC = V O = V DD /2 | 1 | 60 | pA | ||
| I OS | Input offset current | At T | A = 70°C At T A = 125°C | 100 1000 | pA | ||
| I B | Input bias current | V DD = 15 V, V IC = V O = V DD /2 | 1 | 60 | pA | ||
| I B | Input bias current | V DD = 15 V, V IC = V O = V DD /2 | At T A = 70°C | 100 | pA | ||
| I B | Differential input resistance | A | 1000 | G Ω | |||
| Common-mode input capacitance | f = 21 kHz | 8 | pF |
at TA = 25°C, VDD = 2.7 V, 5 V, and 15 V (unless otherwise noted).
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|
| OUTPUT CHARACTERISTICS |
at TA = 25°C, VDD = 2.7 V, 5 V, and 15 V (unless otherwise noted).
IOL = 5 mA
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|
| V DD = 2.7 V V DD = 5 V V DD = 15 V | At T A = 25°C, V IC = V DD /2, I OH = - 1 mA At T A = -40°C to +125°C, V IC = V DD /2, I OH = - 1 mA At T A = 25°C, V IC = V DD /2, I OH = - 1 mA At T A = -40°C to +125°C, V IC = V DD /2, I OH = - 1 mA At T A = 25°C, V IC = V DD /2, I OH = - 1 mA At T A = -40°C to +125°C, V IC = V DD /2, I OH = - 1 mA | 2.55 2.48 4.9 4.85 14.92 14.9 | 2.58 4.93 14.96 | ||||
| V OH | High-level output voltage | V DD = 2.7 V V DD = 5 V V DD = 15 V V DD = 2.7 V V DD = 5 V V DD = 15 V | At T A = 25°C, V IC = V DD /2, I OH = - 5 mA At T A = -40°C to +125°C, V IC = V DD /2, I OH = - 5 mA At T A = 25°C, V IC = V DD /2, I OH = - 5 mA At T A = -40°C to +125°C, V IC = V DD /2, I OH = - 5 mA At T A = 25°C, V IC = V DD /2, I OH = - 5 mA At T A = -40°C to +125°C, V IC = V DD /2, I OH = - 5 mA At T A = 25°C, V IC = V DD /2, I OL = 1 mA At T A = -40°C to +125°C, V IC = V DD /2, I OL = 1 mA At T A = 25°C, V IC = V DD /2, I OL = 1 mA At T A = -40°C to +125°C, V IC = V DD /2, I OL = 1 mA At T A = 25°C, V IC = V DD /2, I OL = 1 mA At T A = -40°C to +125°C, V IC = V DD /2, I = 1 mA | 1.9 1.6 4.6 4.5 14.7 14.6 | 2 4.68 14.8 0.1 0.05 0.05 | 0.15 0.22 0.1 0.15 0.08 0.1 | V |
| V OL | Low-level output voltage | V DD = 2.7 V V DD = 5 V | OL At T A = 25°C, V IC = V DD /2, I OL = 5 mA At T A = -40°C to +125°C, V IC = V DD /2, I OL = 5 mA At T A = 25°C, V IC = V DD /2, I OL = 5 mA At T A = -40°C to +125°C, V IC = V DD /2, | 0.52 0.28 | 0.7 1.1 0.4 0.5 | V |
- www.ti.com.cn - Electrical Characteristics (continued) - at T A = 25°C, V DD = 2.7 V, 5 V, and 15 V Electrical Characteristics (continued) - (unless otherwise TEST CONDITIONS At T A = 25°C, 5 mA ZHCSHJ3F-MARCH - noted). V IC = V DD /2, I OL = ZHCSHJ3F-MARCH - 2001-REVISED AUGUST - TYP 0.19 ZHCSHJ3F-MARCH
- V DD = 15 V At T A = -40°C to +125°C, V IC = V DD /2, I OL = 5 mA 0.35
- V DD = 2.7 V, V O = 0.5 V from rail Positive rail 4
- V DD = 2.7 V, V O = 0.5 V from rail Negative rail 5
- Output current V DD = 5 V, V O = 0.5 V from rail Positive rail 7
- I O V DD = 5 V, V O = 0.5 V from rail Negative rail 8
- V DD = 15 V, V O = 0.5 V from rail Positive rail 16
- V DD = 15 V, V O = 0.5 V from rail Negative rail 15
at TA = 25°C, VDD = 2.7 V, 5 V, and 15 V (unless otherwise noted).
| PARAMETER | TEST | CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|---|
| POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY | POWER SUPPLY |
| I DD | Supply current (per channel) | V DD = 2.7 V, V O = V DD /2 | V DD = 2.7 V, V O = V DD /2 | 470 | 560 | μA | |
| I DD | Supply current (per channel) | V DD = 5 V, V O = V DD /2 | V DD = 5 V, V O = V DD /2 | 550 | 660 | μA | |
| I DD | Supply current (per channel) | V DD = 15 V, V O = V DD /2 | At T A = 25°C | 750 | 900 | μA | |
| I DD | Supply current (per channel) | V DD = 15 V, V O = V DD /2 | At T A = -40°C to +125°C | 1200 | μA | ||
| PSRR | Power-supply rejection ratio ( Δ V DD / Δ V IO ) | V DD = 2.7 V to 15 V, V IC = V DD /2, no load | At T A = 25°C | 70 | 80 | dB | |
| PSRR | Power-supply rejection ratio ( Δ V DD / Δ V IO ) | V DD = 2.7 V to 15 V, V IC = V DD /2, no load | At T A = -40°C to +125°C | 65 | dB | ||
| DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE |
| UGBW | Unity gain bandwidth | V DD = 2.7 V | R L = 2 k Ω , C L = 10 pF | 2.4 | MHz | ||
| UGBW | Unity gain bandwidth | V DD = 5 V to 15 V | R L = 2 k Ω , C L = 10 pF | 3 | MHz | ||
| SR | Slew rate at unity gain | V DD = 2.7 V | At T A = 25°C, V O(PP) = V DD /2, C L = 50 pF, R L = 10 k Ω | 1.4 | 2 | V/μs | |
| SR | Slew rate at unity gain | V DD = 2.7 V | At T A = -40°C to +125°C, V O(PP) = V DD /2, C L = 50 pF, R L = 10 k Ω | 1 | V/μs | ||
| SR | Slew rate at unity gain | V DD = 5 V | At T A = 25°C, V O(PP) = V DD /2, C L = 50 pF, R L = 10 k Ω | 1.6 | 2.4 | V/μs | |
| SR | Slew rate at unity gain | V DD = 5 V | At T A = -40°C to +125°C, V O(PP) = V DD /2, C L = 50 pF, R L = 10 k Ω | 1.2 | V/μs | ||
| SR | Slew rate at unity gain | V DD = 15 V | At T A = 25°C, V O(PP) = V DD /2, C L = 50 pF, R L = 10 k Ω | 1.9 | 2.1 | V/μs | |
| SR | Slew rate at unity gain | V DD = 15 V | At T A = -40°C to +125°C, V O(PP) = V DD /2, C L = 50 pF, R L = 10 k Ω | 1.4 | V/μs | ||
| φ m | Phase margin | R L = 2 k Ω , C L = 100 pF | R L = 2 k Ω , C L = 100 pF | 65 | ° | ||
| φ m | Gain margin | R L = 2 k Ω , C L = 10 pF | R L = 2 k Ω , C L = 10 pF | 18 | dB | ||
| t s | Settling time | V DD = 2.7 V, V (STEP)PP = 1 V, A V = - 1, C L = 10 pF, R L = 2 k Ω , 0.1% | V DD = 2.7 V, V (STEP)PP = 1 V, A V = - 1, C L = 10 pF, R L = 2 k Ω , 0.1% | 2.9 | μs | ||
| t s | Settling time | V DD = 5 V, 15 V, V (STEP)PP = 1 V, A V = - 1, C L = 47 pF, R L = 2 k Ω , 0.1% | V DD = 5 V, 15 V, V (STEP)PP = 1 V, A V = - 1, C L = 47 pF, R L = 2 k Ω , 0.1% | 2 | μs |
at TA = 25°C, VDD = 2.7 V, 5 V, and 15 V (unless otherwise noted).
| PARAMETER | PARAMETER | TEST CONDITIONS | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| NOISE, DISTORTION PERFORMANCE | NOISE, DISTORTION PERFORMANCE | NOISE, DISTORTION PERFORMANCE | NOISE, DISTORTION PERFORMANCE | NOISE, DISTORTION PERFORMANCE | NOISE, DISTORTION PERFORMANCE | NOISE, DISTORTION PERFORMANCE | NOISE, DISTORTION PERFORMANCE |
| THD + N | Total harmonic distortion | V DD = 2.7 V | V O(PP) = V DD /2 V, R L = 2 k Ω , f = 10 kHz, A V = 1 | 0.02% | |||
| THD + N | V DD = 2.7 V | V O(PP) = V DD /2 V, R L = 2 k Ω , f = 10 kHz, A V = 10 | 0.05% | ||||
| THD + N | V DD = 2.7 V | V O(PP) = V DD /2 V, R L = 2 k Ω , f = 10 kHz, A V = 100 | 0.18% | ||||
| THD + N | plus noise | V DD = 5 V, 15 V | V O(PP) = V DD /2 V, R L = 2 k Ω , f = 10 kHz, A V = 1 | 0.02% | |||
| THD + N | V DD = 5 V, 15 V | V O(PP) = V DD /2 V, R L = 2 k Ω , f = 10 kHz, A V = 10 | 0.09% | ||||
| THD + N | V DD = 5 V, 15 V | V O(PP) = V DD /2 V, R L = 2 k Ω , f = 10 kHz, A V = 100 | 0.5% | ||||
| V n | Equivalent input noise | f = 1 kHz | f = 1 kHz | 39 | nV/ √ Hz | ||
| V n | voltage | f = 10 kHz | f = 10 kHz | 35 | nV/ √ Hz | ||
| I n | Equivalent input noise current | f = 1 kHz | f = 1 kHz | 0.6 | fA/ √ Hz | ||
| SHUTDOWN CHARACTERISTICS | SHUTDOWN CHARACTERISTICS | SHUTDOWN CHARACTERISTICS | SHUTDOWN CHARACTERISTICS | SHUTDOWN CHARACTERISTICS | SHUTDOWN CHARACTERISTICS | SHUTDOWN CHARACTERISTICS | SHUTDOWN CHARACTERISTICS |
| I DD(SHDN) | Supply current in shutdown mode (TLV2370, TLV2373, TLV2375) (per channel) | V DD = 2.7 V, 5 V, SHDN = 0 V | At T A = 25°C | 25 | 30 | μA | |
| I DD(SHDN) | V DD = 2.7 V, 5 V, SHDN = 0 V | At T A = -40°C to +125°C | 35 | μA | |||
| I DD(SHDN) | V DD = 15 V, SHDN = 0 V | At T A = 25°C | 40 | 45 | μA | ||
| I DD(SHDN) | V DD = 15 V, SHDN = 0 V | At T A = -40°C to +125°C | 50 | μA | |||
| t (on) | Amplifier turnon time (1) | R L = 2 k Ω | R L = 2 k Ω | 0.8 | μs | ||
| t (off) | Amplifier turnoff time (1) | R L = 2 k Ω | R L = 2 k Ω | 1 | μs |
TLV2374IPW Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Voltage | Supply voltage, V DD (2) | 16.5 | V | |
| Voltage | Differential input voltage, V ID | -V DD | V DD | V |
| Voltage | Input voltage, V I (2) | -0.2 | V DD + 0.2 | V |
| Input current, I IN | -10 | 10 | mA | |
| Output current, I O | -100 | 100 | mA | |
| Operating free-air temperature, T A : I-suffix | -40 | 125 | °C | |
| Maximum junction temperature, T J | 150 | °C | ||
| Storage temperature, T stg | -65 | 150 | °C |
TLV2374IPW Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted).
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Supply voltage, V DD | Single supply | 2.7 | 16 | V |
| Supply voltage, V DD | Split supply | ±1.35 | ±8 | V |
| Common-mode input voltage, V CM | Common-mode input voltage, V CM | 0 | V DD | V |
| Operating free-air temperature, T A | I-suffix | -40 | 125 | °C |
| Turnon voltage (shutdown pin voltage level), V (ON) , relative to GND pin voltage | Turnon voltage (shutdown pin voltage level), V (ON) , relative to GND pin voltage | 2 | V | |
| Turnoff (shutdown pin voltage level), V (OFF) , relative to GND pin voltage | Turnoff (shutdown pin voltage level), V (OFF) , relative to GND pin voltage | 0.8 | V |
TLV2374IPW Thermal Information
| THERMAL METRIC (1) | THERMAL METRIC (1) | TLV2370 - DBV (SOT-23) - 6 PINS | TLV2370 - D (SOIC) - 8 PINS | TLV2370 - P (PDIP) - 8 PINS | UNIT |
|---|---|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 228.5 | 138.4 | 49.2 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 99.1 | 89.5 | 39.4 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 54.6 | 78.6 | 26.4 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 7.7 | 29.9 | 15.4 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 53.8 | 78.1 | 26.3 | °C/W |
| R θ JC(bot) | Junction-to-case (bottom) thermal resistance | n/a | n/a | n/a | °C/W |
TLV2374IPW Typical Application
When designing for low power, choose system components carefully. To minimize current consumption, select large-value resistors. Any resistors react with stray capacitance in the circuit and the input capacitance of the operational amplifier. These parasitic RC combinations affect the stability of the overall system. Use of a feedback capacitor assures stability and limits overshoot or gain peaking.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TLV2370 | Texas Instruments | — |
| TLV2371 | Texas Instruments | — |
| TLV2372 | Texas Instruments | — |
| TLV2373 | Texas Instruments | — |
| TLV2374 | Texas Instruments | — |
| TLV2374-EP | Texas Instruments | — |
| TLV2374-Q1 | Texas Instruments | — |
| TLV2374ID | Texas Instruments | SOIC-14 |
| TLV2374IDG4 | Texas Instruments | SOIC-14 |
| TLV2374IDR | Texas Instruments | PDIP-14 |
| TLV2374IN | Texas Instruments | PDIP-14 |
| TLV2374IPWG4 | Texas Instruments | TSSOP-14 |
| TLV2374IPWR | Texas Instruments | TSSOP-14 |
| TLV2375 | Texas Instruments | — |
Other Operational Amplifiers
- LM358 – onsemi, Dual Operational Amplifier
- NE5532 – Texas Instruments, Dual Operational Amplifier
- AD623A – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARMZ-REEL7 – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ-RL – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623B – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623BNZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
All Operational Amplifiers datasheetsAll Texas Instruments datasheets (2,442)
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the TLV2374IPW
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TLV2374IPW run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.