MX25R6435FM2IH0

Serial NOR Flash Memory

The MX25R6435FM2IH0 is a serial nor flash memory from Macronix International Co., Ltd.. View the full MX25R6435FM2IH0 datasheet below including key specifications, electrical characteristics.

Official MX25R6435FM2IH0 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Macronix International Co., Ltd.

MX25R6435FM2IH0 Key Specifications

Parameter	Value
Endurance	100,000 program/erase cycles
Interface	SPI (Single I/O, Dual I/O, Quad I/O)
Page Size	256 bytes
Memory Size	64Mbit (8,388,608 x 8)
Default Mode	High Performance Mode
Reset/Hold Pin	RESET#
Supply Voltage	1.65V to 3.6V
Erase Granularity	4KB sector, 32KB/64KB block, chip
Security Features	Unique ID, 8K-bit Secured OTP
Operating Temperature	-40°C to 85°C

MX25R6435FM2IH0 Overview

Part: MX25R6435F — Macronix Type: Serial NOR Flash Memory Description: 64M-bit (8,388,608 x 8 internally) ultra-low power serial NOR flash memory with multi I/O support (x1, x2, x4), operating from 1.65V to 3.6V, featuring program/erase suspend/resume, unique ID, and secure OTP.

Operating Conditions:

Supply voltage: 1.65V-3.6V
Operating temperature: -40 to +85 °C (suffix-dependent — see Table 17 for grade-specific ranges)
Max clock frequency: 80 MHz (1 I/O), 80 MHz (2 I/O, equivalent to 160 MHz), 80 MHz (4 I/O, equivalent to 320 MHz)

Absolute Maximum Ratings:

Max supply voltage: 4.0 V
Max junction/storage temperature: -65 to +150 °C

Key Specs:

Memory size: 64 M-bit
Erase/program cycles: Minimum 100,000
Data retention: 20 years
Read current (Active, 80MHz, 4 I/O): 1.5 mA (Typ) at VCC=1.8V, 2.5 mA (Typ) at VCC=3.0V
Deep Power-down current: 0.1 μA (Typ) at VCC=1.8V, 0.2 μA (Typ) at VCC=3.0V
Page Program time: 0.7 ms (Typ)
Sector Erase time (4K-byte): 40 ms (Typ)
Chip Erase time: 10 s (Typ)
Latch-up protection: 100mA from -1V to Vcc +1V

Features:

Ultra Low Power Mode and High Performance Mode
Multi I/O Support - Single I/O, Dual I/O and Quad I/O
Program Suspend/Resume & Erase Suspend/Resume
Unique ID and Secure OTP Support
Block lock protection
JEDEC 1-byte manufacturer ID and 2-byte device ID
Support Serial Flash Discoverable Parameters (SFDP) mode

Applications:

Package:

8-pin SOP (200mil)
8-land WSON (6x5mm)
8-land USON (4x4mm)
8-land USON (4x3mm)
22-ball WLCSP (3-2-3 Ball Array)

MX25R6435FM2IH0 Features

Ultra Low Power Mode and High Performance Mode
Wide Range VCC 1.65V-3.6V for Read, Erase and Program Operations
Unique ID and Secure OTP Support
Multi I/O Support - Single I/O, Dual I/O and Quad I/O
Program Suspend/Resume & Erase Suspend/Resume

MX25R6435FM2IH0 Pin Configuration

SYMBOL	DESCRIPTION
CS#	Chip Select
SI/SIO0	Serial Data Input (for 1 x I/O)/ Serial Data Input & Output (for 4xI/O read mode)
SO/SIO1	Serial Data Output (for 1 x I/O)/ Serial Data Input & Output (for 4xI/O read mode)
SCLK	Clock Input
WP#/SIO2	Write Protection Active Low or Serial Data Input & Output (for 4xI/O read mode)
RESET#/SIO3 *	Hardware Reset Pin Active low or Serial Data Input & Output (for 4xI/O read mode)
HOLD#/SIO3 *	To pause the device without deselecting the device or Serial Data Input & Output (for 4xI/O read mode)
VCC	Power Supply
GND	Ground

The pin of RESET#/SIO3, HOLD#/SIO3 or WP#/SIO2 will remain internal pull up function while this pin is not physically connected in system configuration. However, the internal pull up function will be disabled if the system has physical connection to RESET#/ SIO3, HOLD#/SIO3 or WP#/SIO2 pin.

MX25R6435FM2IH0 Electrical Characteristics

Table 14. Absolute Maximum Ratings

Rating		Value
Ambient Operating Temperature	Industrial grade	-40°C to 85°C
Storage Temperature	Storage Temperature	-65°C to 150°C
Applied Input Voltage	Applied Input Voltage	-0.5V to VCC+0.5V
Applied Output Voltage	Applied Output Voltage	-0.5V to VCC+0.5V
VCC to Ground Potential	MX25R (1.65V-3.6V)	-0.5V to 4.0V

MX25R6435FM2IH0 Package Information

, Height:0.52mm

Please contact local Macronix sales channel for complete package dimensions.

, Height:0.395mm

Please contact local Macronix sales channel for complete package dimensions.

Other Memory ICs

CH347T – WCH, Serial SLC NAND Flash Memory
M24512-DFMC6TG – STMicroelectronics, EEPROM
ST25DV04KC-JF6L3 – STMicroelectronics, Dynamic NFC/RFID Tag IC
ZD25WQ16CTIGT – Zetta, Serial Multi I/O NOR Flash
W25Q32JVSSIQ – Winbond
23A1024 – Microchip Technology, Serial SRAM
23LC1024 – Microchip Technology, Serial SRAM
23LC1024-I/P – Microchip Technology, Serial SRAM

All Memory ICs datasheets

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the MX25R6435FM2IH0

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the MX25R6435FM2IH0 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.