MPU6050/HTML/CLASS

6-axis Accelerometer and Gyro

The MPU6050/HTML/CLASS is a 6-axis accelerometer and gyro from TDK InvenSense. View the full MPU6050/HTML/CLASS datasheet below including key specifications.

MPU6050/HTML/CLASS shares its datasheet with MPU6050, whose page lists every part number it covers.

Official MPU6050/HTML/CLASS datasheet (PDF) — the source this page was extracted from.

Manufacturer

TDK InvenSense

MPU6050/HTML/CLASS Key Specifications

Parameter	Value
Sensing axes	6 (3-axis accelerometer, 3-axis gyroscope)
Measurement resolution	16-bit
Onboard voltage regulator output	3.3V, up to 100mA
I2C pull-up resistors	10K
I2C slave addresses	0x68 (default), 0x69 (AD0 high)
Digital interface	I2C

MPU6050/HTML/CLASS Overview

Part: MPU6050 6-axis Accelerometer and Gyro (Adafruit Breakout)

Type: 6-axis Accelerometer and Gyro, Inertial Measurement Unit (IMU)

Description: The MPU-6050 is a 6-axis accelerometer and gyroscope with 16-bit measurements, provided on an Adafruit breakout board with an integrated voltage regulator and STEMMA QT connectors for easy use.

Operating Conditions:

Supply voltage: 3–5 VDC (to breakout board)
Accelerometer range: ±2G, ±4G, ±8G, ±16G
Gyro range: ±250 deg/s, ±500 deg/s, ±1000 deg/s, ±2000 deg/s
Filter bandwidth: 5 Hz, 10 Hz, 21 Hz, 44 Hz, 94 Hz, 184 Hz, 260 Hz

Absolute Maximum Ratings:

Key Specs:

Sensing axes: 6 (3-axis accelerometer, 3-axis gyroscope)
Measurement resolution: 16-bit
Onboard voltage regulator output: 3.3V, up to 100mA
I2C pull-up resistors: 10K
I2C slave addresses: 0x68 (default), 0x69 (AD0 high)
Digital interface: I2C
Interrupt pin: Available for new data or other conditions

Features:

Six axes of sensing (accelerometer and gyroscope)
16-bit measurements
Integrated voltage regulator for 3-5VDC input
I2C interface with 3-5V logic level shifting
SparkFun Qwiic compatible STEMMA QT JST SH connectors
Configurable I2C address via AD0 pin or solder jumper
Interrupt pin for event notification

Applications:

Providing balance sensing for robots
Adding telemetry to projects (e.g., water rockets)

Package:

Breakout board with STEMMA QT JST SH connectors

Other IMUs / Motion Sensors

LIS3DH – STMicroelectronics, 3-axis Linear Accelerometer
LSM6DSL – STMicroelectronics, iNEMO Inertial Module (3D Accelerometer and 3D Gyroscope)
BMI270 – Bosch Sensortec, Inertial Measurement Unit
LSM6DSV32XTR – STMicroelectronics, Inertial Measurement Unit
ADXL345 – Analog Devices, 3-Axis Digital Accelerometer
ADXL345BCCZ – Analog Devices, 3-Axis Digital Accelerometer
ADXL345BCCZ-RL – Analog Devices, 3-Axis Digital Accelerometer
ADXL345BCCZ-RL7 – Analog Devices, 3-Axis Digital Accelerometer

All IMUs / Motion Sensors datasheets All TDK InvenSense datasheets (14)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the MPU6050/HTML/CLASS

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the MPU6050/HTML/CLASS run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.