MIC5304
Low Dropout RegulatorThe MIC5304 is a low dropout regulator from Micrel. View the full MIC5304 datasheet below including pinout.
Manufacturer
Micrel
Category
Low Dropout Regulator
Overview
Part: MIC5504-3.3YM5
Type: Low Dropout Regulator (LDO)
Description: Single output LDO with up to 5.5V input and 300mA output, available in 1x1mm DFN and SOT23 packages.
Operating Conditions:
- Supply voltage: Up to 5.5V
- Max output current: 300mA
Key Specs:
- Max output current: 300mA
- Max input voltage: 5.5V
- Number of outputs: Single
- DFN package size: 1x1mm
Features:
- Single Output
- Small Size
- General Purpose
Package:
- 1x1mm DFN
- SOT23
Pin Configuration
MIC5304 Pinout
Package: DFN6 (1.6×1.6 mm)
| Pin Number | Pin Name | Type | Description |
|---|---|---|---|
| 1 | IN | P | Input Supply Voltage |
| 2 | GND | P | Ground |
| 3 | EN | I | Enable Control (Active High) |
| 4 | FB | I | Feedback / Voltage Select |
| 5 | OUT | O | Regulated Output |
| 6 | OUT | O | Regulated Output |
Notes
- Pins 5 & 6: Both pins are connected to the output and should be tied together externally for optimal performance.
- Package: 1.6×1.6 mm DFN with 0.5 mm pitch.
- Key Features: 85 mV dropout, 0.5% accuracy, 24 μA quiescent current, selectable output voltage via FB pin.
- Pin 4 (FB): Selectable output voltage configuration; see datasheet for resistor divider or selection options.
Related Variants
The following components are covered by the same datasheet.
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free