ME6211C33M5G

ME6211

Manufacturer

unknown

Overview

Part: ME6211 series, Microne

Type: High Speed LDO Voltage Regulator

Key Specs:

  • Maximum Output Current: 500mA (VIN=4.3V,VOUT=3.3V)
  • Dropout Voltage: 100mV@ IOUT =100mA
  • Operating Voltage Range: 2V~6.0V
  • Highly Accuracy: ±2%
  • Low Power Consumption: 40uA(TYP.)
  • Standby Current: 0.1uA(TPY.)
  • High Ripple Rejection: 70dB@1KHz
  • Low output noise: 50uVrms
  • Line Regulation: 0.05%(TYP.)

Features:

  • Highly accurate
  • Low noise
  • High ripple rejection ratio
  • Low dropout
  • Very fast turn-on times
  • Internal reference voltage source, error amplifiers, driver transistors, current limiters and phase compensators
  • Current limiters' foldback circuit operates as a short protect
  • Compatible with low ESR ceramic capacitors
  • Excellent transient response performance
  • High PSRR across a broad range of frequencies
  • CE function for output turn-off and reduced power consumption

Applications:

  • Mobile phones
  • Cordless phones, radio communication equipment
  • Portable games
  • Cameras, Video cameras
  • Reference voltage sources
  • Battery powered equipment

Package:

  • 3-pin SOT89-3
  • 3-pin SOT23-3
  • 5-pin SOT23-5
  • 5-pin SOT353
  • 6-pin DFN2*2-6L

Features

The ME6211 series are highly accurate, low noise, CMOS LDO Voltage Regulators. Offering low output noise, high ripple rejection ratio, low dropout and very fast turn-on times, the ME6211 series is ideal for today's cutting edge mobile phone. Internally the ME6211 includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase compensators. The ME6211's current limiters' foldback circuit also operates as a short protect for the output current limiter and. the output pin. The ME6211 series is also fully compatible with low ESR ceramic capacitors, reducing cost and improving output stability. This high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance and high PSRR achieved across a broad range of frequencies.The CE function allows the output of regulator to be turned off, resulting in greatly reduced power consumption.

Pin Configuration

Electrical Characteristics

ME6211C12 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC ,unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V300mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		8mV
Dropout VoltageVDIF1IOUT=100mA280mV
(Note 1)VDIF2IOUT=200mA500mV
Supply CurrentISSVIN= VOUT+1V40μA
Stand-by CurrentICELVCE=0V0.1μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
VOUT+1V ≤VIN≤6.5V		=40mA0.03%/V
CE
"High" Voltage		VCEHStart up1.0V
CE
"Low" Voltage		VCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
VIN
= [VOUT		IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRR+1]V +1Vp-pACIOUT=100mA,
10kHZ		62dB

ME6211C18 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V300mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		9mV
Dropout VoltageVDIF1IOUT=100mA200mV
(Note 1)VDIF2IOUT=200mA400mV
Supply CurrentISSVIN= VOUT+1V40μA
Stand-by
Current		ICELVCE=0V0.1μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
VOUT+1V ≤VIN≤6.5V		=40mA0.05%/V
CE
"High" Voltage		VCEHStart up1.0V
CE
"Low" Voltage		VCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
VIN
= [VOUT		IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRR+1]V+1Vp-pACIOUT=100mA,
10kHZ		62dB

ME6211C25 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V400mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		9mV
Dropout VoltageVDIF1IOUT=100mA110mV
(Note 1)VDIF2IOUT=200mA220mV
Supply CurrentISSVIN= VOUT+1V40μA
Stand-by CurrentICELVCE=0V0μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT=40mA
VOUT+1V ≤VIN≤6.5V		0.04%/V
CE"High"VoltageVCEHStart up1.0V
CE "Low" VoltageVCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRRVIN=[VOUT+1]V
+1Vp-pAC		IOUT=100mA,
10kHZ		62dB
IOUT=200mA,
10kHZ		62
Short-circuit CurrentISHORT=0VVIN= VOUT+1V, VCE=VIN, VOUT120mA

ME6211C28 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V450mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		7mV
Dropout VoltageVDIF1IOUT=100mA110mV
(Note 1)VDIF2IOUT=200mA220mV
Supply CurrentISSVIN= VOUT+1V50μA
Stand-by CurrentICELVCE=0V0μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT=40mA
VOUT+1V ≤VIN≤6.5V		0.04%/V
CE"High"VoltageVCEHStart up1.0V
CE "Low" VoltageVCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
VIN=[VOUT+1]VIOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRR+1Vp-pACIOUT=100mA,
10kHZ		62dB

IOUT=200mA,
10kHZ		62
Short-circuit CurrentISHORTVIN= VOUT+1V, VCE=VIN, VOUT
=0V		120

Absolute Maximum Ratings

ParameterSymbolRatingsUnits
Input Voltage;V IN6.5V
Output CurrerntI OUT600mA
Output VoltageV OUTVss-0.3∼V IN +0.3V
CE Pin VoltageV CEVss-0.3∼V IN +0.3V
SOT23300
Dawar DissinationSOT353250^/
Power DissipationDFN2*2-6LPD300mW
SOT89500
Operating Temperature RangeT OPR-40~+150°mathbb{C}
Storage Temperaturee RangeT STG-40~+150° C

V14 www.microne.com.cn Page 5 of 20

Electrical Characteristics

ME6211C12 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC ,unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V300mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		8mV
Dropout VoltageVDIF1IOUT=100mA280mV
(Note 1)VDIF2IOUT=200mA500mV
Supply CurrentISSVIN= VOUT+1V40μA
Stand-by CurrentICELVCE=0V0.1μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
VOUT+1V ≤VIN≤6.5V		=40mA0.03%/V
CE
"High" Voltage		VCEHStart up1.0V
CE
"Low" Voltage		VCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
VIN
= [VOUT		IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRR+1]V +1Vp-pACIOUT=100mA,
10kHZ		62dB

ME6211C18 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V300mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		9mV
Dropout VoltageVDIF1IOUT=100mA200mV
(Note 1)VDIF2IOUT=200mA400mV
Supply CurrentISSVIN= VOUT+1V40μA
Stand-by
Current		ICELVCE=0V0.1μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
VOUT+1V ≤VIN≤6.5V		=40mA0.05%/V
CE
"High" Voltage		VCEHStart up1.0V
CE
"Low" Voltage		VCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
VIN
= [VOUT		IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRR+1]V+1Vp-pACIOUT=100mA,
10kHZ		62dB

ME6211C25 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V400mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		9mV
Dropout VoltageVDIF1IOUT=100mA110mV
(Note 1)VDIF2IOUT=200mA220mV
Supply CurrentISSVIN= VOUT+1V40μA
Stand-by CurrentICELVCE=0V0μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT=40mA
VOUT+1V ≤VIN≤6.5V		0.04%/V
CE"High"VoltageVCEHStart up1.0V
CE "Low" VoltageVCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRRVIN=[VOUT+1]V
+1Vp-pAC		IOUT=100mA,
10kHZ		62dB
IOUT=200mA,
10kHZ		62
Short-circuit CurrentISHORT=0VVIN= VOUT+1V, VCE=VIN, VOUT120mA

ME6211C28 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V450mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		7mV
Dropout VoltageVDIF1IOUT=100mA110mV
(Note 1)VDIF2IOUT=200mA220mV
Supply CurrentISSVIN= VOUT+1V50μA
Stand-by CurrentICELVCE=0V0μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT=40mA
VOUT+1V ≤VIN≤6.5V		0.04%/V
CE"High"VoltageVCEHStart up1.0V
CE "Low" VoltageVCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
VIN=[VOUT+1]VIOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRR+1Vp-pACIOUT=100mA,
10kHZ		62dB

IOUT=200mA,
10kHZ		62
Short-circuit CurrentISHORTVIN= VOUT+1V, VCE=VIN, VOUT
=0V		120

ME6211C30 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V500mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		8mV
Dropout VoltageVDIF1IOUT=100mA100mV
(Note 1)VDIF2IOUT=200mA210mV
Supply CurrentISSVIN= VOUT+1V60μA
Stand-by CurrentICELVCE=0V0μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT=40mA
VOUT+1V ≤VIN≤6.5V		0.05%/V
CE
"High" Voltage		VCEHStart up1.0V
CE
"Low" Voltage		VCELShut down0.5V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRRVIN
= [VOUT
+1]V		IOUT=100mA,
10kHZ		62dB
+1Vp-pACIOUT=200mA,
10kHZ		62
Short-circuit CurrentISHORTVIN= VOUT+1V, VCE=VIN, VOUT
=0V		120mA

ME6211C33 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)IOUT=30mA,X 0.98VOUT
(T)		X 1.02V
Maximum Output Current(Note 2)
IOUTMAX		VIN= VOUT+1V
VIN= VOUT+1V		(Note 1)
500		mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		9mV
Dropout VoltageVDIF1IOUT
=100mA		120mV
(Note 1)VDIF2IOUT
=200mA		260mV
Supply CurrentISSVIN= VOUT+1V60μA
Stand-byCurrentICELVCE=0V0.1μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
=40mA
VOUT+1V ≤VIN≤6.5V		0.05%/V
CE
"High" Voltage		VCEHStart up1.0V

CE
"Low" Voltage		VCELShut down0.5V
Output noiseEN=40mA,300Hz~50kHz
IOUT		50uVrms
IOUT=10mA
,1kHZ		70
Ripple Rejection RatePSRRVIN
= [VOUT
+1]V
+1Vp-pAC		IOUT=100m
A,10kHZ		62dB
IOUT=200m
A,10kHZ		62
Short-circuit CurrentISHORTVIN= VOUT+1V, VCE=VIN, VOUT
=0V		150mA

ME6211C50 (VIN= VOUT+1V,VCE = VIN,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V500mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		8mV
Dropout VoltageVDIF1IOUT=100mA100mV
(Note 1)VDIF2IOUT=200mA200mV
Supply CurrentISSVIN= VOUT+1V40μA
Stand-by CurrentICELVCE=0V0μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
=40mA
VOUT+1V ≤VIN≤6.5V		0.05%/V
CE
"High" Voltage		VCEHStart up1.0V
CE
"Low" Voltage		VCELShut down0.7V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRRVIN
= [VOUT
+1]V +1Vp-pAC		IOUT=100mA,
10kHZ		62dB
IOUT=200mA,
10kHZ		62
Short-circuit CurrentISHORTVIN= VOUT+1V, VCE=VIN, VOUT
=0V		110mA

ME6211A30 (VIN= VOUT+1V,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
X 0.98
VIN= VOUT+1V		VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V500mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		8mV
Dropout VoltageVDIF1IOUT
=100mA		100mV

(Note 1)VDIF2IOUT=200mA210mV
Supply CurrentISSVIN= VOUT+1V60μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
=40mA
VOUT+1V ≤VIN≤6.5V		0.05%/V
Output noiseEN=40mA,300Hz~50kHz
IOUT		50uVrms
IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRRVIN
= [VOUT
+1]V +1Vp-pAC		IOUT=100mA,
10kHZ		62dB
IOUT=200mA,
10kHZ		62
Short-circuit CurrentISHORTVIN= VOUT+1V, VCE=VIN, VOUT
=0V		120mA

ME6211A33 (VIN= VOUT+1V,CIN=CL=1uF,Ta=25OC,unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V500mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		9mV
Dropout VoltageVDIF1IOUT
=100mA		120mV
(Note 1)VDIF2IOUT
=200mA		260mV
Supply CurrentISSVIN= VOUT+1V60μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
=40mA
VOUT+1V ≤VIN≤6.5V		0.05%/V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
IOUT=10mA,
1kHZ		70
Ripple Rejection RatePSRRVIN
= [VOUT
+1]V +1Vp-pAC		IOUT=100mA,
10kHZ		62dB
IOUT=200mA,
10kHZ		62
Short-circuit CurrentISHORTVIN= VOUT+1V,, VOUT=0V150mA

ME6211A25 (VIN= VOUT+1V,CIN=CL=1uF,Ta=25OC,unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V400mA
Load RegulationVIN= VOUT+1V ,
∆VOUT
1mA≤IOUT≤100mA		9mV
Dropout VoltageVDIF1IOUT
=100mA		80mV
(Note 1)VDIF2IOUT
=200mA		180mV

ME6211

Supply CurrentISSVIN= VOUT+1V40μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT
=40mA
VOUT+1V ≤VIN≤6.5V		0.05%/V
Output noiseEN=40mA,300Hz~50kHz
IOUT		50uVrms
VIN
= [VOUT
+1]V
PSRR
+1Vp-pAC		IOUT=10mA
,1kHZ		70
Ripple Rejection RateIOUT=100m
A,10kHZ		62dB
IOUT=200m
A,10kHZ		62
Short-circuit CurrentISHORTVIN= VOUT+1V,, VOUT=0V150mA

ME6211H15

(VIN= VOUT+1V,VCE = GND,CIN=CL=1uF,Ta=25OC, unless otherwise noted)

ParameterSymbolConditionsMin.Typ.Max.Units
Output VoltageVOUT(E)
(Note 2)		IOUT=30mA,
VIN= VOUT+1V		X 0.98VOUT
(T)
(Note 1)		X 1.02V
Maximum Output CurrentIOUTMAXVIN= VOUT+1V300mA
Load Regulation∆VOUTVIN= VOUT+1V ,
1mA≤IOUT≤100mA		9mV
Dropout VoltageVDIF1IOUT
=100mA		200mV
(Note 1)VDIF2IOUT
=200mA		400mV
Supply CurrentISSVIN= VOUT+1V40μA
Stand-by
Current		ICELVCE=VIN0.1μA
Line Regulation∆VOUT
∆VIN
• VOUT		IOUT=40mA
VOUT+1V ≤VIN≤6.5V		0.05%/V
CE
"High" Voltage		VCEHShut down1.0V
CE
"Low" Voltage		VCELStart up0.4V
Output noiseENIOUT=40mA,300Hz~50kHz50uVrms
Ripple Rejection RatePSRRVIN
= [VOUT
+1]V+1Vp-pA
C		IOUT=10mA,1k
HZ		70dB

Note :

    1. VOUT (T) :Specified Output Voltage
  • 2.VOUT (E) :Effective Output Voltage ( le. The output voltage when "VOUT (T)+1.0V"is provided at the Vin pin while maintaining a certain Iout value.)
  • 3.VDIF:VIN1 –VOUT (E)'

VIN1 :The input voltage when VOUT(E)' appears as input voltage is gradually decreased.

VOUT (E)'=A voltage equal to 98% of the output voltage whenever an amply stabilized Iout {VOUT (T)+1.0V} is input.

V14 www.microne.com.cn Page 11 of 20

Type Characteristics

(1)Output CurrentVS.Output Voltage(VIN=Vout+1, Ta = 25 °C) ME6211C33M5G ME6211C30M5G

0 100 200 300 400 500 600 Output Current(mA)

ME6211C28M5G

ME6211C18M5G

(2)Input VoltageVS.Output Voltage(Ta = 25 °C) ME6211C33M5G ME6211C30M5G

Input Voltage VS.Output Voltage 1.2 1.6 2 2.4 2.8 3.2 1.5 2.5 3.5 4.5 5.5 6.5 Input Voltage(V) Output Voltage(V) 100mA 50mA 1mA

ME6211C28M5G ME6211C18M5G

(3)Output Current VS.Droput Voltage(VIN=Vout+1V,Ta = 25 °C)

ME6211C33M5G ME6211C30M5G

ME6211C28M5G ME6211C18M5G

(4)Input Voltage VS. Supply Current(Ta = 25 °C)

ME6211C33M5G ME6211C30M5G

ME6211C28M5G ME6211C18M5G

Packaging Information

● SOT23-3

MillimetersInches
DIMMinMaxMin
A2.73.10.1063
B1.72.10.0669
b0.350.50.0138
C1.01.20.0394
c0.10.250.0039
d0.2-0.0079
E2.63.00.1023
e1.51.80.059

● SOT89-3

MillimetersInches
DIMMinMaxMinMax
A1.41.60.05510.0630
A11.41.60.05510.0630
a0.360.480.01420.0189
b0.410.530.01610.0209
c0.360.480.01420.0189
d1.41.750.05510.0689
B0.380.430.0150.0169
C1.41.60.05510.0630
D4.44.60.17320.181
E-4.25-0.1673
e2.42.60.09450.1023
L10.4-0.0157-
L20.8-0.0315-

● SOT23-5

MillimetersInches
DIMMinMaxMinMax
A0.91.450.03540.0570
A100.1500.0059
A20.91.30.03540.0511
B0.20.50.00780.0196
C0.090.260.00350.0102
D2.73.100.10620.1220
E2.23.20.08660.1181
E11.301.800.05110.0708
e0.95REF0.0374REF
e11.90REF0.0748REF
L0.100.600.00390.0236
0
a		0
0		3000
0		300

● SOT353

MillimetersInches
DIMMinMaxMin
A0.91.10.035
A10.00.100.00
A20.91.00.035
B0.150.350.006
C0.080.150.003
D2.02.20.079
E2.152.450.085
E11.151.350.045
e0.65REF0.026
e11.201.40.047
L0.260.460.01
0
a		0
0		0
8		0
0

● DFN2*2-6L

Dimension (mm)
DIMMin
A0.70
A10.00
A2
b0.20
D1.95
D11.20
E1.95
E10.70
e
L0.30
K0.20 min
N6
aaa0.08
bbb
V14 www.microne.com.cn Page 19 of 20

  • The information described herein is subject to change without notice.
  • Nanjing Micro One Electronics Inc is not responsible for any problems caused by circuits or diagrams described herein whose related industrial properties, patents, or other rights belong to third parties. The application circuit examples explain typical applications of the products, and do not guarantee the success of any specific mass-production design.
  • Use of the information described herein for other purposes and/or reproduction or copying without the express permission of Nanjing Micro One Electronics Inc is strictly prohibited.
  • The products described herein cannot be used as part of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro One Electronics Inc.
  • Although Nanjing Micro One Electronics Inc exerts the greatest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may occur. The user of these products should therefore give thorough consideration to safety design, including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.

V14 www.microne.com.cn Page 20 of 20

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free