LD2985BM31R

Low Dropout Linear Regulator

The LD2985BM31R is a low dropout linear regulator from STMicroelectronics. View the full LD2985BM31R datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

LD2985BM31R shares its datasheet with LD2985BM18R, whose page lists every part number it covers.

Official LD2985BM31R datasheet (PDF) — the source this page was extracted from.

Manufacturer

STMicroelectronics

LD2985BM31R Key Specifications

Parameter	Value
Output Current	up to 150 mA
Output Voltage	3.1V (3.023V to 3.177V at VI = 4.1V)
Dropout Voltage	280 mV typ at 150 mA; 7 mV typ at 1 mA
Quiescent Current	80 µA typ at no load; 2 mA typ at 150 mA load
Output Noise Voltage	30 µVrms (CBYP = 10 nF, 300 Hz to 50 kHz)
Short-Circuit Current	400 mA typ
Inhibit Logic High/Low	2 V min / 0.15 V max
Operating Input Voltage	2.5V to 16V
Minimum Output Capacitor	2.2 µF ceramic for 1.8-3.3V versions
Supply Voltage Rejection	45 dB typ at 1 kHz
Absolute Max Input Voltage	-0.3V to 16V
Shutdown Quiescent Current	<1 µA (2 µA max over temperature)
Thermal Resistance Junction-Ambient	255 °C/W
Operating Junction Temperature Range	-40°C to 125°C

LD2985BM31R Overview

Part: LD2985 — STMicroelectronics

Type: Fixed Output Voltage Regulator (LDO)

Description: A 150 mA fixed output voltage regulator with very low dropout voltage (280 mV at 150 mA load) and low quiescent current (80 μA typ. at no load), featuring logic controlled electronic shutdown and low output noise voltage (30 μVrms).

Operating Conditions:

Supply voltage: 2.5–16 V
Operating temperature: -40 to 125 °C
Output voltage: 1.8, 2.5, 2.8, 3, 3.1, 3.3, 5 V

Absolute Maximum Ratings:

Max supply voltage: 16 V
Max continuous current: Internally limited
Max storage temperature: 150 °C
Max operating junction temperature: 125 °C

Key Specs:

Dropout voltage: 280 mV (typ. at 150 mA)
Quiescent current: 80 μA (typ. at I O = 0)
Output noise voltage: 30 μVrms (typ. B = 300 Hz to 50 kHz, C BYP = 0.01 μF, C O = 10 μF)
Load regulation: 20 mV (max. I O = 1 to 150 mA, T J = -40 to 125 °C)
Line regulation: 0.003 %/V I (typ. V I = V O + 1 V to 16 V, I O = 1 mA)
Short-circuit current: 400 mA (typ. R L = 0)
Inhibit input logic low: 0.15 V (max. T J = -40 to 125 °C)

Features:

Very low dropout voltage (280 mV at 150 mA and 7 mV at 1 mA load)
Very low quiescent current (2 mA typ. at 150 mA load and 80 μA at no load)
Output current up to 150 mA
Logic controlled electronic shutdown
Output voltage of 1.8, 2.5, 2.8, 3, 3.1, 3.3, 5 V
Internal current and thermal limit
Low output noise voltage 30 μVrms
Small package SOT23-5L
Temperature range: - 40 °C to 125 °C

Applications:

Cellular phone
Palmtop laptop computer
Personal digital assistant (PDA)
Personal stereo
Camcorder and camera

Package:

SOT23-5L

LD2985BM31R Features

Very low dropout voltage (280 mV at 150 mA and 7 mV at 1 mA load)
Very low quiescent current (2 mA typ. at 150 mA load and 80 μA at no load)
Output current up to 150 mA
Logic controlled electronic shutdown
Output voltage of 1.8, 2.5, 2.8, 3, 3.1, 3.3, 5 V
Internal current and thermal limit
Low output noise voltage 30 μVrms
Small package SOT23-5L
Temperature range: - 40 °C to 125 °C

LD2985BM31R Pin Configuration

Figure 2. Pin connections (top view)

Table 2. Pin description

Pin n°	Symbol	Name and function
1	IN	Input port
2	GND	Ground pin
3	INHIBIT	Control switch ON/OFF. Inhibit is not internally pulled-up; it cannot be left floating. Disable the device when connected to GND or to a positive voltage less than 0.18 V
4	Bypass	Bypass pin: capacitor to be connected to GND in order to improve the thermal noise performance
5	OUT	Output port

Table 3. Thermal data

Symbol	Parameter	Value	Unit
R thJC	Thermal resistance junction-case	81	°C/W
R thJA	Thermal resistance junction-ambient	255	°C/W

Table 3. Thermal data

LD2985BM31R Electrical Characteristics

T J = 25 °C, V I = V O + 1 V, I O = 50 mA, V INH = 2 V, C I = C O = 1 μF, unless otherwise specified.

Table 5. Electrical characteristics

Symbol	Parameter	Test conditions	Min.	Typ.	Max.	Unit
V OP	Operating input voltage		2.5		16	V
V O	Output voltage	V I = 2.8 V	1.755	1.8	1.845	V
V O	Output voltage	I O = 1 to 150 mA	1.746		1.854	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	1.728		1.872	V
V O	Output voltage	V I = 3.5 V	2.437	2.5	2.562	V
V O	Output voltage	I O = 1 to 150 mA	2.425		2.575	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	2.4		2.6	V
V O	Output voltage	V I = 3.8 V	2.73	2.8	2.87	V
V O	Output voltage	I O = 1 to 150 mA	2.716		2.884	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	2.688		2.912	V
V O	Output voltage	V I = 4.0 V	2.925	3	3.075	V
V O	Output voltage	I O = 1 to 150 mA	2.91		3.09	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	2.88		3.12	V
V O	Output voltage	V I = 4.1 V	3.023	3.1	3.177	V
V O	Output voltage	I O = 1 to 150 mA	3.007		3.193	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	2.976		3.224	V
V O	Output voltage	V I = 4.3 V	3.218	3.3	3.382	V
V O	Output voltage	I O = 1 to 150 mA	3.201		3.399	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	3.168		3.432	V
V O	Load regulation	I O = 1 to 150 mA, T J = -40 to 125 °C			20	mV
V O	Output voltage	V I = 6.0 V	4.875	5	5.125	V
V O	Output voltage	I O = 1 to 150 mA	4.85		5.15	V
V O	Output voltage	I O = 1 to 150 mA, T J = -40 to 125 °C	4.8		5.2	V
I SC	Short-circuit current	R L = 0		400		mA
∆ V O / ∆ V I	Line regulation	V I = V O + 1 V to 16 V, I O = 1 mA		0.003	0.014	%/V I
∆ V O / ∆ V I	Line regulation	V I = V O + 1 V to 16 V, I O = 1 mA, T J = -40 to 125 °C			0.032	%/V I

Table 5. Electrical characteristics

Table 5. Electrical characteristics (continued)

Symbol	Parameter	Test conditions	Min.	Typ.	Max.	Unit
V DROP	Dropout voltage	I O = 0		1	3	mV
V DROP		I O = 0, T J = -40 to 125 °C			5	mV
V DROP		I O = 1 mA		7	10	mV
V DROP		I O = 1 mA, T J = -40 to 125 °C			15	mV
V DROP		I O = 10 mA		40	60	mV
V DROP		I O = 10 mA, T J = -40 to 125 °C			90	mV
V DROP		I O = 50 mA		120	150	mV
V DROP		I O = 50 mA, T J = -40 to 125 °C			225	mV
V DROP		I O = 150 mA		280	350	mV
V DROP		I O = 150 mA, T J = -40 to 125 °C			575	mV
I Q		I O = 0		80	100	μA
I Q		I O = 0, T J = -40 to 125 °C			150	μA
I Q		I O = 1 mA		100	150	μA
I Q		I O = 1 mA, T J = -40 to 125 °C			200	μA
I Q	Quiescent current	I O = 10 mA		200	300	μA
I Q	ON MODE	I O = 10 mA, T J = -40 to 125 °C			400	μA
I Q		I O = 50 mA		600	900	μA
I Q		I O = 50 mA, T J = -40 to 125 °C			1200	μA
I Q		I O = 150 mA		2000	3000	μA
I Q		I O = 150 mA, T J = -40 to 125 °C			4000	μA
	OFF MODE	V INH <0.18 V		0		μA
	OFF MODE	V INH <0.18 V, T J = -40 to 125 °C			2	μA
SVR	Supply voltage rejection	C BYP = 0.01 μF, C O = 10 μF, f = 1 kHz		45		dB
V IL	Inhibit input logic low	T J = -40 to 125 °C			0.15	V
V IH	Inhibit input logic high	T J = -40 to 125 °C	2			V
I INH	Inhibit input current	V INH = 0 V, T J = -40 to 125 °C		5	15	μA
I INH		V INH = 5 V, T J = -40 to 125 °C		0	-1	μA
e N	Output noise voltage	B = 300 Hz to 50 kHz, C BYP = 0.01 μF, C O = 10 μF		30		μV

Table 5. Electrical characteristics (continued)

LD2985BM31R Absolute Maximum Ratings

Table 4. Absolute maximum ratings

Symbol	Parameter	Value	Unit
V I	DC input voltage	-0.3 to 16	V
V INH	INHIBIT input voltage	-0.3 to 16	V
I O	Output current	Internally limited
P D	Power dissipation	Internally limited
T STG	Storage temperature range	-65 to 150	°C
T OP	Operating junction temperature range	-40 to 125	°C

Note: Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied.

Table 4. Absolute maximum ratings

LD2985BM31R Package Information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

Figure 18. SOT23-5L package outline

Table 6. SOT23-5L mechanical data

Dim.	mm	mm	mm
Dim.	Min.	Typ.	Max.
A	0.90		1.45
A1	0		0.15
A2	0.90		1.30
b	0.30		0.50
c	0.09		0.20
D		2.95
E		1.60
e		0.95
H		2.80
L	0.30		0.60
θ	0		8

Figure 19. SOT23-5L package outlineSOT23-5L recommended footprint (dimensions in mm)

Table 6. SOT23-5L mechanical data

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part Number	Manufacturer	Package
LD2985BM18R	STMicroelectronics	SOT-23-5
LD2985BM25R	STMicroelectronics	SOT23-5L
LD2985BM28R	STMicroelectronics	SOT23-5
LD2985BM30R	STMicroelectronics	SOT23-5

Other Linear Regulators (LDO)

LP5907MFX-3.3/NOPB – Texas Instruments, Low-Noise, Low-IQ LDO
AP7343D-30FS4-7B – Diodes Incorporated, 300mA High PSRR Low-Noise LDO
MC78M12ACDTRKG – onsemi, Positive Voltage Regulator
LM317 – Texas Instruments, Adjustable Regulator
ME6211C33M5G-N – Nanjing Micro One, High PSRR Low-Noise CMOS LDO Regulator
R1191L – Nisshinbo, LDO Regulator
AAT3221IGV-3.3-T1 – Skyworks Solutions, LDO Linear Regulator
AMS1117 – Advanced Monolithic Systems, Low Dropout Voltage Regulator

All Linear Regulators (LDO) datasheets All STMicroelectronics datasheets (808)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the LD2985BM31R

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the LD2985BM31R run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.