DAC8562EP
Digital-to-Analog Converter (DAC)The DAC8562EP is a digital-to-analog converter (dac) from Analog Devices. View the full DAC8562EP datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
DAC8562EP shares its datasheet with DAC8562S, whose page lists every part number it covers.
Official DAC8562EP datasheet (PDF) — the source this page was extracted from.
DAC8562EP Key Specifications
| Parameter | Value |
|---|---|
| Resolution | 12 Bits |
| Settling Time | 16 µs (Typ) |
| Output Current Drive | 5 mA |
| Output Voltage Range | 0V to 4.095V |
| Supply Voltage Range | 4.75V to 5.25V |
| Max Power Dissipation | 30 mW |
| Typical Supply Current | 3 mA |
| Communication Interface | Parallel |
| Internal Reference Voltage | 2.5V (Typ) |
| Operating Temperature Range | -40°C to +85°C |
| Package Thermal Resistance Dip20 | 74 °C/W |
| Package Thermal Resistance Soic20 | 89 °C/W |
DAC8562EP Overview
Part: DAC8562 — Analog Devices
Type: Complete 12-Bit Voltage Output DAC
Description: Complete single +5 V parallel input 12-bit DAC with integrated rail-to-rail output amplifier, internal 2.5 V reference, and 0 to 4.095 V true voltage output driving up to 5 mA.
Operating Conditions:
- Supply voltage: 4.75 to 5.25 V (+5 V ± 5%)
- Operating temperature: -40 to +85 °C
- Resolution: 12 bits (1 mV/LSB)
Absolute Maximum Ratings:
- Max supply voltage: -0.3 V to +10 V (VDD to DGND and AGND)
- Max continuous current: 50 mA (IOUT Short Circuit to GND)
- Max junction/storage temperature: 150 °C (TJ max), -65 to +150 °C (storage)
Key Specs:
- Relative accuracy (INL): ±0.5 LSB max (E Grade), ±1 LSB max (F Grade)
- Differential nonlinearity (DNL): ±1 LSB max (No Missing Codes)
- Full-scale voltage (VFS): 4.087 V min, 4.095 V typ, 4.103 V max (E Grade)
- Reference output voltage (VREF): 2.484 V min, 2.500 V typ, 2.516 V max
- Output current (IOUT): 5 mA min, 7 mA typ (Data = 800H)
- Voltage output settling time (tS): 16 μs typ (to ±1 LSB of final value)
- Positive supply current (IDD): 0.6 mA typ, 1 mA max (VIL = 0 V, VDD = +5 V); 3 mA typ, 6 mA max (VIH = 2.4 V, VIL = 0.8 V)
- Logic input high voltage (VIH): 2.4 V min; Logic input low voltage (VIL): 0.8 V max
Features:
- Complete 12-bit DAC with no external components needed
- Single +5 V supply operation with rail-to-rail output swing (0 V to 4.095 V)
- Integrated trimmed 2.5 V bandgap reference and output amplifier
- High-speed parallel digital interface with asynchronous clear (CLR) pin
- Low power consumption (~3 mW at VIL = 0 V)
Applications:
- Digitally controlled calibration
- Servo controls
- Process control equipment
- PC peripherals
Package:
- 20-pin Plastic DIP (N-20)
- 20-lead SOIC / SOL-20 (R-20)
- Dice (DAC8562GBC)
DAC8562EP Pin Configuration
NC = NO CONNECT
DAC8562EP Electrical Characteristics
| Parameter | Symbol | Condition | Min | Typ | Max | Units |
|---|---|---|---|---|---|---|
| STATIC PERFORMANCE | ||||||
| Resolution | N | Note 2 | 12 | Bits | ||
| Relative Accuracy | INL | E Grade | -1/2 | - 1/4 | +1/2 | LSB |
| F Grade | -1 | - 3/4 | +1 | LSB | ||
| Differential Nonlinearity | DNL | No Missing Codes | -1 | - 3/4 | +1 | LSB |
| Zero-Scale Error | V ZSE | Data = 000 H | +1/2 | +3 | LSB | |
| Full-Scale Voltage | V FS | Data - FFF H 3 | ||||
| E Grade | 4.087 | 4.095 | 4.103 | V | ||
| F Grade | 4.079 | 4.095 | 4.111 | V | ||
| Full-Scale Tempco | TCV FS | Notes 3, 4 | - 16 | ppm/ C | ||
| ANALOG OUTPUT | ||||||
| Output Current | I OUT | Data = 800 | - 5 | - 7 | mA | |
| Load Regulation at Half Scale | LD REG | H R L = 402 W to ¥ , Data = 800 | 1 | 3 | LSB | |
| Capacitive Load | C L | No Oscillation 4 | 500 | pF | ||
| REFERENCE OUTPUT | ||||||
| Output Voltage | V REF | 2.484 | 2.500 | 2.516 | V | |
| Output Source Current | I REF | Note 5 | 5 | 7 | mA | |
| Line Rejection | LN REJ | 0.08 | %/V | |||
| Load Regulation | LD REG | I REF = 0 to 5 mA | 0.1 | %/mA | ||
| LOGIC INPUTS | ||||||
| Logic Input Low Voltage | V IL | 0.8 | V | |||
| Logic Input High Voltage | V IH | 2.4 | V | |||
| Input Leakage Current | I IL | 10 | m A | |||
| Input Capacitance | C IL | Note 4 | 10 | pF | ||
| INTERFACE TIMING SPECIFICATIONS 1, 4 | ||||||
| Chip Enable Pulse Width | t CEW | 30 | ns | |||
| Data Setup | t DS | 30 | ns | |||
| Data Hold | t DH | 10 | ns | |||
| Clear Pulse Width | t CLRW | 20 | ns | |||
| AC CHARACTERISTICS 4 | ||||||
| Voltage Output Settling Time 6 | t S | To - 1 LSB of Final Value | 16 | m s | ||
| Digital Feedthrough | 35 | nV sec | ||||
| SUPPLY CHARACTERISTICS | ||||||
| Positive Supply Current | I DD | V IH = 2.4 V, V IL = 0.8 V | 3 | 6 | mA | |
| Power Dissipation | P DISS | V IL = 0 V, V DD = +5 V V IH = 2.4 V, V IL = 0.8 V V = 0 V, V = +5V | 0.6 15 | 1 30 | mA mW | |
| Power Supply Sensitivity | PSS | IL DD D V DD = - 5% | 3 0.002 | 5 0.004 | mW %/% |
DAC8562EP Absolute Maximum Ratings
| V DD to DGND and AGND . . . . . . . . . . . | . . . . . -0.3 V, +10 V |
|---|---|
| Logic Inputs to DGND . . . . . . . . . . . . . . | .-0.3 V, V DD + 0.3 V |
| V OUT to AGND . . . . . . . . . . . . . . . . . . . . | .-0.3 V, V DD + 0.3 V |
| V REFOUT to AGND . . . . . . . . . . . . . . . . . | .-0.3 V, V DD + 0.3 V |
| AGND to DGND . . . . . . . . . . . . . . . . . . | . . . . . . . -0.3 V, V DD |
| I OUT Short Circuit to GND . . . . . . . . . . . | . . . . . . . . . . . 50 mA |
| Package Power Dissipation . . . . . . . . . . . | . . .(T J max - T A )/ u JA |
| Thermal Resistance u JA 20-Pin Plastic DIP Package (P) . . . . . . | . . . . . . . . . . 74 C/W |
| 20-Lead SOIC Package (S) . . . . . . . . . | . . . . . . . . . . 89 C/W |
| Maximum Junction Temperature (T J max) | . . . . . . . . . . 150 C |
| Operating Temperature Range . . . . . . . . . | . . . .-40 C to +85 C |
| Storage Temperature Range . . . . . . . . . . | . . . -65 C to +150 C |
| Lead Temperature (Soldering, 10 secs) . . | . . . . . . . . . . +300 C |
*Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| DAC8562 | Texas Instruments | 20-Pin Plastic DIP |
| DAC8562/883 | Analog Devices | 20-Pin Plastic DIP |
| DAC8562FP | Analog Devices | PDIP-20 |
| DAC8562FS | Analog Devices | SOIC-20 |
| DAC8562GBC | Analog Devices | Die |
| DAC8562S | Analog Devices | SOIC-20 |
Other ADC / DAC
- ADS1115 – Texas Instruments, Analog-to-Digital Converter
- PCM1865DBTR – Texas Instruments, Audio ADC
- AD5065 – Analog Devices, Digital-to-Analog Converter
- AD5671R – Analog Devices, Digital-to-Analog Converter (DAC)
- AD5675R – Analog Devices, Digital-to-Analog Converter (DAC)
- AD5675RACPZ-REEL7 – Analog Devices, Digital-to-Analog Converter (DAC)
- AD5675RACPZ-RL – Analog Devices, Digital-to-Analog Converter (DAC)
- AD5675RARUZ – Analog Devices, Digital-to-Analog Converter (DAC)
Ask your AI agent about the DAC8562EP
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the DAC8562EP run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.