Texas Instruments Datasheets

2,418 Texas Instruments datasheets read into specs, pinouts and ratings, including Integrated Circuits, Switching Regulators (Buck) and Operational Amplifiers.

Texas Instruments datasheets, page 61

2,418 parts · page 61 of 81. Most used first, then by part number.

TLV75533PDQNT

Texas Instruments

LDO Voltage Regulators 500-mA high-PSRR low -IQ low-dropout vol A 595-TLV75533PDQNR

Low-Dropout Regulator4-XDFN Exposed Pad

TLV75533PDQNT.A

Texas Instruments

Ultra-small, low quiescent current, low-dropout regulator (LDO) that sources 500mA with good line and load transient performance, supporting an input voltage range from 1.45V to 5.5V and fixed output voltages from 0.6V to

Low-Dropout RegulatorX2SON-4 1x1mm

TLV75533PDRVR

Texas Instruments

LDO Voltage Regulators 500-mA high-PSRR low -IQ low-dropout vol

Low-Dropout Regulator6-WDFN Exposed Pad

TLV75533PDRVR.A

Texas Instruments

3.3V fixed-output, 500mA low quiescent current LDO with 1.45V to 5.5V input, soft-start, foldback current limit, and active output discharge

Low-Dropout RegulatorWSON-6 2x2mm

TLV75533PDYDR

Texas Instruments

IC REG LINEAR 3.3V 0.5A SOT23-5

Low-Dropout RegulatorSC-74A, SOT-753

TLV75533PDYDR.A

Texas Instruments

Fixed 3.3V, 500mA low-dropout linear regulator with 25µA typical quiescent current, soft-start, foldback current limit, and active output discharge in a thermally enhanced SOT-23-5 package

Low-Dropout RegulatorSOT-23-5

TLV755P

Texas Instruments

500mA low-dropout linear regulator with 1.45V to 5.5V input, fixed 0.6V to 5V outputs, 25μA typical quiescent current, active output discharge, and foldback current limit.

Low-Dropout Regulator

TLV9001

Texas Instruments

Single-channel, low-voltage (1.8V to 5.5V) rail-to-rail input/output CMOS op amp with 1 MHz unity-gain bandwidth and 60 µA quiescent current, from the TLV900x family

Operational Amplifier

TLV9001IDBVR

Texas Instruments

Low-power, rail-to-rail input/output (RRIO) operational amplifier with 1MHz bandwidth for cost-sensitive, low-voltage applications.

Operational AmplifierSOT-23 (5)

TLV9001IDCKR

Texas Instruments

Single-channel, low-power, 1MHz rail-to-rail input/output CMOS operational amplifier for cost-sensitive 1.8V to 5.5V systems with integrated RFI/EMI filters

Operational AmplifierSC70-5

TLV9001IDPWR

Texas Instruments

Single-channel low-power, rail-to-rail input/output, 1MHz CMOS operational amplifier for cost-sensitive 1.8V to 5.5V systems with integrated RFI/EMI filters.

Operational AmplifierX2SON-5

TLV9001S

Texas Instruments

Single-channel, 1.8V to 5.5V, 1-MHz rail-to-rail input/output CMOS op amp with shutdown mode, internal RFI/EMI filter, for cost-sensitive systems

Operational Amplifier

TLV9001SIDCK

Texas Instruments

Single-channel, 1.8V to 5.5V low-power rail-to-rail input/output CMOS operational amplifier with 1 MHz unity-gain bandwidth and shutdown (SHDN) pin, in a 6-pin SC70 package.

Operational AmplifierSC70-6

TLV9001T

Texas Instruments

Single-channel, low-voltage (1.8 V to 5.5 V) rail-to-rail input/output CMOS op amp with 1 MHz unity-gain bandwidth and 60 µA/channel quiescent current for cost-sensitive systems.

Operational AmplifierSC70-5

TLV9001U

Texas Instruments

Single-channel low-power, rail-to-rail input/output CMOS op amp with 1MHz GBW operating from 1.8V to 5.5V, for cost-sensitive systems

Operational AmplifierSOT-23-5

TLV9002

Texas Instruments

Low-power, 1-MHz dual-channel rail-to-rail input/output CMOS operational amplifier for cost-sensitive 1.8V to 5.5V systems

Operational Amplifier

TLV9002S

Texas Instruments

Dual-channel 1-MHz rail-to-rail input/output CMOS operational amplifier with shutdown mode, operating from 1.8 V to 5.5 V, for cost-sensitive low-power applications.

Operational Amplifier

TLV9004

Texas Instruments

Quad-channel, low-power, rail-to-rail input/output CMOS operational amplifier with 1-MHz unity-gain bandwidth for cost-sensitive 1.8 V to 5.5 V systems

Operational Amplifier

TLV9004S

Texas Instruments

Quad-channel low-power, rail-to-rail input/output, 1-MHz CMOS operational amplifier with per-pair shutdown for cost-sensitive systems

Operational AmplifierWQFN-16 3.00x3.00mm

TLV9061

Texas Instruments

Single, 5.5-V, 10-MHz, RRIO operational amplifier for cost-optimized applications 6-SOT-23 -40 to 125

CMOS Operational AmplifierSOT-23 (5)

TLV9061-Q1

Texas Instruments

Single-channel automotive-qualified (Q1) 10MHz rail-to-rail input/output CMOS operational amplifier operating from 1.8V to 5.5V with low offset voltage and low quiescent current

CMOS Operational Amplifier

TLV9061IDBVR

Texas Instruments

IC CMOS 1 CIRCUIT SOT23-5

CMOS Operational AmplifierSC-74A, SOT-753

TLV9061IDCKR

Texas Instruments

IC CMOS 1 CIRCUIT SC70-5

CMOS Operational Amplifier5-TSSOP, SC-70-5, SOT-353

TLV9061IDPWR

Texas Instruments

IC CMOS 1 CIRCUIT 5X2SON

CMOS Operational Amplifier4-XFDFN Exposed Pad

TLV9061S

Texas Instruments

CMOS Operational AmplifierSOT-23 (6)

TLV9062

Texas Instruments

Dual low-voltage (1.8V to 5.5V) rail-to-rail input/output CMOS op amp with 10MHz unity-gain bandwidth, low offset and 538µA quiescent current per channel for cost-sensitive systems.

Operational Amplifier

TLV9062-Q1

Texas Instruments

TLV9062IDDFR

Texas Instruments

Operational Amplifiers - Op Amps Dual 5.5-V 10-MHz op erational amplifie

TSOT-23-8

TLV9062IDDFR.A

Texas Instruments

TLV9062IDGKR

Texas Instruments

IC CMOS 2 CIRCUIT 8VSSOP

8-TSSOP, 8-MSOP (0.118", 3.00mm Width)