Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

THS4131IDR

Fully-Differential I/O Amplifier

The THS4131IDR is a fully-differential i/o amplifier from Texas Instruments. View the full THS4131IDR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

THS4131IDR shares its datasheet with THS4131, whose page lists every part number it covers.

Official THS4131IDR datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Fully-Differential I/O Amplifier

THS4131IDR Key Specifications

ParameterValue
Small-signal bandwidth (G = 1, RF = 390 Ω, TA = 25 °C)165 MHz at VCC = 5 V, 166 MHz at ±5 V, 170 MHz at ±15 V
Small-signal bandwidth (G = 2, RF = 750 Ω)97 MHz at 5 V, 98 MHz at ±5 V, 100 MHz at ±15 V
Slew rate67 V/μs (VCC = ±5 V, TA = 25 °C)
Settling time (2 V step, G = 1)39 ns to 0.1%, 61 ns to 0.01%
Input-referred voltage noise1.25 nV/√Hz, with a 1/f corner at 350 Hz
Common-mode rejection95 dB at 800 kHz
Shutdown quiescent current860 μA (THS4130)
ESD±2500 V HBM, ±1500 V CDM

THS4131IDR Overview

Part: THS4130 / THS4131 — Texas Instruments

Type: High-Speed, Low-Noise, Fully-Differential I/O Amplifier

Description: Fully differential input/output amplifier with 170 MHz bandwidth (G = 1 V/V, VCC = ±15 V), 51 V/μs slew rate, -102 dBc THD at 2 VPP, 250 kHz, and 5 V to 30 V single-supply operation.

Operating Conditions:

  • Supply voltage: ±2.5 V to ±15 V dual supply; 5 V to 30 V single supply
  • Operating temperature: -40 to 85 °C (I-suffix); 0 to 70 °C (C-suffix)
  • Gain-bandwidth product: 215 MHz

Absolute Maximum Ratings:

  • Max supply voltage (VCC- to VCC+): 33 V
  • Max output current: 150 mA
  • Max junction temperature: 150 °C (125 °C for continuous operation, long-term reliability)
  • Storage temperature: -65 to 150 °C
  • Differential input voltage: ±1.5 V
  • Continuous input current: 10 mA

Key Specs:

  • Small-signal bandwidth (G = 1, RF = 390 Ω, TA = 25 °C): 165 MHz at VCC = 5 V, 166 MHz at ±5 V, 170 MHz at ±15 V
  • Small-signal bandwidth (G = 2, RF = 750 Ω): 97 MHz at 5 V, 98 MHz at ±5 V, 100 MHz at ±15 V
  • Slew rate: 67 V/μs (VCC = ±5 V, TA = 25 °C)
  • Settling time (2 V step, G = 1): 39 ns to 0.1%, 61 ns to 0.01%
  • Input-referred voltage noise: 1.25 nV/√Hz, with a 1/f corner at 350 Hz
  • Common-mode rejection: 95 dB at 800 kHz
  • Shutdown quiescent current: 860 μA (THS4130)
  • ESD: ±2500 V HBM, ±1500 V CDM

Features:

  • True fully differential signal path from input to output
  • Supply capability up to ±15 V
  • Power-down pin on THS4130 (active low)
  • Low distortion: -102 dBc THD at 2 VPP, 250 kHz
  • Low noise with a 350 Hz 1/f corner

Applications:

  • Single-ended to differential conversion
  • Differential ADC driver
  • Differential antialiasing
  • Differential transmitter and receiver
  • Output level shifter
  • Medical ultrasound

Package:

  • D (SOIC-8)
  • DGK (VSSOP-8)
  • DGN (HVSSOP-8, with thermal pad)

THS4131IDR Features

  • High performance
  • -Bandwidth: 170 MHz (VCC = ±15 V, G = 1 V/V)
  • -Slew rate: 51 V/μs
  • -Gain bandwidth product: 215 MHz
  • -Distortion: -102 dBc THD at 2 VPP, 250 kHz
  • Voltage noise
  • -1/f voltage noise corner: 350 Hz
  • -1.25 nV/√Hz input-referred noise
  • Single supply operating range: 5 V to 30 V
  • Quiescent current (shutdown): 860 μA (THS4130)
  • Temperature range: -40°C to +85°C
  • Packages: PowerPAD ™ HVSSOP-8, SOIC-8, VSSOP-8

THS4131IDR Applications

  • Single-ended to differential conversion
  • Differential ADC driver
  • Differential antialiasing
  • Differential transmitter and receiver
  • Output level shifter
  • Medical ultrasound

Time Gain Control DAC Reference for Ultrasound

THS4131IDR Pin Configuration

Figure 6-1. D Package, 8-Pin SOIC, DGK Package, 8-pin VSSOP, DGN Package, 8-Pin HVSSOP THS4130 (Top View)

Figure 6-2. D Package, 8-Pin SOIC, DGK Package, 8-pin VSSOP, DGN Package, 8-Pin HVSSOP THS4131 (Top View)

Figure 6-1. D Package, 8-Pin SOIC, DGK Package, 8-pin VSSOP, DGN Package, 8-Pin HVSSOP THS4130 (Top View)

THS4131IDR Electrical Characteristics

at V CC = ±5 V, gain = 1 V/V, R F = 390 Ω, RL = 800 Ω, and TA = +25°C (unless otherwise noted)

PARAMETERPARAMETERTEST CONDITIONSMINTYPMAXUNIT
DYNAMIC PERFORMANCEDYNAMIC PERFORMANCEDYNAMIC PERFORMANCEDYNAMIC PERFORMANCEDYNAMIC PERFORMANCEDYNAMIC PERFORMANCEDYNAMIC PERFORMANCEDYNAMIC PERFORMANCE
SSBWSmall-signal bandwidth (-3 dB)V I = 63 mV PP , gain = 1, R F = 390 Ω, single-ended input, differential outputV CC = 5 V165MHz
SSBWSmall-signal bandwidth (-3 dB)V I = 63 mV PP , gain = 1, R F = 390 Ω, single-ended input, differential outputV CC = ±5 V166MHz
SSBWSmall-signal bandwidth (-3 dB)V I = 63 mV PP , gain = 1, R F = 390 Ω, single-ended input, differential outputV CC = ±15 V170MHz
SSBWSmall-signal bandwidth (-3 dB)V I = 63 mV PP , gain = 2, R F = 750 Ω, single-ended input, differential outputV CC = 5 V97MHz
SSBWSmall-signal bandwidth (-3 dB)V I = 63 mV PP , gain = 2, R F = 750 Ω, single-ended input, differential outputV CC = ±5 V98MHz
SSBWSmall-signal bandwidth (-3 dB)V I = 63 mV PP , gain = 2, R F = 750 Ω, single-ended input, differential outputV CC = ±15 V100MHz
SRSlew rate (2)67V/μs
t sSettling timeTo 0.1%Step voltage = 2 V, gain = 139ns
t sSettling timeTo 0.01%Step voltage = 2 V, gain = 161ns
DISTORTION PERFORMANCEDISTORTION PERFORMANCEDISTORTION PERFORMANCEDISTORTION PERFORMANCEDISTORTION PERFORMANCEDISTORTION PERFORMANCEDISTORTION PERFORMANCEDISTORTION PERFORMANCE
THDTotal harmonic distortionV CC = 5 V, V O = 2 V PP , differential input/outputf = 250 kHz-101dBc
THDTotal harmonic distortionV CC = 5 V, V O = 2 V PP , differential input/outputf = 1 MHz-87dBc
THDTotal harmonic distortionV CC = ±5 V, V O = 2 V PP , differential input/outputf = 250 kHz-100dBc
THDTotal harmonic distortionV CC = ±5 V, V O = 2 V PP , differential input/outputf = 1 MHz-87dBc
THDTotal harmonic distortionV CC = ±15 V, V O = 2 V PP , differential input/outputf = 250 kHz-102dBc
THDTotal harmonic distortionV CC = ±15 V, V O = 2 V PP , differential input/outputf = 1 MHz-88dBc
THDTotal harmonic distortionV CC = ±5 V, V O = 4 V PP , differential input/outputf = 250 kHz-94dBc
THDTotal harmonic distortionV CC = ±5 V, V O = 4 V PP , differential input/outputf = 1 MHz-79dBc
THDTotal harmonic distortionV CC = ±15 V, V O = 4 V PP , differential input/outputf = 250 kHz-95dBc
THDTotal harmonic distortionV CC = ±15 V, V O = 4 V PP , differential input/outputf = 1 MHz-80dBc
SFDRSpurious-free dynamic rangeV O = 2 V PP , f = 250 kHz, differential input/outputV CC = ±2.5103dBc
SFDRSpurious-free dynamic rangeV O = 2 V PP , f = 250 kHz, differential input/outputV CC = ±5106dBc
SFDRSpurious-free dynamic rangeV O = 2 V PP , f = 250 kHz, differential input/outputV CC = ±15108dBc
SFDRSpurious-free dynamic rangeV O = 4 V PP , f = 250 kHz, differential input/outputV CC = ±598dBc
SFDRSpurious-free dynamic rangeV O = 4 V PP , f = 250 kHz, differential input/outputV CC = ±15100dBc
IMD3Third intermodulation distortionV I(PP) = 4 V, F 1 = 3 MHz, F 2 = 3.5 MHzV I(PP) = 4 V, F 1 = 3 MHz, F 2 = 3.5 MHz-53dBc
OIP3Third-order interceptV I(PP) = 4 V, F 1 = 3 MHz, F 2 = 3.5 MHzV I(PP) = 4 V, F 1 = 3 MHz, F 2 = 3.5 MHz41.5dB
NOISE PERFORMANCENOISE PERFORMANCENOISE PERFORMANCENOISE PERFORMANCENOISE PERFORMANCENOISE PERFORMANCENOISE PERFORMANCENOISE PERFORMANCE
V nInput voltage noisef = 10 kHz1.25nV/√Hz
I nInput current noisef = 10 kHz1.7pA/√Hz
DC PERFORMANCEDC PERFORMANCEDC PERFORMANCEDC PERFORMANCEDC PERFORMANCEDC PERFORMANCEDC PERFORMANCEDC PERFORMANCE
A OLOpen-loop gainT A = 25°C7178dB
A OLOpen-loop gainT A = full range69dB
V OSInput offset voltageT A = 25°C±0.22mV
V OSInput offset voltageT A = full range (1)3
Common-mode input offset voltage Input offset voltage driftReferred to V OCM T A = full range (1)0.2 25.5mV μV/°C
I IBInput bias currentT A = full range (1)515.4μA
I OSInput offset current
Input offset current drift
T A = full range (1)100
1
500nA
nA/°C
INPUT CHARACTERISTICSINPUT CHARACTERISTICSINPUT CHARACTERISTICSINPUT CHARACTERISTICSINPUT CHARACTERISTICSINPUT CHARACTERISTICSINPUT CHARACTERISTICSINPUT CHARACTERISTICS

THS4131IDR Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
V IInput voltage-V CC+V CCV
V CC- to V CC+Supply voltage33V
Supply turn on and turn off dV/dT (2)1.7V/μs
I OOutput current (3)150mA
V IDDifferential input voltage-1.51.5V
I INContinuous input current10mA
T JJunction temperature150°C
T JJunction temperature, continuous operation, long-term reliability (4)125°C
T AAmbient temperature C-suffix070°C
T AI-suffix-4085°C
T stgStorage temperature-65150°C
  • (1) Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute maximum ratings do not imply functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions. If briefly operating outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not sustain damage, but it may not be fully functional. Operating the device in this manner may affect device reliability, functionality, performance, and shorten the device lifetime.
  • (2) Stay below this specification to make sure that the edge-triggered ESD absorption devices across the supply pins remain off.
  • (3) Some of the THS413x packages incorporate a thermal pad on the underside of the chip. This thermal pad acts as a heat sink and must be connected to a thermally dissipative plane for proper power dissipation. Failure to do so can result in exceeding the maximum junction temperature which can permanently damage the device. See TI technical briefs SLMA002 and SLMA004 for more information about using the PowerPAD integrated circuit package.
  • (4) The maximum junction temperature for continuous operation is limited by package constraints. Operation greater than this temperature can result in reduced reliability, reduced lifetime of the device, or both.

over operating free-air temperature range (unless otherwise noted)

MINNOMMAXUNIT
V CCSupply voltageDual supply Single supply±2.5±15 30V
T AOperating free-air temperatureC-suffix device I-suffix device5 0 -4070 85°C

THS4131IDR Thermal Information

THERMAL METRIC (1)THERMAL METRIC (1)THS413x - D (SOIC) - 8 PINSTHS413x - DGK (VSSOP) - 8 PINSTHS413x - DGN (HVSSOP) - 8 PINSUNIT
R θJAJunction-to-ambient thermal resistance126.3147.357.6°C/W
R θJC(top)Junction-to-case (top) thermal resistance67.337.976.3°C/W
R θJBJunction-to-board thermal resistance69.883.230.0°C/W
ψ JTJunction-to-top characterization parameter19.50.94.0°C/W
ψ JBJunction-to-board characterization parameter69.081.629.9°C/W
R θJC(bot)Junction-to-case (bottom) thermal resistanceN/AN/A14.3°C/W
  • (1) For information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

THS4131IDR Typical Application

Figure 9-5. Antialias Filtering

For signal conditioning in ADC applications, make sure to limit the input frequency to the ADC. Low-pass filters can prevent the aliasing of the high-frequency noise with the frequency of operation. This design example shows a method by which the noise can be filtered in the THS413x. Figure 9-5 shows the design example for the THS413x in active low-pass filter topology driving an ADC.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
THS4130Texas Instruments—
THS4131Texas InstrumentsDGK (VSSOP, 8)
THS4131CDTexas Instruments—
THS4131CDGKTexas Instruments—
THS4131CDGKRTexas Instruments—
THS4131CDGNTexas Instruments—
THS4131CDGNRTexas Instruments—
THS4131CDRTexas Instruments—
THS4131IDTexas Instruments—
THS4131IDGKTexas Instruments
THS4131IDGKRTexas Instruments—
THS4131IDGKR.BTexas Instruments—
THS4131IDGNTexas Instruments—
THS4131IDGNRTexas Instruments—
THS4131IDGNR.BTexas Instruments—
THS4131IDR.BTexas Instruments—

More datasheets

All Texas Instruments datasheets (2,554)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the THS4131IDR

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the THS4131IDR run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.