THS4131CDGN
Fully-Differential I/O AmplifierThe THS4131CDGN is a fully-differential i/o amplifier from Texas Instruments. View the full THS4131CDGN datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
THS4131CDGN shares its datasheet with THS4131, whose page lists every part number it covers.
Official THS4131CDGN datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Fully-Differential I/O Amplifier
THS4131CDGN Key Specifications
| Parameter | Value |
|---|---|
| Small-signal bandwidth (G = 1, RF = 390 Ω, TA = 25 °C) | 165 MHz at VCC = 5 V, 166 MHz at ±5 V, 170 MHz at ±15 V |
| Small-signal bandwidth (G = 2, RF = 750 Ω) | 97 MHz at 5 V, 98 MHz at ±5 V, 100 MHz at ±15 V |
| Slew rate | 67 V/μs (VCC = ±5 V, TA = 25 °C) |
| Settling time (2 V step, G = 1) | 39 ns to 0.1%, 61 ns to 0.01% |
| Input-referred voltage noise | 1.25 nV/√Hz, with a 1/f corner at 350 Hz |
| Common-mode rejection | 95 dB at 800 kHz |
| Shutdown quiescent current | 860 μA (THS4130) |
| ESD | ±2500 V HBM, ±1500 V CDM |
THS4131CDGN Overview
Part: THS4130 / THS4131 — Texas Instruments
Type: High-Speed, Low-Noise, Fully-Differential I/O Amplifier
Description: Fully differential input/output amplifier with 170 MHz bandwidth (G = 1 V/V, VCC = ±15 V), 51 V/μs slew rate, -102 dBc THD at 2 VPP, 250 kHz, and 5 V to 30 V single-supply operation.
Operating Conditions:
- Supply voltage: ±2.5 V to ±15 V dual supply; 5 V to 30 V single supply
- Operating temperature: -40 to 85 °C (I-suffix); 0 to 70 °C (C-suffix)
- Gain-bandwidth product: 215 MHz
Absolute Maximum Ratings:
- Max supply voltage (VCC- to VCC+): 33 V
- Max output current: 150 mA
- Max junction temperature: 150 °C (125 °C for continuous operation, long-term reliability)
- Storage temperature: -65 to 150 °C
- Differential input voltage: ±1.5 V
- Continuous input current: 10 mA
Key Specs:
- Small-signal bandwidth (G = 1, RF = 390 Ω, TA = 25 °C): 165 MHz at VCC = 5 V, 166 MHz at ±5 V, 170 MHz at ±15 V
- Small-signal bandwidth (G = 2, RF = 750 Ω): 97 MHz at 5 V, 98 MHz at ±5 V, 100 MHz at ±15 V
- Slew rate: 67 V/μs (VCC = ±5 V, TA = 25 °C)
- Settling time (2 V step, G = 1): 39 ns to 0.1%, 61 ns to 0.01%
- Input-referred voltage noise: 1.25 nV/√Hz, with a 1/f corner at 350 Hz
- Common-mode rejection: 95 dB at 800 kHz
- Shutdown quiescent current: 860 μA (THS4130)
- ESD: ±2500 V HBM, ±1500 V CDM
Features:
- True fully differential signal path from input to output
- Supply capability up to ±15 V
- Power-down pin on THS4130 (active low)
- Low distortion: -102 dBc THD at 2 VPP, 250 kHz
- Low noise with a 350 Hz 1/f corner
Applications:
- Single-ended to differential conversion
- Differential ADC driver
- Differential antialiasing
- Differential transmitter and receiver
- Output level shifter
- Medical ultrasound
Package:
- D (SOIC-8)
- DGK (VSSOP-8)
- DGN (HVSSOP-8, with thermal pad)
THS4131CDGN Features
- High performance
- -Bandwidth: 170 MHz (VCC = ±15 V, G = 1 V/V)
- -Slew rate: 51 V/μs
- -Gain bandwidth product: 215 MHz
- -Distortion: -102 dBc THD at 2 VPP, 250 kHz
- Voltage noise
- -1/f voltage noise corner: 350 Hz
- -1.25 nV/√Hz input-referred noise
- Single supply operating range: 5 V to 30 V
- Quiescent current (shutdown): 860 μA (THS4130)
- Temperature range: -40°C to +85°C
- Packages: PowerPAD ™ HVSSOP-8, SOIC-8, VSSOP-8
THS4131CDGN Applications
- Single-ended to differential conversion
- Differential ADC driver
- Differential antialiasing
- Differential transmitter and receiver
- Output level shifter
- Medical ultrasound
Time Gain Control DAC Reference for Ultrasound
THS4131CDGN Pin Configuration
Figure 6-1. D Package, 8-Pin SOIC, DGK Package, 8-pin VSSOP, DGN Package, 8-Pin HVSSOP THS4130 (Top View)
Figure 6-2. D Package, 8-Pin SOIC, DGK Package, 8-pin VSSOP, DGN Package, 8-Pin HVSSOP THS4131 (Top View)
Figure 6-1. D Package, 8-Pin SOIC, DGK Package, 8-pin VSSOP, DGN Package, 8-Pin HVSSOP THS4130 (Top View)
THS4131CDGN Electrical Characteristics
at V CC = ±5 V, gain = 1 V/V, R F = 390 Ω, RL = 800 Ω, and TA = +25°C (unless otherwise noted)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|---|
| DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE | DYNAMIC PERFORMANCE |
| SSBW | Small-signal bandwidth (-3 dB) | V I = 63 mV PP , gain = 1, R F = 390 Ω, single-ended input, differential output | V CC = 5 V | 165 | MHz | ||
| SSBW | Small-signal bandwidth (-3 dB) | V I = 63 mV PP , gain = 1, R F = 390 Ω, single-ended input, differential output | V CC = ±5 V | 166 | MHz | ||
| SSBW | Small-signal bandwidth (-3 dB) | V I = 63 mV PP , gain = 1, R F = 390 Ω, single-ended input, differential output | V CC = ±15 V | 170 | MHz | ||
| SSBW | Small-signal bandwidth (-3 dB) | V I = 63 mV PP , gain = 2, R F = 750 Ω, single-ended input, differential output | V CC = 5 V | 97 | MHz | ||
| SSBW | Small-signal bandwidth (-3 dB) | V I = 63 mV PP , gain = 2, R F = 750 Ω, single-ended input, differential output | V CC = ±5 V | 98 | MHz | ||
| SSBW | Small-signal bandwidth (-3 dB) | V I = 63 mV PP , gain = 2, R F = 750 Ω, single-ended input, differential output | V CC = ±15 V | 100 | MHz | ||
| SR | Slew rate (2) | 67 | V/μs | ||||
| t s | Settling time | To 0.1% | Step voltage = 2 V, gain = 1 | 39 | ns | ||
| t s | Settling time | To 0.01% | Step voltage = 2 V, gain = 1 | 61 | ns | ||
| DISTORTION PERFORMANCE | DISTORTION PERFORMANCE | DISTORTION PERFORMANCE | DISTORTION PERFORMANCE | DISTORTION PERFORMANCE | DISTORTION PERFORMANCE | DISTORTION PERFORMANCE | DISTORTION PERFORMANCE |
| THD | Total harmonic distortion | V CC = 5 V, V O = 2 V PP , differential input/output | f = 250 kHz | -101 | dBc | ||
| THD | Total harmonic distortion | V CC = 5 V, V O = 2 V PP , differential input/output | f = 1 MHz | -87 | dBc | ||
| THD | Total harmonic distortion | V CC = ±5 V, V O = 2 V PP , differential input/output | f = 250 kHz | -100 | dBc | ||
| THD | Total harmonic distortion | V CC = ±5 V, V O = 2 V PP , differential input/output | f = 1 MHz | -87 | dBc | ||
| THD | Total harmonic distortion | V CC = ±15 V, V O = 2 V PP , differential input/output | f = 250 kHz | -102 | dBc | ||
| THD | Total harmonic distortion | V CC = ±15 V, V O = 2 V PP , differential input/output | f = 1 MHz | -88 | dBc | ||
| THD | Total harmonic distortion | V CC = ±5 V, V O = 4 V PP , differential input/output | f = 250 kHz | -94 | dBc | ||
| THD | Total harmonic distortion | V CC = ±5 V, V O = 4 V PP , differential input/output | f = 1 MHz | -79 | dBc | ||
| THD | Total harmonic distortion | V CC = ±15 V, V O = 4 V PP , differential input/output | f = 250 kHz | -95 | dBc | ||
| THD | Total harmonic distortion | V CC = ±15 V, V O = 4 V PP , differential input/output | f = 1 MHz | -80 | dBc | ||
| SFDR | Spurious-free dynamic range | V O = 2 V PP , f = 250 kHz, differential input/output | V CC = ±2.5 | 103 | dBc | ||
| SFDR | Spurious-free dynamic range | V O = 2 V PP , f = 250 kHz, differential input/output | V CC = ±5 | 106 | dBc | ||
| SFDR | Spurious-free dynamic range | V O = 2 V PP , f = 250 kHz, differential input/output | V CC = ±15 | 108 | dBc | ||
| SFDR | Spurious-free dynamic range | V O = 4 V PP , f = 250 kHz, differential input/output | V CC = ±5 | 98 | dBc | ||
| SFDR | Spurious-free dynamic range | V O = 4 V PP , f = 250 kHz, differential input/output | V CC = ±15 | 100 | dBc | ||
| IMD3 | Third intermodulation distortion | V I(PP) = 4 V, F 1 = 3 MHz, F 2 = 3.5 MHz | V I(PP) = 4 V, F 1 = 3 MHz, F 2 = 3.5 MHz | -53 | dBc | ||
| OIP3 | Third-order intercept | V I(PP) = 4 V, F 1 = 3 MHz, F 2 = 3.5 MHz | V I(PP) = 4 V, F 1 = 3 MHz, F 2 = 3.5 MHz | 41.5 | dB | ||
| NOISE PERFORMANCE | NOISE PERFORMANCE | NOISE PERFORMANCE | NOISE PERFORMANCE | NOISE PERFORMANCE | NOISE PERFORMANCE | NOISE PERFORMANCE | NOISE PERFORMANCE |
| V n | Input voltage noise | f = 10 kHz | 1.25 | nV/√Hz | |||
| I n | Input current noise | f = 10 kHz | 1.7 | pA/√Hz | |||
| DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE | DC PERFORMANCE |
| A OL | Open-loop gain | T A = 25°C | 71 | 78 | dB | ||
| A OL | Open-loop gain | T A = full range | 69 | dB | |||
| V OS | Input offset voltage | T A = 25°C | ±0.2 | 2 | mV | ||
| V OS | Input offset voltage | T A = full range (1) | 3 | ||||
| Common-mode input offset voltage Input offset voltage drift | Referred to V OCM T A = full range (1) | 0.2 2 | 5.5 | mV μV/°C | |||
| I IB | Input bias current | T A = full range (1) | 5 | 15.4 | μA | ||
| I OS | Input offset current Input offset current drift | T A = full range (1) | 100 1 | 500 | nA nA/°C | ||
| INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS | INPUT CHARACTERISTICS |
THS4131CDGN Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V I | Input voltage | -V CC | +V CC | V |
| V CC- to V CC+ | Supply voltage | 33 | V | |
| Supply turn on and turn off dV/dT (2) | 1.7 | V/μs | ||
| I O | Output current (3) | 150 | mA | |
| V ID | Differential input voltage | -1.5 | 1.5 | V |
| I IN | Continuous input current | 10 | mA | |
| T J | Junction temperature | 150 | °C | |
| T J | Junction temperature, continuous operation, long-term reliability (4) | 125 | °C | |
| T A | Ambient temperature C-suffix | 0 | 70 | °C |
| T A | I-suffix | -40 | 85 | °C |
| T stg | Storage temperature | -65 | 150 | °C |
- (1) Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute maximum ratings do not imply functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions. If briefly operating outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not sustain damage, but it may not be fully functional. Operating the device in this manner may affect device reliability, functionality, performance, and shorten the device lifetime.
- (2) Stay below this specification to make sure that the edge-triggered ESD absorption devices across the supply pins remain off.
- (3) Some of the THS413x packages incorporate a thermal pad on the underside of the chip. This thermal pad acts as a heat sink and must be connected to a thermally dissipative plane for proper power dissipation. Failure to do so can result in exceeding the maximum junction temperature which can permanently damage the device. See TI technical briefs SLMA002 and SLMA004 for more information about using the PowerPAD integrated circuit package.
- (4) The maximum junction temperature for continuous operation is limited by package constraints. Operation greater than this temperature can result in reduced reliability, reduced lifetime of the device, or both.
THS4131CDGN Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | |||
|---|---|---|---|---|---|---|
| V CC | Supply voltage | Dual supply Single supply | ±2.5 | ±15 30 | V | |
| T A | Operating free-air temperature | C-suffix device I-suffix device | 5 0 -40 | 70 85 | °C |
THS4131CDGN Thermal Information
| THERMAL METRIC (1) | THERMAL METRIC (1) | THS413x - D (SOIC) - 8 PINS | THS413x - DGK (VSSOP) - 8 PINS | THS413x - DGN (HVSSOP) - 8 PINS | UNIT |
|---|---|---|---|---|---|
| R θJA | Junction-to-ambient thermal resistance | 126.3 | 147.3 | 57.6 | °C/W |
| R θJC(top) | Junction-to-case (top) thermal resistance | 67.3 | 37.9 | 76.3 | °C/W |
| R θJB | Junction-to-board thermal resistance | 69.8 | 83.2 | 30.0 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 19.5 | 0.9 | 4.0 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 69.0 | 81.6 | 29.9 | °C/W |
| R θJC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A | 14.3 | °C/W |
- (1) For information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.
THS4131CDGN Typical Application
Figure 9-5. Antialias Filtering
For signal conditioning in ADC applications, make sure to limit the input frequency to the ADC. Low-pass filters can prevent the aliasing of the high-frequency noise with the frequency of operation. This design example shows a method by which the noise can be filtered in the THS413x. Figure 9-5 shows the design example for the THS413x in active low-pass filter topology driving an ADC.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| THS4130 | Texas Instruments | — |
| THS4131 | Texas Instruments | DGK (VSSOP, 8) |
| THS4131CD | Texas Instruments | — |
| THS4131CDGK | Texas Instruments | — |
| THS4131CDGKR | Texas Instruments | — |
| THS4131CDGNR | Texas Instruments | — |
| THS4131CDR | Texas Instruments | — |
| THS4131ID | Texas Instruments | — |
| THS4131IDGK | Texas Instruments | |
| THS4131IDGKR | Texas Instruments | — |
| THS4131IDGKR.B | Texas Instruments | — |
| THS4131IDGN | Texas Instruments | — |
| THS4131IDGNR | Texas Instruments | — |
| THS4131IDGNR.B | Texas Instruments | — |
| THS4131IDR | Texas Instruments | — |
| THS4131IDR.B | Texas Instruments | — |
More datasheets
Ask your AI agent about the THS4131CDGN
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the THS4131CDGN run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.