Semiconductors Datasheets
5,099 Semiconductors datasheets read into specs, pinouts and ratings. Parts from Texas Instruments, STMicroelectronics and Microchip Technology.
Semiconductors datasheets, page 128
5,099 parts · page 128 of 170. Most used first, then by part number.
SN74AUP2G125RSER
Texas Instruments
Low-power dual bus buffer gate with 3-state outputs, 0.8-V to 3.6-V VCC operation, input-disable feature and Ioff partial-power-down support
SN74AUP2G125RSER.B
Texas Instruments
Low-power dual bus buffer gate with 3-state outputs, 0.8 V to 3.6 V VCC operation, input-disable feature and Ioff partial-power-down support
SN74AUP2G125YFPR.B
Texas Instruments
Low-power dual bus buffer gate with 3-state outputs and active-high output enable, operating from 0.8 V to 3.6 V VCC with 3.6-V I/O tolerance and partial-power-down (Ioff) support
SN74AUP2G125YZPR
Texas Instruments
Low-power dual bus buffer gate with 3-state outputs, 0.8-V to 3.6-V VCC operation, input-disable feature and Ioff partial-power-down support
SN74AUP2G125YZPR.B
Texas Instruments
Low-power dual bus buffer gate with 3-state outputs, 0.8-V to 3.6-V VCC operation, 3.6-V I/O tolerant, with input-disable and Ioff partial-power-down support
SN74HC595
Texas Instruments
8-bit serial-in, parallel-out shift register feeding an 8-bit D-type storage register with parallel 3-state outputs, separate shift/storage clocks, and direct clear
SN74HC595N
Texas Instruments
8-bit serial-in, parallel-out shift register feeding an 8-bit D-type storage register with 3-state parallel outputs, separate shift/storage clocks and direct clear
SN74LV1T125
Texas Instruments
Single Power Supply Single Buffer Gate with 3-State Output CMOS Logic Level Shifter, supporting voltage translation applications with reduced input thresholds.
SN74LV1T125-Q1
Texas Instruments
SN74LV1T125DBVR
Texas Instruments
IC BUFF NON-INVERT 5.5V SOT-23-5
SN74LV1T125DBVR.A
Texas Instruments
SN74LV1T125DCKR
Texas Instruments
SN74LV1T125DCKR.A
Texas Instruments
SN74LV1T126
Texas Instruments
SN74LVC1G08-EP
Texas Instruments
Single 2-input positive-AND logic gate (Enhanced Product version) designed for 1.65-V to 5.5-V VCC operation with 5.5-V tolerant inputs and ±24-mA output drive.
SN74LVC2T45
Texas Instruments
Dual-bit noninverting bus transceiver with configurable dual-rail voltage translation between 1.65V and 5.5V nodes, with VCC isolation and Ioff partial-power-down support
SNX4HC245
Texas Instruments
Octal bus transceiver with 3-state outputs for asynchronous two-way communication between data buses, operating from 2 V to 6 V
SP232A
MaxLinear
Enhanced single +5V RS-232/V.28 dual driver/receiver with on-chip charge pump, 120Kbps data rate under load and 2kV ESD protection
SP233A
MaxLinear
Enhanced RS-232/V.28 dual driver/dual receiver operating from a single +5V supply; the SP233A integrates the charge pump capacitors so no external capacitors are required, with 120Kbps data rate under load.
SP310A
MaxLinear
Enhanced single +5V RS-232/V.28 line driver/receiver pair with on-chip charge pump, 120Kbps data rate under load, and low-power shutdown mode (18-pin, 2 drivers/2 receivers, TTL tri-state)
SP312A
MaxLinear
Enhanced single +5V RS-232/V.28 line driver/receiver with on-chip charge pump, low-power shutdown, receiver wake-up and TTL tri-state (SP312A variant)
SP3232E
MaxLinear
SP3485
MaxLinear
+3.3V low power half-duplex RS-485/RS-422 transceiver with 10Mbps data rate, -7V to +12V common-mode range, and low-power shutdown mode
SP3485CN-L
MaxLinear
IC TRANSCEIVER HALF 1/1 8SOIC
SP3485EN-L
MaxLinear
3.3V low-power half-duplex RS-485/RS-422 transceiver with 10Mbps data rate, driver/receiver enable, and low-power shutdown mode
SP3485EN-L/TR
MaxLinear
IC TXRX 8-SOIC
SP481E
MaxLinear
Enhanced ESD, low-power +5V BiCMOS half-duplex RS-485/RS-422 transceiver with driver/receiver enable and low-power shutdown mode (SP481E), operating up to 10Mbps
SP485
MaxLinear
Enhanced low-power +5V half-duplex RS-485/RS-422 transceiver with +/-15kV ESD protection and up to 10Mbps data rate
SP485E
MaxLinear
Enhanced ESD, low power BiCMOS half-duplex RS-485/RS-422 transceiver for +5V multi-drop operation up to 10Mbps
SP485ECN-L
MaxLinear
Enhanced low-power +5V half-duplex RS-485/RS-422 transceiver with enhanced ESD protection (+/-15kV IEC air discharge) and up to 10Mbps data rate