Power Switches Datasheets
23 Power Switches datasheets read into specs, pinouts and ratings. Parts from Diodes, onsemi and Texas Instruments.
Manufacturers
- Diodes (7)
- onsemi (4)
- Texas Instruments (4)
- Toshiba (4)
Power Switches datasheets
23 parts · page 1 of 1. Most used first, then by part number.
CH217K
WCH
USB port power distribution switch with adjustable current limit (400mA to 2.7A via external resistor), integrated overcurrent, overtemperature and undervoltage protection, 70mΩ on-resistance.
AP22653W6-7
Diodes Incorporated
LOAD SWITCH,SOT26,T&R,3K
ADG1434YCPZ-REEL
Analog Devices
Monolithic iCMOS quad SPDT analog switch with 4.7 Ω max on resistance, break-before-make action, and EN pin, specified for ±15 V/+12 V/±5 V supplies
ADG1434YRUZ-REEL7
Analog Devices
4 Ω RON quad SPDT (four independently selectable SPDT) iCMOS analog switch with break-before-make action, operating from ±15 V/+12 V/±5 V supplies
AP22653
Diodes Incorporated
Single-channel precision adjustable current-limited load switch with active-high enable, constant-current limiting during overcurrent, programmable limit 125mA to 2665mA via external resistor, and up to 2.1A continuous load current.
AP22653/53A
Diodes Incorporated
Single-channel precision adjustable current-limited high-side power switch (active-high enable, latch-off on overcurrent) with 125mA to 2665mA programmable current limit and up to 2.1A continuous load current.
AP22653A
Diodes Incorporated
Single-channel precision adjustable current-limited high-side power switch (125mA to 2665mA programmable limit) with active-high enable, latch-off on overcurrent, reverse current blocking, and fault reporting, up to 2.1A continuous load.
AP22653AFDZ-7
Diodes Incorporated
Single-channel precision adjustable current-limited high-side power switch with active-high enable and latch-off overcurrent protection, programmable 125mA to 2665mA current limit via external resistor, up to 2.1A continuous load.
AP22653AW6-7
Diodes Incorporated
Single-channel precision adjustable current-limited high-side power switch (125mA to 2665mA limit set by external resistor) with latch-off on over-current, active-high enable, reverse current blocking and fault reporting, up to 2.1A continu
AP22653FDZ-7
Diodes Incorporated
Single-channel precision adjustable current-limited high-side power switch with constant-current limiting, active-high enable, reverse current blocking and 125mA to 2665mA programmable limit via external resistor
NCV47722
onsemi
Automotive high side switch with 250 mA output, adjustable current limit up to 350 mA, current sense output, and OFF/ON state diagnostics (short-to-battery, open load, overcurrent)
NCV47722DAJR2G
onsemi
Automotive 250 mA high side switch with adjustable current limit (up to 350 mA), current sense output, and ON/OFF state diagnostics (STB, open load), with thermal and reverse-voltage protection.
NCV47722MNWTXG
onsemi
Automotive 250 mA high side switch with adjustable current limit (up to 350 mA), current sense output, and ON/OFF state diagnostics (STB, open load, overcurrent, short to ground)
NCV47722PDAJR2G
onsemi
250 mA automotive high side switch with adjustable current limit (up to 350 mA), current sense output, and ON/OFF state diagnostics (STB, open load, overcurrent, short to ground)
TCK106AG
Toshiba
1.0 A Load Switch IC with Slew Rate Control Driver, featuring low ON resistance and wide input voltage operation in an ultra-small package.
TCK107AG
Toshiba
Power Switch ICs - Power Distribution
TCK108AG
Toshiba
1.0 A load switch IC with slew rate control driver, 34 mΩ typical ON resistance at 5.0 V, active-low control and output auto-discharge, in an ultra small WCSP4D package
TCK10XAG
Toshiba
1.0 A load switch IC with slew rate control driver, low RON (34 mOhm typ at 5.0 V) and 1.1-5.5 V input range, in ultra small WCSP4D package
TPS22810
Texas Instruments
Single-channel 2.7-18 V integrated N-channel MOSFET load switch with 79 mΩ typical on-resistance, configurable rise time, adjustable quick output discharge, UVLO and thermal shutdown.
TPS22810-Q1
Texas Instruments
Single-channel 2.7-18 V, 79 mOhm N-channel load switch with configurable rise time, adjustable quick output discharge, UVLO and thermal shutdown (datasheet is for TPS22810; -Q1 is the automotive-qualified version).
TPS22810DRVR
Texas Instruments
Single-channel 2.7-18 V, 79 mΩ N-channel load switch with configurable rise time, adjustable quick output discharge, UVLO and thermal shutdown
TPS22810DRVT
Texas Instruments
Single-channel 2.7-18 V, 79 mΩ N-channel load switch with configurable rise time, adjustable quick output discharge, UVLO and thermal shutdown
VN751PTTR
STMicroelectronics
Monolithic single-channel high-side driver (VIPower M03) with 60 mOhm RDS(on), thermal shutdown, current limitation, active VDS clamp for fast demagnetization, and open-drain status output, suited for IEC 61131-2 industrial applications