Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

TMP107525

Digital Temperature Sensor

The TMP107525 is a digital temperature sensor from Texas Instruments. View the full TMP107525 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

TMP107525 shares its datasheet with TMP1075, whose page lists every part number it covers.

Official TMP107525 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Temperature Sensors

TMP107525 Key Specifications

ParameterValue
InterfaceI2C, SMBus
Resolution12 bits (0.0625°C)
I2C Addressesup to 32 (4 for TMP1075N)
Average Current2.7µA
Conversion Rate27.5 ms to 220 ms (TMP1075)
Shutdown Current0.37µA
Supply Voltage (TMP1075)1.7V to 5.5V
Supply Voltage (TMP1075N)1.62V to 3.6V
Temperature Accuracy (Max)±1°C from -40°C to 110°C; ±2°C from -55°C to 125°C
Temperature Accuracy (Typical)±0.25°C from -55°C to 125°C
Operating Temperature (D, DGK, DSG)-55°C to 125°C
Operating Temperature (DRL, TMP1075N)-40°C to 125°C

TMP107525 Overview

Part: TMP1075 — Texas Instruments

Type: Digital Temperature Sensor

Description: The TMP1075 is a highly accurate, low-power digital temperature sensor with an I2C and SMBus interface, offering ±1°C maximum accuracy from -40°C to 110°C and a 12-bit resolution, available in multiple industry-standard packages.

Operating Conditions:

  • Supply voltage: 1.62 V to 5.5 V
  • Operating temperature: -55°C to 125°C (TMP1075), -40°C to 125°C (TMP1075N)
  • SCL operating frequency: 0.001 to 2.85 MHz

Absolute Maximum Ratings:

  • Max supply voltage: 6.5 V (TMP1075), 4 V (TMP1075N)
  • Max junction temperature: 150 °C
  • Max storage temperature: 130 °C

Key Specs:

  • Temperature accuracy: ±1°C (maximum) from -40°C to 110°C (TMP1075)
  • Temperature accuracy: ±2°C (maximum) from -55°C to 125°C (TMP1075)
  • Resolution: 0.0625 °C (12 Bits)
  • Average current: 2.7 μA (TMP1075, R1=1, R0=1)
  • Shutdown current: 0.37 μA (TMP1075, serial bus inactive)
  • ADC Conversion time (one-shot mode): 4.5 ms (typical) to 7 ms (max)
  • I2C Addresses: Supports up to 32 (TMP1075), 4 (TMP1075N)
  • SCL operating frequency: 0.001 to 2.56 MHz (TMP1075 High-Speed Mode), 0.001 to 2.85 MHz (TMP1075N High-Speed Mode)

Features:

  • Low power consumption
  • Digital interface: SMBus, I2C
  • Software compatibility with industry standard LM75 and TMP75
  • ALERT pin function
  • NIST traceability

Applications:

  • Power-supply temperature monitoring
  • Connected peripherals & printers
  • PC and notebooks
  • Mobile phones
  • Battery management
  • Enterprise machine
  • Thermostat
  • Wireless environmental sensor and HVAC
  • Electro mechanical device temperature

Package:

  • VSSOP (DGK, 8-pin)
  • SOIC (D, 8-pin)
  • WSON (DSG, 8-pin)
  • SOT563 (DRL, 6-pin)

TMP107525 Features

  • Temperature accuracy:
  • -±0.25°C (typical) from -55°C to 125°C
  • -±1°C (maximum) from -40 °C to 110°C
  • -±2°C (maximum) from -55°C to 125°C
  • Low power consumption:
  • -2.7μA Average current
  • -0.37μA Shutdown current
  • Supply range options from: 1.62V to 5.5V
  • Temperature independent of supply
  • Digital interface: SMBus, I 2 C
  • Software compatibility with industry standard LM75 and TMP75
  • Can coexist in I 3 C mixed fast mode bus
  • Resolution: 12 Bits
  • Supports up to 32 I2C addresses
  • ALERT pin function
  • NIST traceability

TMP107525 Applications

TMP107525 Pin Configuration

Figure 5-1. D Package 8-Pin SOIC Top View

Figure 5-1. D Package 8-Pin SOIC Top View

.

.

.

Figure 5-2. DGK Package 8-Pin VSSOP Top View

Figure 5-2. DGK Package 8-Pin VSSOP Top View

  1. Pin 1 is determined by orienting the package marking as indicated in the diagram.
  2. Referred to as the TMP1075N orderable throughout the document.

Figure 5-4. DRL Package 6-Pin SOT563 Top View

Figure 5-3. DSG Package 8-Pin WSON Top View

Table 5-1. Pin Functions

PINPINPINTYPE (1)
NAMESOIC / VSSOP / WSONSOT563TYPE (1)
A074I
A16-I
A25-I
ALERT33O
GND42-
SCL21I
SDA16I/O
V+85I
  • (1) I = Input, O = Output, I/O = Input or Output

Table 5-1. Pin Functions

TMP107525 Electrical Characteristics

at T A = -55°C to +125°C and V+ = 1.7 V to 5.5 V (unless noted); typical specification are at T A = 25°C and V+=3.3 V

PARAMETERTEST CONDITIONSMINTYPMAXUNIT
TEMPERATURE INPUT
Range-55125°C
Accuracy (temperature error)-40°C to 110°C±0.25±1°C
DGK, D-55°C to 125°C±0.25±2
DSG-40°C to 75°C±0.25±1°C
-55°C to 125°C±0.25±2°C
Accuracy (temperature error) vs supplyPSRR±0.03°C/V
Resolution1 LSB (12 bit)0.0625°C
Repeatability (1)25°C, V+= 3.3 V (2)0.0625°C
Long-term drift (3)500 hours at 150°C, 5.5 V0.0625°C
DIGITAL INPUT/OUTPUTInput capacitance5pF
V IHHigh-level input logic0.7(V+)V
V ILLow-level input logic0.3(V+)V
I INLeakage input current-0.2500.25μA
Input voltage hysteresisSCL and SDA pins600mV
V OLLow-level output logicI OL = -3 mA, SDA and ALERT pins00.150.4V
ADC Conversion timeone-shot mode4.55.57ms
T CR1 = 0, R0 = 0 (default)27.5ms
ConversionTimeR1 = 0, R0 = 1
R1 = 1, R0 = 0
R1 = 1, R0 = 1		55
110
220
Reset timeThe time between reset until ADC conversion start0.3ms
Conversion Rate Variation-10010%
POWER SUPPLY
Operating voltage range1.73.35.5V

at T A = -55°C to +125°C and V+ = 1.7 V to 5.5 V (unless noted); typical specification are at T A = 25°C and V+=3.3 V

at T A = -55°C to +125°C and V+ = 1.7 V to 5.5 V (unless noted); typical specification are at T A = 25°C and V+=3.3 V

PARAMETERPARAMETERTEST CONDITIONSMINTYPMAXUNIT
I QQuiescent current (serial bus inactive)R1 = 0, R0 = 0 (default)1020μA
I QQuiescent current (serial bus inactive)R1 = 0, R0 = 15.59
I QQuiescent current (serial bus inactive)R1 = 1, R0 = 046μA
I QQuiescent current (serial bus inactive)R1 = 1, R0 = 12.74
I QQuiescent current (serial bus inactive)During 5.5 ms active conversion5285μA
I SDShutdown currentSerial bus active, SCL frequency = 400 kHz, A0=A1=A2=GND13μA
I SDShutdown currentSerial bus inactive, A0=A1=A2=SCL=SDA=V+, 25°C0.370.65μA
I SDShutdown currentSerial bus inactive, A0=A1=A2=SCL=SDA=V+0.373.5μA
Power supply thresholdsSupply rising, Power-on Reset1.22V
Power supply thresholdsSupply failing, Brown-out Detect1.1V

TMP107525 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)

MINMAXUNIT
Power supply, V+TMP10756.5V
Power supply, V+TMP1075N4
Input voltage SCL, SDA, A1, A0TMP1075-0.36.5V
Input voltage SCL, SDA, A0TMP1075N-0.34V
Input voltage ALERTTMP1075N(V+)+0.3 and ≤4V
Input voltage A2 pinTMP1075-0.3(V+) + 0.3V
Operating temperature-55150°C
Junction temperature, T J150°C
Storage temperature, T stg-60130°C

TMP107525 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MINNOMMAXUNIT
Supply voltageTMP10751.75.5V
Supply voltageTMP1075N1.623.33.6V
Operating free-airTMP1075-55125°C
Operating free-airTMP1075N-40125°C

TMP107525 Thermal Information

THERMAL METRIC (1)TMP1075 DGK (VSSOP)TMP1075 D (SOIC)TMP1075 DSG (WSON) 8 PINSTMP1075N DRL (SOT)UNIT
8 PINS8 PINS6 PINS
R θJAJunction-to-ambient thermal resistance202.5130.487.4240.2°C/W
R θJC(top)Junction-to-case (top) thermal resistance8276.9111.196.4°C/W
R θJBJunction-to-board thermal resistance124.472.354124.3°C/W
Ψ JTJunction-to-top characterization parameter17.9329.84°C/W
Ψ JBJunction-to-board characterization parameter122.671.954.4123.1°C/W
R θJC(bot)Junction-to-case (bottom) thermal resistance____28.1__°C/W
M TThermal mass16.664.25__mJ/°C

TMP107525 Typical Application

The TMP1075 can measure the PCB temperature of the location where the user mounts the device. The TMP1075 features two-wire SMBus and I 2 C interface compatibility, with the TMP1075 allowing up to 32 (TMP1075N: 4) devices on one bus. The TMP1075 requires a pullup resistor on the SDA pin, and if needed, on the SCL and ALERT pins. A 0.01-μF bypass capacitor is also required (see Figure 8-1 ).

TMP107525 Package Information

PART NUMBERPACKAGE (1)PACKAGE SIZE (2)
TMP1075VSSOP (DGK, 8)3.00mm × 4.90mm
TMP1075SOIC (D, 8)4.90mm × 6.00mm
TMP1075WSON (DSG, 8)2.00mm × 2.00mm
TMP1075SOT563 (DRL, 6) (3)1.60mm × 1.60mm
  • (1) For more information, see Section 11.
  • (2) The package size (length × width) is a nominal value and includes pins, where applicable.
  • (3) Available as the TMP1075N orderable.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
TMP1075Texas InstrumentsVSSOP-8 (DGK)
TMP10756Texas Instruments—
TMP1075DGKTexas InstrumentsVSSOP-8
TMP1075DGKRTexas Instruments8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
TMP1075DGKR.ATexas InstrumentsVSSOP-8
TMP1075DGKTTexas Instruments8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
TMP1075DRTexas Instruments8-SOIC (0.154", 3.90mm Width)
TMP1075DR.ATexas InstrumentsSOIC-8
TMP1075DSGTexas InstrumentsWSON-8
TMP1075DSGRTexas Instruments8-WFDFN Exposed Pad
TMP1075DSGR.ATexas InstrumentsWSON-8 2.0x2.0mm
TMP1075DSGTTexas Instruments8-WFDFN Exposed Pad
TMP1075NTexas InstrumentsSOT-563-6
TMP1075N12Texas InstrumentsSOT563-6
TMP1075N20Texas InstrumentsSOT-563-6
TMP1075N24Texas InstrumentsSOT563-6
TMP1075N25Texas InstrumentsSOT563-6
TMP1075N9Texas InstrumentsSOT-563-6
TMP1075NDRLTexas InstrumentsSOT563-6
TMP1075NDRLRTexas InstrumentsSOT-563, SOT-666
TMP1075NDRLR.ATexas InstrumentsSOT-5X3-6
TMP1075NDRLR.BTexas InstrumentsSOT563-6 1.6x1.6mm
TMP1075NDRLTTexas InstrumentsSOT-563, SOT-666

Other Temperature Sensors

  • BME280 – Bosch Sensortec, Digital Humidity, Pressure, and Temperature Sensor
  • SHT30 – Sensirion, Humidity and Temperature Sensor
  • Si7021 – Silicon Labs, I2C Humidity and Temperature Sensor
  • SHT31-DIS-B2.5kS – Sensirion, Digital Humidity and Temperature Sensor
  • TMP116NAIDRVR – Texas Instruments, Digital Temperature Sensor
  • BME280.C – Bosch Sensortec, Digital Humidity, Pressure, and Temperature Sensor
  • BME280.H – Bosch Sensortec, Digital Humidity, Pressure, and Temperature Sensor
  • DS18B20 – Analog Devices, Digital Thermometer

All Temperature Sensors datasheetsAll Texas Instruments datasheets (2,418)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the TMP107525

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the TMP107525 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.