TLV9064S
CMOS Operational AmplifierThe TLV9064S is a cmos operational amplifier from Texas Instruments. View the full TLV9064S datasheet below including key specifications.
TLV9064S shares its datasheet with TLV9061, whose page lists every part number it covers.
Official TLV9064S datasheet (PDF) — the source this page was extracted from.
TLV9064S Key Specifications
| Parameter | Value |
|---|---|
| Channels | 4 (quad) with SHDN A/B and SHDN C/D |
| Output Swing | within 15mV of rails with 10kΩ load |
| Wideband Noise | 10nV/√Hz |
| Input/Output Type | Rail-to-rail input and output |
| Quiescent Current | 538µA per channel |
| Input Bias Current | 0.5pA |
| Package Dimensions | 3.00mm × 3.00mm |
| Input Offset Voltage | ±0.3mV (typical), ±1.6mV (max) at VS = 5V |
| Supply Voltage Range | 1.8V to 5.5V |
| Capacitive Load Drive | 100pF (resistive open-loop output impedance) |
| Gain Bandwidth Product | 10MHz |
| Input Offset Voltage Drift | ±0.53µV/°C |
| Operating Temperature Range | -40°C to +125°C |
TLV9064S Overview
Part: TLV9061 / TLV9062 / TLV9064 (TLV906xS shutdown versions) — Texas Instruments
Type: Rail-to-Rail Input/Output CMOS Operational Amplifier
Description: 1.8–5.5 V, 10 MHz GBW, rail-to-rail input and output CMOS op amp with ±0.3 mV typical offset, 538 μA quiescent current and integrated RFI/EMI filters, available in single, dual and quad versions.
Operating Conditions:
- Supply voltage: 1.8–5.5 V
- Operating temperature: -40 to 125 °C
- Unity-gain stable; capacitive load drive of 100 pF, with resistive open-loop output impedance for easier stabilization at higher loads
Absolute Maximum Ratings:
- Max supply voltage: 6 V
- Signal input pin voltage, common mode: (V-) - 0.5 V to (V+) + 0.5 V
- Signal input pin voltage, differential: (V+) - (V-) + 0.2 V
- Signal input pin current: ±10 mA
- Output short-circuit (to ground, one amplifier per package): continuous
- Max junction temperature: 150 °C
- Storage temperature: -65 to 150 °C
Key Specs:
- Input offset voltage: ±0.3 mV (typical)
- Unity-gain bandwidth: 10 MHz
- Wideband noise: 10 nV/√Hz
- Input bias current: 0.5 pA
- Quiescent current: 538 μA
- Shutdown current (S versions): below 1 μA typical
- Input current noise density: 23 fA/√Hz
Features:
- Rail-to-rail input and output
- Unity-gain stable
- Internal RFI and EMI filters
- Operation down to 1.8 V supply
- Resistive open-loop output impedance for easier stability with higher capacitive loads
- Shutdown versions (TLV906xS)
- No phase inversion under overdrive
- Extended temperature range: -40 °C to +125 °C
Applications:
- E-bikes
- Smoke detectors
- HVAC: heating, ventilating and air conditioning
- Motor control: AC induction
- Refrigerators
- Wearables
- Laptops
- Washing machines
- Sensor signal conditioning
- Power modules
- Barcode scanners
- Active filters
- Low-side current sensing
Package:
- TLV9061: SOT-23 (5), SC70 (5), SOT-553 (5), X2SON (5); TLV9061S: SOT-23 (6)
- TLV9062: SOIC (8), TSSOP (8), VSSOP (8), WSON (8), X2QFN (10); TLV9062S: VSSOP (10), X2QFN (10)
- TLV9064: SOIC (14), TSSOP (14), WQFN (16), WQFN (14); TLV9064S: WQFN (16)
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TLV9061 | Texas Instruments | SOT-23 (5) |
| TLV9061-Q1 | Texas Instruments | — |
| TLV9061IDBVR | Texas Instruments | SC-74A, SOT-753 |
| TLV9061IDCKR | Texas Instruments | 5-TSSOP, SC-70-5, SOT-353 |
| TLV9061IDPWR | Texas Instruments | 4-XFDFN Exposed Pad |
| TLV9061S | Texas Instruments | SOT-23 (6) |
| TLV9062 | Texas Instruments | — |
| TLV9062S | Texas Instruments | — |
| TLV9064 | Texas Instruments | — |
| TLV906XS | Texas Instruments | — |
Other Operational Amplifiers
- LM358 – onsemi, Dual Operational Amplifier
- NE5532 – Texas Instruments, Dual Operational Amplifier
- AD623A – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARMZ-REEL7 – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ-RL – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623B – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623BNZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
All Operational Amplifiers datasheetsAll Texas Instruments datasheets (2,418)
Ask your AI agent about the TLV9064S
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TLV9064S run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.