TLV9061-Q1
CMOS Operational AmplifierThe TLV9061-Q1 is a cmos operational amplifier from Texas Instruments. View the full TLV9061-Q1 datasheet below including key specifications.
TLV9061-Q1 shares its datasheet with TLV9061, whose page lists every part number it covers.
Official TLV9061-Q1 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Operational AmplifiersTLV9061-Q1 Key Specifications
| Parameter | Value |
|---|---|
| Input/Output | Rail-to-rail |
| Qualification | AEC-Q100 (Automotive) |
| Wideband Noise | 10nV/√Hz |
| Quiescent Current | 538µA |
| Unity-Gain Stable | Yes |
| Input Bias Current | 0.5pA |
| Number Of Channels | 1 |
| Input Offset Voltage | ±0.3mV |
| Supply Voltage Range | 1.8V to 5.5V |
| Capacitive Load Drive | 100pF |
| Gain Bandwidth Product | 10MHz |
| Output Swing (10kΩ Load) | within 15mV of supply rails |
| Operating Temperature Range | -40°C to +125°C |
TLV9061-Q1 Overview
Part: TLV9061 / TLV9062 / TLV9064 (TLV906xS shutdown versions) — Texas Instruments
Type: Rail-to-Rail Input/Output CMOS Operational Amplifier
Description: 1.8–5.5 V, 10 MHz GBW, rail-to-rail input and output CMOS op amp with ±0.3 mV typical offset, 538 μA quiescent current and integrated RFI/EMI filters, available in single, dual and quad versions.
Operating Conditions:
- Supply voltage: 1.8–5.5 V
- Operating temperature: -40 to 125 °C
- Unity-gain stable; capacitive load drive of 100 pF, with resistive open-loop output impedance for easier stabilization at higher loads
Absolute Maximum Ratings:
- Max supply voltage: 6 V
- Signal input pin voltage, common mode: (V-) - 0.5 V to (V+) + 0.5 V
- Signal input pin voltage, differential: (V+) - (V-) + 0.2 V
- Signal input pin current: ±10 mA
- Output short-circuit (to ground, one amplifier per package): continuous
- Max junction temperature: 150 °C
- Storage temperature: -65 to 150 °C
Key Specs:
- Input offset voltage: ±0.3 mV (typical)
- Unity-gain bandwidth: 10 MHz
- Wideband noise: 10 nV/√Hz
- Input bias current: 0.5 pA
- Quiescent current: 538 μA
- Shutdown current (S versions): below 1 μA typical
- Input current noise density: 23 fA/√Hz
Features:
- Rail-to-rail input and output
- Unity-gain stable
- Internal RFI and EMI filters
- Operation down to 1.8 V supply
- Resistive open-loop output impedance for easier stability with higher capacitive loads
- Shutdown versions (TLV906xS)
- No phase inversion under overdrive
- Extended temperature range: -40 °C to +125 °C
Applications:
- E-bikes
- Smoke detectors
- HVAC: heating, ventilating and air conditioning
- Motor control: AC induction
- Refrigerators
- Wearables
- Laptops
- Washing machines
- Sensor signal conditioning
- Power modules
- Barcode scanners
- Active filters
- Low-side current sensing
Package:
- TLV9061: SOT-23 (5), SC70 (5), SOT-553 (5), X2SON (5); TLV9061S: SOT-23 (6)
- TLV9062: SOIC (8), TSSOP (8), VSSOP (8), WSON (8), X2QFN (10); TLV9062S: VSSOP (10), X2QFN (10)
- TLV9064: SOIC (14), TSSOP (14), WQFN (16), WQFN (14); TLV9064S: WQFN (16)
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TLV9061 | Texas Instruments | SOT-23 (5) |
| TLV9061IDBVR | Texas Instruments | SC-74A, SOT-753 |
| TLV9061IDCKR | Texas Instruments | 5-TSSOP, SC-70-5, SOT-353 |
| TLV9061IDPWR | Texas Instruments | 4-XFDFN Exposed Pad |
| TLV9061S | Texas Instruments | SOT-23 (6) |
| TLV9062 | Texas Instruments | — |
| TLV9062S | Texas Instruments | — |
| TLV9064 | Texas Instruments | — |
| TLV9064S | Texas Instruments | WQFN-16 3.0x3.0mm |
| TLV906XS | Texas Instruments | — |
Other Operational Amplifiers
- LM358 – onsemi, Dual Operational Amplifier
- NE5532 – Texas Instruments, Dual Operational Amplifier
- AD623A – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARMZ-REEL7 – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ-RL – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623B – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623BNZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
All Operational Amplifiers datasheetsAll Texas Instruments datasheets (2,418)
Ask your AI agent about the TLV9061-Q1
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TLV9061-Q1 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.