Part: TLV900x — Texas Instruments

Type: Low-Power, Rail-to-Rail Input/Output (RRIO) Operational Amplifier

Description: A scalable CMOS operational amplifier family for cost-sensitive systems, featuring rail-to-rail input and output, 1 MHz unity-gain bandwidth, low 60 μA/channel quiescent current, and operation from 1.8 V to 5.5 V supply voltage.

Operating Conditions:

• Supply voltage: 1.8 V to 5.5 V
• Operating temperature: -40°C to 125°C

Absolute Maximum Ratings:

• Max supply voltage: 7 V

Key Specs:

• Input offset voltage: ±0.4 mV
• Unity-gain bandwidth product: 1 MHz
• Wideband noise: 27 nV/√Hz
• Input bias current: 5 pA
• Quiescent current: 60 μA/channel
• Capacitive load drive: 500 pF

Features:

• Scalable CMOS amplifier for low-cost applications
• Rail-to-rail input and output
• Unity-gain stable
• Integrated RFI and EMI filters
• No phase reversal in overdrive conditions
• Easier to stabilize with higher capacitive loads due to resistive open-loop output impedance
• Shutdown versions available (TLV9001S, TLV9002S, TLV9004S) with <1 μA typical current consumption

Applications:

• Sensor signal conditioning
• Power modules
• Active filters
• Low-side current sensing
• Smoke detectors
• Motion detectors
• Wearables
• Large and small home appliances
• EPOS
• Barcode scanners
• Personal electronics
• HVAC
• Motor control: AC induction

Package:

• SOT-23 (5, 6, 8, 14 pins)
• SC70 (5, 6 pins)
• SOT-553 (5 pins)
• X2SON (5 pins)
• SOIC (8, 14 pins)
• WSON (8 pins)
• VSSOP (8, 10 pins)
• TSSOP (8, 14 pins)
• X2QFN (10, 14 pins)
• DSBGA (9 pins)
• WQFN (16 pins)

• Scalable CMOS amplifier for low-cost applications

• Rail-to-rail input and output

• Low input offset voltage:

±0.4mV

• Unity-gain bandwidth product:

1MHz

• Low wideband noise:

27nV/ √ Hz

• Low input bias current:

5pA

• Low quiescent current:

60μA/channel

• Unity-gain stable

• Integrated RFI and EMI filters

• Operates down to 1.8V supply voltage

• Easier to stabilize with higher capacitive loads due to resistive open-loop output impedance

• Operating temperature range: -40°C to 125°C

• Sensor signal conditioning

• Power modules

• Active filters

• Low-side current sensing

• Smoke detectors

• Motion detectors

• Wearables

• Large and small home appliances

• EPOS

• Barcode scanners

• Personal electronics

• HVAC

: Heating, ventilation, and air conditioning

• Motor control:

AC induction

TLV9001IDBVR – SOT-23 (5-Pin) Pinout

Notes

• Package: SOT-23 (5-pin), 1.60mm × 2.90mm
• Part Variant: TLV9001IDBVR is the single-channel (TLV9001) variant in SOT-23 package with industrial temperature range
• Pin numbering extracted from the pin diagram (Figure 6-1) showing the DBV package variant
• V− can serve as ground in single-supply applications
• This is a rail-to-rail input/output operational amplifier with 1MHz bandwidth

For VS = (V+) -(V -) = 1.8V to 5.5V ( ±0.9V to ±2.75V ), TA = 25°C , RL = 10k Ω ( connected to VS /2 ), and VCM = VOUT = VS /2 ( unless otherwise noted )

• (1) For more information about new and old thermal metrics, see Semiconductor and IC Package Thermal Metrics.

The TLV900x series of low-power, rail-to-rail input and output operational amplifiers are designed for portable applications. These devices operate from 1.8V to 5.5V, are unity-gain stable, and are suitable for a wide range of general-purpose applications. The Class AB output stage is capable of driving loads less than or equal to 10kΩ connected to any point between V+ and V-. The input common-mode voltage range includes both supply rails, supporting the use of TLV900x devices in many single-supply applications.