Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

THS4521IDR

Fully Differential Amplifier

The THS4521IDR is a fully differential amplifier from Texas Instruments. View the full THS4521IDR datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

THS4521IDR shares its datasheet with THS4521, whose page lists every part number it covers.

Official THS4521IDR datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Fully Differential Amplifier

Lifecycle

Production (Last Updated: 19 hours ago)

THS4521IDR Key Specifications

ParameterValue
-3db Bandwidth145 MHz
Case/PackageSOIC
Common Mode Rejection Ratio80 dB
Gain Bandwidth Product95 MHz
Height1.75 mm
Input Bias Current900 nA
Input Offset Voltage (Vos)2 mV
Lead FreeLead Free
Length4.9 mm
Lifecycle StatusProduction (Last Updated: 19 hours ago)
Manufacturer Lifecycle StatusACTIVE (Last Updated: 19 hours ago)
Max Dual Supply Voltage2.75 V
Max I/O Voltage2 mV
Max Operating Temperature85 °C
Max Supply Voltage5.5 V
Min Dual Supply Voltage1.5 V
Min Operating Temperature-40 °C
Min Supply Voltage2.5 V
Nominal Supply Current1.14 mA
Number of Channels1
Number of Circuits1
Number of Elements1
Number of Pins8
Operating Supply Current1.14 mA
Operating Supply Voltage5 V
Output Current per Channel55 mA
PackagingCut Tape
Power Supply Rejection Ratio (PSRR)80 dB
Radiation HardeningNo
RoHSCompliant
Schedule B8542330000, 8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|8542330000|85
Slew Rate490 V/µs
Thickness1.58 mm
Voltage Gain119 dB
Weight75.891673 mg
Width3.91 mm

THS4521IDR Overview

Part: THS4521 / THS4522 / THS4524 (THS452x) — Texas Instruments

Type: Fully Differential Amplifier (negative rail input, rail-to-rail output)

Description: Very low-power fully differential amplifier family (single, dual, quad) with 145 MHz bandwidth (G = 1 V/V), 490 V/μs slew rate, 1.14 mA/ch supply current and operation from a 2.5 V to 5.5 V supply.

Operating Conditions:

  • Supply voltage: 2.7–5.4 V single supply (Recommended Operating Conditions); features list 2.5–5.5 V
  • Operating temperature: -40 to 85 °C
  • Characterized at VS+ − VS− = 3.3 V and 5 V

Absolute Maximum Ratings:

  • Max supply voltage (VS− to VS+): 5.5 V
  • Output current: 100 mA
  • Input current (VIN±, VOCM pins): 10 mA
  • Differential input voltage: 1 V
  • Max junction temperature: 150 °C (125 °C for continuous operation, long-term reliability)
  • Storage temperature: -65 to 150 °C
  • ESD: HBM ±1300 V, CDM ±1000 V, MM ±50 V

Key Specs:

  • Small-signal bandwidth at 3.3 V (VOUT = 100 mVPP): 135 MHz (G = 1), 49 MHz (G = 2), 18.6 MHz (G = 5), 9.3 MHz (G = 10)
  • Gain bandwidth product: 93 MHz (G = 10, 3.3 V)
  • Slew rate at 3.3 V (2 V step, G = 1, RL = 200 Ω): 420 V/μs rising, 460 V/μs falling
  • Open-loop gain at 3.3 V: 116 dB typ, 100 dB min
  • Input offset voltage at 3.3 V: ±0.2 mV typ, ±2 mV max (TA = 25 °C); ±3.5 mV max over -40 to 85 °C
  • Input bias current at 3.3 V: 0.65 μA typ, 0.85 μA max (TA = 25 °C)
  • Input voltage noise: 4.6 nV/√Hz; input current noise: 0.6 pA/√Hz
  • HD2/HD3 at 1 kHz (1 VRMS, G = 1): -133 dBc / -141 dBc
  • CMRR at 3.3 V: 100 dB typ, 80 dB min
  • Quiescent current: 1.14 mA/ch (feature list); power-down current 20 μA typ

Features:

  • Fully differential architecture
  • Negative rail input (NRI) and rail-to-rail output (RRO)
  • Output common-mode control with low offset
  • THD+N: -112 dBc (0.00025%) at 1 kHz (22 kHz BW, G = 1, 5 VPP)
  • Power-down capability
  • Single (THS4521), dual (THS4522) and quad (THS4524) versions

Applications:

  • Low-power SAR and ΔΣ ADC drivers
  • Low-power differential drivers
  • Low-power differential signal conditioning
  • Low-power, high-performance differential audio amplifiers

Package:

  • THS4521: SOIC-8 (4.90 × 3.91 mm), VSSOP-8 (3.00 × 3.00 mm)
  • THS4522: TSSOP-16 (5.00 × 4.40 mm)
  • THS4524: TSSOP-38 (9.70 × 4.40 mm)

THS4521IDR Applications

  • Low-Power SAR and ΔΣ ADC Drivers
  • Low-Power Differential Drivers
  • Low-Power Differential Signal Conditioning
  • Low-Power, High-Performance Differential Audio Amplifiers

THS4521IDR Pin Configuration

Pin Functions: THS4521

PIN - NAMEPIN - NO.DESCRIPTION
V IN-1Inverting amplifier input
V OCM2Common-mode voltage input
V S+3Amplifier positive power-supply input
V OUT+4Noninverting amplifier output
V OUT-5Inverting amplifier output
V S-6Amplifier negative power-supply input. Note that V S- is tied together on multi-channel devices.
PD7Power down. PD = logic low puts device into low-power mode. PD = logic high or open for normal operation.
V IN+8Noninverting amplifier input

Pin Functions: THS4521

THS4521IDR Electrical Characteristics

At VS+ = 3.3 V, VS= 0 V, VOCM = open, VOUT = 2 VPP (differential), R L = 1 k Ω differential, G = 1 V/V, single-ended input, differential output, and input and output referenced to midsupply, unless otherwise noted.

PARAMETERTEST CONDITIONSTEST LEVEL (1)MINTYPMAXUNIT
AC PERFORMANCE
V OUT = 100 mV PP , G = 1C135MHz
Small-signal bandwidthV OUT = 100 mV PP , G = 2C49MHz
Small-signal bandwidthV OUT = 100 mV PP , G = 5C18.6MHz
Small-signal bandwidthV OUT = 100 mV PP , G = 10C9.3MHz
Gain bandwidth productV OUT = 100 mV PP , G = 10C93MHz
Large-signal bandwidthV OUT = 2 V PP , G = 1C95MHz
Bandwidth for 0.1-dB flatnessV OUT = 2 V PP , G = 1C20MHz
Rising slew rate (differential)V OUT = 2-V Step, G = 1, R L = 200 ΩC420V/ μ s
Falling slew rate (differential)V OUT = 2-V Step, G = 1, R L = 200 ΩC460V/ μ s
OvershootV OUT = 2-V Step, G = 1, R L = 200 ΩC1.2%
UndershootV OUT = 2-V Step, G = 1, R L = 200 ΩC2.1%
Rise timeV OUT = 2-V Step, G = 1, R L = 200 ΩC4ns
Fall timeV OUT = 2-V Step, G = 1, R L = 200 ΩC3.5ns
Settling time to 1%V OUT = 2-V Step, G = 1, R L = 200 ΩC13ns
HARMONIC DISTORTION
2nd harmonicf = 1 MHz, V OUT = 2 V PP , G = 1C-85dBc
f = 1 kHz, V OUT = 1 V RMS , G = 1 (2) , differential inputC-133dBc
3rd harmonicf = 1 MHz, V OUT = 2 V PP , G = 1C-90dBc
f = 1 kHz, V OUT = 1 V RMS , G = 1 (2) , differential inputC-141dBc
Second-order intermodulation distortionTwo-tone, f 1 = 2 MHz, f 2 = 2.2 MHz, V OUT = 2-V PP envelopeC-83dBc
Third-order intermodulation distortionTwo-tone, f 1 = 2 MHz, f 2 = 2.2 MHz, V OUT = 2-V PP envelopeC-90dBc
Input voltage noisef > 10 kHzC4.6nV/ √ Hz
Input current noisef > 100 kHzC0.6pA/ √ Hz
Overdrive recovery timeOverdrive = ±0.5 VC80ns
Output balance errorV OUT = 100 mV, f ≤ 2 MHz (differential input)C-57dB
Closed-loop output impedancef = 1 MHz (differential)C0.3Ω
Channel-to-channel crosstalk (THS4522, THS4524)f = 10 kHz, measured differentiallyC-125dB
DC PERFORMANCE
Open-loop voltage gain (A OL )A100116dB
T A = +25°CA±0.2±2mV
Input-referred offset voltageT A = -40°C to +85°CB±0.5±3.5mV
Input offset voltage drift (3)T A = -40°C to +85°CC±2μ V/°C
(4)T A = +25°CB0.650.85μ A
Input bias currentT A = -40°C to +85°CB0.750.95μ A
Input bias current drift (3)T A = -40°C to +85°CB±1.75±2nA/°C
Input offsetT A = +25°CB±30±180nA
currentT A = -40°C to +85°CB±30±215nA
Input offset current drift (3)T A = -40°C to +85°CB±100±600pA/°C

THS4521IDR Absolute Maximum Ratings

Over operating free-air temperature range (unless otherwise noted). (1)

MINMAXUNIT
Supply voltage, V S- to V S+5.5V
Input/output voltage, V I (V IN± , V OUT± , V OCM pins)(V S- ) - 0.7(V S+ ) + 0.7V
Differential input voltage, V ID1V
Output current, I O100mA
Input current, I I (V IN± , V OCM pins)10mA
Continuous power dissipationSee Thermal Information tableSee Thermal Information table
Maximum junction temperature, T J150°C
Maximum junction temperature, T J (continuous operation, long-term reliability)125°C
Operating free-air temperature, T A-4085°C
Storage temperature, T stg-65150°C

over operating free-air temperature range (unless otherwise noted)

MINNOMMAXUNIT
V S+ single-supply voltage2.75.05.4V
T A Ambient temperature-402585°C

THS4521IDR Thermal Information

THERMAL METRIC (1)THS4521 - D - 8 PINSTHS4521 - DGK - 8 PINSTHS4522 - PW - 16 PINSTHS4524 - DBT - 38 PINSUNIT
R θ JAJunction-to-ambient thermal resistance127.8193.8124.2106.2°C/W
R θ JC(top)Junction-to-case (top) thermal resistance81.884.162.860.9°C/W
R θ JBJunction-to-board thermal resistance68.3115.368.565.5°C/W
ψ JTJunction-to-top characterization parameter32.217.915.818.5°C/W
ψ JBJunction-to-board characterization parameter67.8113.66865.1°C/W
R θ JC(bot)Junction-to-case (bottom) thermal resistanceN/AN/AN/AN/A°C/W

THS4521IDR Typical Application

The following circuits show application information for the THS4521, THS4522, and THS4524 family. For simplicity, power-supply decoupling capacitors are not shown in these diagrams; see Layout Guidelines for suggested guidelines. For more details on the use and operation of fully differential amplifiers, refer to the Application Report Fully-Differential Amplifiers (SLOA054), available for download from the TI web site at www.ti.com.

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
THS4521Texas InstrumentsSOIC (8)
THS4521DTexas Instruments—
THS4521IDTexas Instruments—
THS4521ID.BTexas Instruments—
THS4521IDGKRTexas Instruments—
THS4521IDGKR.BTexas Instruments—
THS4521IDGKTTexas Instruments—
THS4521IDGKT.BTexas Instruments—
THS4521IDR.BTexas Instruments—
THS4521IDRG4Texas Instruments—
THS4521IDRG4.BTexas Instruments—
THS4522Texas Instruments—
THS4524Texas Instruments—

More datasheets

All Texas Instruments datasheets (2,554)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the THS4521IDR

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the THS4521IDR run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.