THS4521
Fully Differential AmplifierThe THS4521 is a fully differential amplifier from Texas Instruments. View the full THS4521 datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.
Official THS4521 datasheet (PDF) — the source this page was extracted from.
THS4521 Key Specifications
| Parameter | Value |
|---|---|
| HD2 | -133 dBc at 10 kHz (1 VRMS, RL = 1 kΩ) |
| HD3 | -141 dBc at 10 kHz (1 VRMS, RL = 1 kΩ) |
| THD+N | -112 dBc (0.00025%) at 1 kHz |
| Channels | 1 (single FDA) |
| Slew Rate | 490 V/µs |
| Open-Loop Gain | 119 dB (DC) |
| Supply Voltage | 2.5V to 5.5V (±1.25V to ±2.75V) |
| Bandwidth (G=1) | 145 MHz |
| Input/Output Type | Negative rail input, rail-to-rail output |
| Quiescent Current | 1.14 mA/ch |
| Power-Down Current | 20 µA (typ) |
| Input Voltage Noise | 4.6 nV/√Hz (f = 100 kHz) |
| Operating Temperature Range | -40°C to +85°C |
THS4521 Overview
Part: THS4521 / THS4522 / THS4524 (THS452x) — Texas Instruments
Type: Fully Differential Amplifier (negative rail input, rail-to-rail output)
Description: Very low-power fully differential amplifier family (single, dual, quad) with 145 MHz bandwidth (G = 1 V/V), 490 V/μs slew rate, 1.14 mA/ch supply current and operation from a 2.5 V to 5.5 V supply.
Operating Conditions:
- Supply voltage: 2.7–5.4 V single supply (Recommended Operating Conditions); features list 2.5–5.5 V
- Operating temperature: -40 to 85 °C
- Characterized at VS+ − VS− = 3.3 V and 5 V
Absolute Maximum Ratings:
- Max supply voltage (VS− to VS+): 5.5 V
- Output current: 100 mA
- Input current (VIN±, VOCM pins): 10 mA
- Differential input voltage: 1 V
- Max junction temperature: 150 °C (125 °C for continuous operation, long-term reliability)
- Storage temperature: -65 to 150 °C
- ESD: HBM ±1300 V, CDM ±1000 V, MM ±50 V
Key Specs:
- Small-signal bandwidth at 3.3 V (VOUT = 100 mVPP): 135 MHz (G = 1), 49 MHz (G = 2), 18.6 MHz (G = 5), 9.3 MHz (G = 10)
- Gain bandwidth product: 93 MHz (G = 10, 3.3 V)
- Slew rate at 3.3 V (2 V step, G = 1, RL = 200 Ω): 420 V/μs rising, 460 V/μs falling
- Open-loop gain at 3.3 V: 116 dB typ, 100 dB min
- Input offset voltage at 3.3 V: ±0.2 mV typ, ±2 mV max (TA = 25 °C); ±3.5 mV max over -40 to 85 °C
- Input bias current at 3.3 V: 0.65 μA typ, 0.85 μA max (TA = 25 °C)
- Input voltage noise: 4.6 nV/√Hz; input current noise: 0.6 pA/√Hz
- HD2/HD3 at 1 kHz (1 VRMS, G = 1): -133 dBc / -141 dBc
- CMRR at 3.3 V: 100 dB typ, 80 dB min
- Quiescent current: 1.14 mA/ch (feature list); power-down current 20 μA typ
Features:
- Fully differential architecture
- Negative rail input (NRI) and rail-to-rail output (RRO)
- Output common-mode control with low offset
- THD+N: -112 dBc (0.00025%) at 1 kHz (22 kHz BW, G = 1, 5 VPP)
- Power-down capability
- Single (THS4521), dual (THS4522) and quad (THS4524) versions
Applications:
- Low-power SAR and ΔΣ ADC drivers
- Low-power differential drivers
- Low-power differential signal conditioning
- Low-power, high-performance differential audio amplifiers
Package:
- THS4521: SOIC-8 (4.90 × 3.91 mm), VSSOP-8 (3.00 × 3.00 mm)
- THS4522: TSSOP-16 (5.00 × 4.40 mm)
- THS4524: TSSOP-38 (9.70 × 4.40 mm)
THS4521 Applications
- Low-Power SAR and ΔΣ ADC Drivers
- Low-Power Differential Drivers
- Low-Power Differential Signal Conditioning
- Low-Power, High-Performance Differential Audio Amplifiers
THS4521 Pin Configuration
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | VIN- | - | Inverting amplifier input |
| 2 | VOCM | - | Common-mode voltage input |
| 3 | VS+ | - | Amplifier positive power-supply input |
| 4 | VOUT+ | - | Noninverting amplifier output |
| 5 | VOUT- | - | Inverting amplifier output |
| 6 | VS- | - | Amplifier negative power-supply input. Note that VS- is tied together on multi-channel devices. |
| 7 | PD | - | Power down. PD = logic low puts device into low-power mode. PD = logic high or open for normal operation. |
| 8 | VIN+ | - | Noninverting amplifier input |
THS4521 Electrical Characteristics
At VS+ = 3.3 V, VS= 0 V, VOCM = open, VOUT = 2 VPP (differential), R L = 1 k Ω differential, G = 1 V/V, single-ended input, differential output, and input and output referenced to midsupply, unless otherwise noted.
| PARAMETER | TEST CONDITIONS | TEST LEVEL (1) | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| AC PERFORMANCE | ||||||
| V OUT = 100 mV PP , G = 1 | C | 135 | MHz | |||
| Small-signal bandwidth | V OUT = 100 mV PP , G = 2 | C | 49 | MHz | ||
| Small-signal bandwidth | V OUT = 100 mV PP , G = 5 | C | 18.6 | MHz | ||
| Small-signal bandwidth | V OUT = 100 mV PP , G = 10 | C | 9.3 | MHz | ||
| Gain bandwidth product | V OUT = 100 mV PP , G = 10 | C | 93 | MHz | ||
| Large-signal bandwidth | V OUT = 2 V PP , G = 1 | C | 95 | MHz | ||
| Bandwidth for 0.1-dB flatness | V OUT = 2 V PP , G = 1 | C | 20 | MHz | ||
| Rising slew rate (differential) | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 420 | V/ μ s | ||
| Falling slew rate (differential) | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 460 | V/ μ s | ||
| Overshoot | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 1.2% | |||
| Undershoot | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 2.1% | |||
| Rise time | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 4 | ns | ||
| Fall time | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 3.5 | ns | ||
| Settling time to 1% | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 13 | ns | ||
| HARMONIC DISTORTION | ||||||
| 2nd harmonic | f = 1 MHz, V OUT = 2 V PP , G = 1 | C | -85 | dBc | ||
| f = 1 kHz, V OUT = 1 V RMS , G = 1 (2) , differential input | C | -133 | dBc | |||
| 3rd harmonic | f = 1 MHz, V OUT = 2 V PP , G = 1 | C | -90 | dBc | ||
| f = 1 kHz, V OUT = 1 V RMS , G = 1 (2) , differential input | C | -141 | dBc | |||
| Second-order intermodulation distortion | Two-tone, f 1 = 2 MHz, f 2 = 2.2 MHz, V OUT = 2-V PP envelope | C | -83 | dBc | ||
| Third-order intermodulation distortion | Two-tone, f 1 = 2 MHz, f 2 = 2.2 MHz, V OUT = 2-V PP envelope | C | -90 | dBc | ||
| Input voltage noise | f > 10 kHz | C | 4.6 | nV/ √ Hz | ||
| Input current noise | f > 100 kHz | C | 0.6 | pA/ √ Hz | ||
| Overdrive recovery time | Overdrive = ±0.5 V | C | 80 | ns | ||
| Output balance error | V OUT = 100 mV, f ≤ 2 MHz (differential input) | C | -57 | dB | ||
| Closed-loop output impedance | f = 1 MHz (differential) | C | 0.3 | Ω | ||
| Channel-to-channel crosstalk (THS4522, THS4524) | f = 10 kHz, measured differentially | C | -125 | dB | ||
| DC PERFORMANCE | ||||||
| Open-loop voltage gain (A OL ) | A | 100 | 116 | dB | ||
| T A = +25°C | A | ±0.2 | ±2 | mV | ||
| Input-referred offset voltage | T A = -40°C to +85°C | B | ±0.5 | ±3.5 | mV | |
| Input offset voltage drift (3) | T A = -40°C to +85°C | C | ±2 | μ V/°C | ||
| (4) | T A = +25°C | B | 0.65 | 0.85 | μ A | |
| Input bias current | T A = -40°C to +85°C | B | 0.75 | 0.95 | μ A | |
| Input bias current drift (3) | T A = -40°C to +85°C | B | ±1.75 | ±2 | nA/°C | |
| Input offset | T A = +25°C | B | ±30 | ±180 | nA | |
| current | T A = -40°C to +85°C | B | ±30 | ±215 | nA | |
| Input offset current drift (3) | T A = -40°C to +85°C | B | ±100 | ±600 | pA/°C |
THS4521 Absolute Maximum Ratings
Over operating free-air temperature range (unless otherwise noted). (1)
| MIN | MAX | UNIT | |
|---|---|---|---|
| Supply voltage, V S- to V S+ | 5.5 | V | |
| Input/output voltage, V I (V IN± , V OUT± , V OCM pins) | (V S- ) - 0.7 | (V S+ ) + 0.7 | V |
| Differential input voltage, V ID | 1 | V | |
| Output current, I O | 100 | mA | |
| Input current, I I (V IN± , V OCM pins) | 10 | mA | |
| Continuous power dissipation | See Thermal Information table | See Thermal Information table | |
| Maximum junction temperature, T J | 150 | °C | |
| Maximum junction temperature, T J (continuous operation, long-term reliability) | 125 | °C | |
| Operating free-air temperature, T A | -40 | 85 | °C |
| Storage temperature, T stg | -65 | 150 | °C |
THS4521 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | |
|---|---|---|---|---|
| V S+ single-supply voltage | 2.7 | 5.0 | 5.4 | V |
| T A Ambient temperature | -40 | 25 | 85 | °C |
THS4521 Thermal Information
| THERMAL METRIC (1) | THS4521 - D - 8 PINS | THS4521 - DGK - 8 PINS | THS4522 - PW - 16 PINS | THS4524 - DBT - 38 PINS | UNIT | |
|---|---|---|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 127.8 | 193.8 | 124.2 | 106.2 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 81.8 | 84.1 | 62.8 | 60.9 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 68.3 | 115.3 | 68.5 | 65.5 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 32.2 | 17.9 | 15.8 | 18.5 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 67.8 | 113.6 | 68 | 65.1 | °C/W |
| R θ JC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A | N/A | N/A | °C/W |
THS4521 Typical Application
The following circuits show application information for the THS4521, THS4522, and THS4524 family. For simplicity, power-supply decoupling capacitors are not shown in these diagrams; see Layout Guidelines for suggested guidelines. For more details on the use and operation of fully differential amplifiers, refer to the Application Report Fully-Differential Amplifiers (SLOA054), available for download from the TI web site at www.ti.com.
THS4521 Ordering Information
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| THS4521 | SOIC (8), VSSOP (8) | 4.90 mm × 3.91 mm, 3.00 mm × 3.00 mm |
| THS4522 | TSSOP (16) | 5.00 mm × 4.40 mm |
| THS4524 | TSSOP (38) | 9.70 mm × 4.40 mm |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| THS4521D | Texas Instruments | — |
| THS4521ID | Texas Instruments | — |
| THS4521ID.B | Texas Instruments | — |
| THS4521IDGKR | Texas Instruments | — |
| THS4521IDGKR.B | Texas Instruments | — |
| THS4521IDGKT | Texas Instruments | — |
| THS4521IDGKT.B | Texas Instruments | — |
| THS4521IDR | Texas Instruments | |
| THS4521IDR.B | Texas Instruments | — |
| THS4521IDRG4 | Texas Instruments | — |
| THS4521IDRG4.B | Texas Instruments | — |
| THS4522 | Texas Instruments | — |
| THS4524 | Texas Instruments | — |
More datasheets
Ask your AI agent about the THS4521
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the THS4521 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.