THS4521IDGKT
Fully Differential AmplifierThe THS4521IDGKT is a fully differential amplifier from Texas Instruments. View the full THS4521IDGKT datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
THS4521IDGKT shares its datasheet with THS4521, whose page lists every part number it covers.
Official THS4521IDGKT datasheet (PDF) — the source this page was extracted from.
Manufacturer
Texas InstrumentsCategory
Fully Differential Amplifier
THS4521IDGKT Key Specifications
| Parameter | Value |
|---|---|
| Small-signal bandwidth at 3.3 V (VOUT = 100 mVPP) | 135 MHz (G = 1), 49 MHz (G = 2), 18.6 MHz (G = 5), 9.3 MHz (G = 10) |
| Gain bandwidth product | 93 MHz (G = 10, 3.3 V) |
| Slew rate at 3.3 V (2 V step, G = 1, RL = 200 Ω) | 420 V/μs rising, 460 V/μs falling |
| Open-loop gain at 3.3 V | 116 dB typ, 100 dB min |
| Input offset voltage at 3.3 V | ±0.2 mV typ, ±2 mV max (TA = 25 °C); ±3.5 mV max over -40 to 85 °C |
| Input bias current at 3.3 V | 0.65 μA typ, 0.85 μA max (TA = 25 °C) |
| Input voltage noise | 4.6 nV/√Hz; input current noise: 0.6 pA/√Hz |
| HD2/HD3 at 1 kHz (1 VRMS, G = 1) | -133 dBc / -141 dBc |
| CMRR at 3.3 V | 100 dB typ, 80 dB min |
| Quiescent current | 1.14 mA/ch (feature list); power-down current 20 μA typ |
THS4521IDGKT Overview
Part: THS4521 / THS4522 / THS4524 (THS452x) — Texas Instruments
Type: Fully Differential Amplifier (negative rail input, rail-to-rail output)
Description: Very low-power fully differential amplifier family (single, dual, quad) with 145 MHz bandwidth (G = 1 V/V), 490 V/μs slew rate, 1.14 mA/ch supply current and operation from a 2.5 V to 5.5 V supply.
Operating Conditions:
- Supply voltage: 2.7–5.4 V single supply (Recommended Operating Conditions); features list 2.5–5.5 V
- Operating temperature: -40 to 85 °C
- Characterized at VS+ − VS− = 3.3 V and 5 V
Absolute Maximum Ratings:
- Max supply voltage (VS− to VS+): 5.5 V
- Output current: 100 mA
- Input current (VIN±, VOCM pins): 10 mA
- Differential input voltage: 1 V
- Max junction temperature: 150 °C (125 °C for continuous operation, long-term reliability)
- Storage temperature: -65 to 150 °C
- ESD: HBM ±1300 V, CDM ±1000 V, MM ±50 V
Key Specs:
- Small-signal bandwidth at 3.3 V (VOUT = 100 mVPP): 135 MHz (G = 1), 49 MHz (G = 2), 18.6 MHz (G = 5), 9.3 MHz (G = 10)
- Gain bandwidth product: 93 MHz (G = 10, 3.3 V)
- Slew rate at 3.3 V (2 V step, G = 1, RL = 200 Ω): 420 V/μs rising, 460 V/μs falling
- Open-loop gain at 3.3 V: 116 dB typ, 100 dB min
- Input offset voltage at 3.3 V: ±0.2 mV typ, ±2 mV max (TA = 25 °C); ±3.5 mV max over -40 to 85 °C
- Input bias current at 3.3 V: 0.65 μA typ, 0.85 μA max (TA = 25 °C)
- Input voltage noise: 4.6 nV/√Hz; input current noise: 0.6 pA/√Hz
- HD2/HD3 at 1 kHz (1 VRMS, G = 1): -133 dBc / -141 dBc
- CMRR at 3.3 V: 100 dB typ, 80 dB min
- Quiescent current: 1.14 mA/ch (feature list); power-down current 20 μA typ
Features:
- Fully differential architecture
- Negative rail input (NRI) and rail-to-rail output (RRO)
- Output common-mode control with low offset
- THD+N: -112 dBc (0.00025%) at 1 kHz (22 kHz BW, G = 1, 5 VPP)
- Power-down capability
- Single (THS4521), dual (THS4522) and quad (THS4524) versions
Applications:
- Low-power SAR and ΔΣ ADC drivers
- Low-power differential drivers
- Low-power differential signal conditioning
- Low-power, high-performance differential audio amplifiers
Package:
- THS4521: SOIC-8 (4.90 × 3.91 mm), VSSOP-8 (3.00 × 3.00 mm)
- THS4522: TSSOP-16 (5.00 × 4.40 mm)
- THS4524: TSSOP-38 (9.70 × 4.40 mm)
THS4521IDGKT Applications
- Low-Power SAR and ΔΣ ADC Drivers
- Low-Power Differential Drivers
- Low-Power Differential Signal Conditioning
- Low-Power, High-Performance Differential Audio Amplifiers
THS4521IDGKT Pin Configuration
Pin Functions: THS4521
| PIN - NAME | PIN - NO. | DESCRIPTION |
|---|---|---|
| V IN- | 1 | Inverting amplifier input |
| V OCM | 2 | Common-mode voltage input |
| V S+ | 3 | Amplifier positive power-supply input |
| V OUT+ | 4 | Noninverting amplifier output |
| V OUT- | 5 | Inverting amplifier output |
| V S- | 6 | Amplifier negative power-supply input. Note that V S- is tied together on multi-channel devices. |
| PD | 7 | Power down. PD = logic low puts device into low-power mode. PD = logic high or open for normal operation. |
| V IN+ | 8 | Noninverting amplifier input |
Pin Functions: THS4521
THS4521IDGKT Electrical Characteristics
At VS+ = 3.3 V, VS= 0 V, VOCM = open, VOUT = 2 VPP (differential), R L = 1 k Ω differential, G = 1 V/V, single-ended input, differential output, and input and output referenced to midsupply, unless otherwise noted.
| PARAMETER | TEST CONDITIONS | TEST LEVEL (1) | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| AC PERFORMANCE | ||||||
| V OUT = 100 mV PP , G = 1 | C | 135 | MHz | |||
| Small-signal bandwidth | V OUT = 100 mV PP , G = 2 | C | 49 | MHz | ||
| Small-signal bandwidth | V OUT = 100 mV PP , G = 5 | C | 18.6 | MHz | ||
| Small-signal bandwidth | V OUT = 100 mV PP , G = 10 | C | 9.3 | MHz | ||
| Gain bandwidth product | V OUT = 100 mV PP , G = 10 | C | 93 | MHz | ||
| Large-signal bandwidth | V OUT = 2 V PP , G = 1 | C | 95 | MHz | ||
| Bandwidth for 0.1-dB flatness | V OUT = 2 V PP , G = 1 | C | 20 | MHz | ||
| Rising slew rate (differential) | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 420 | V/ μ s | ||
| Falling slew rate (differential) | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 460 | V/ μ s | ||
| Overshoot | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 1.2% | |||
| Undershoot | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 2.1% | |||
| Rise time | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 4 | ns | ||
| Fall time | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 3.5 | ns | ||
| Settling time to 1% | V OUT = 2-V Step, G = 1, R L = 200 Ω | C | 13 | ns | ||
| HARMONIC DISTORTION | ||||||
| 2nd harmonic | f = 1 MHz, V OUT = 2 V PP , G = 1 | C | -85 | dBc | ||
| f = 1 kHz, V OUT = 1 V RMS , G = 1 (2) , differential input | C | -133 | dBc | |||
| 3rd harmonic | f = 1 MHz, V OUT = 2 V PP , G = 1 | C | -90 | dBc | ||
| f = 1 kHz, V OUT = 1 V RMS , G = 1 (2) , differential input | C | -141 | dBc | |||
| Second-order intermodulation distortion | Two-tone, f 1 = 2 MHz, f 2 = 2.2 MHz, V OUT = 2-V PP envelope | C | -83 | dBc | ||
| Third-order intermodulation distortion | Two-tone, f 1 = 2 MHz, f 2 = 2.2 MHz, V OUT = 2-V PP envelope | C | -90 | dBc | ||
| Input voltage noise | f > 10 kHz | C | 4.6 | nV/ √ Hz | ||
| Input current noise | f > 100 kHz | C | 0.6 | pA/ √ Hz | ||
| Overdrive recovery time | Overdrive = ±0.5 V | C | 80 | ns | ||
| Output balance error | V OUT = 100 mV, f ≤ 2 MHz (differential input) | C | -57 | dB | ||
| Closed-loop output impedance | f = 1 MHz (differential) | C | 0.3 | Ω | ||
| Channel-to-channel crosstalk (THS4522, THS4524) | f = 10 kHz, measured differentially | C | -125 | dB | ||
| DC PERFORMANCE | ||||||
| Open-loop voltage gain (A OL ) | A | 100 | 116 | dB | ||
| T A = +25°C | A | ±0.2 | ±2 | mV | ||
| Input-referred offset voltage | T A = -40°C to +85°C | B | ±0.5 | ±3.5 | mV | |
| Input offset voltage drift (3) | T A = -40°C to +85°C | C | ±2 | μ V/°C | ||
| (4) | T A = +25°C | B | 0.65 | 0.85 | μ A | |
| Input bias current | T A = -40°C to +85°C | B | 0.75 | 0.95 | μ A | |
| Input bias current drift (3) | T A = -40°C to +85°C | B | ±1.75 | ±2 | nA/°C | |
| Input offset | T A = +25°C | B | ±30 | ±180 | nA | |
| current | T A = -40°C to +85°C | B | ±30 | ±215 | nA | |
| Input offset current drift (3) | T A = -40°C to +85°C | B | ±100 | ±600 | pA/°C |
THS4521IDGKT Absolute Maximum Ratings
Over operating free-air temperature range (unless otherwise noted). (1)
| MIN | MAX | UNIT | |
|---|---|---|---|
| Supply voltage, V S- to V S+ | 5.5 | V | |
| Input/output voltage, V I (V IN± , V OUT± , V OCM pins) | (V S- ) - 0.7 | (V S+ ) + 0.7 | V |
| Differential input voltage, V ID | 1 | V | |
| Output current, I O | 100 | mA | |
| Input current, I I (V IN± , V OCM pins) | 10 | mA | |
| Continuous power dissipation | See Thermal Information table | See Thermal Information table | |
| Maximum junction temperature, T J | 150 | °C | |
| Maximum junction temperature, T J (continuous operation, long-term reliability) | 125 | °C | |
| Operating free-air temperature, T A | -40 | 85 | °C |
| Storage temperature, T stg | -65 | 150 | °C |
THS4521IDGKT Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | |
|---|---|---|---|---|
| V S+ single-supply voltage | 2.7 | 5.0 | 5.4 | V |
| T A Ambient temperature | -40 | 25 | 85 | °C |
THS4521IDGKT Thermal Information
| THERMAL METRIC (1) | THS4521 - D - 8 PINS | THS4521 - DGK - 8 PINS | THS4522 - PW - 16 PINS | THS4524 - DBT - 38 PINS | UNIT | |
|---|---|---|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance | 127.8 | 193.8 | 124.2 | 106.2 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance | 81.8 | 84.1 | 62.8 | 60.9 | °C/W |
| R θ JB | Junction-to-board thermal resistance | 68.3 | 115.3 | 68.5 | 65.5 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 32.2 | 17.9 | 15.8 | 18.5 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 67.8 | 113.6 | 68 | 65.1 | °C/W |
| R θ JC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A | N/A | N/A | °C/W |
THS4521IDGKT Typical Application
The following circuits show application information for the THS4521, THS4522, and THS4524 family. For simplicity, power-supply decoupling capacitors are not shown in these diagrams; see Layout Guidelines for suggested guidelines. For more details on the use and operation of fully differential amplifiers, refer to the Application Report Fully-Differential Amplifiers (SLOA054), available for download from the TI web site at www.ti.com.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| THS4521 | Texas Instruments | SOIC (8) |
| THS4521D | Texas Instruments | — |
| THS4521ID | Texas Instruments | — |
| THS4521ID.B | Texas Instruments | — |
| THS4521IDGKR | Texas Instruments | — |
| THS4521IDGKR.B | Texas Instruments | — |
| THS4521IDGKT.B | Texas Instruments | — |
| THS4521IDR | Texas Instruments | |
| THS4521IDR.B | Texas Instruments | — |
| THS4521IDRG4 | Texas Instruments | — |
| THS4521IDRG4.B | Texas Instruments | — |
| THS4522 | Texas Instruments | — |
| THS4524 | Texas Instruments | — |
More datasheets
Ask your AI agent about the THS4521IDGKT
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the THS4521IDGKT run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.