STM32G431CB

ARM Cortex-M4 MCU

The STM32G431CB is a arm cortex-m4 mcu from STMicroelectronics. View the full STM32G431CB datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

Manufacturer

STMicroelectronics

Key Specifications

Parameter	Value
Packaging	Tray
Standard Pack Qty	1560

Overview

Part: STM32G431x6/x8/xB from STMicroelectronics

Type: ARM Cortex-M4 32-bit MCU+FPU

Description: 32-bit ARM Cortex-M4 MCU with FPU, operating at up to 170 MHz with 213 DMIPS, featuring up to 128 KB Flash memory, 32 KB SRAM, rich analog peripherals, and mathematical hardware accelerators.

Operating Conditions:

Supply voltage: 1.71–3.6 V
Operating temperature: -40 to +125 °C
Max CPU frequency: 170 MHz

Absolute Maximum Ratings:

Max supply voltage: 4.0 V (VDD, VDDA, VDDIO2, VDDUSB)
Max continuous current: 25 mA (per I/O pin)
Max junction/storage temperature: +125 °C (junction), +150 °C (storage)

Key Specs:

Core: Arm® 32-bit Cortex®-M4 CPU with FPU, up to 170 MHz
Flash memory: Up to 128 Kbytes with ECC support
SRAM: 22 Kbytes (plus 10 Kbytes CCM SRAM)
ADC: 2 x 0.25 μs (up to 23 channels), up to 16-bit resolution, 0 to 3.6 V conversion range
DAC: 4 x 12-bit channels (2 buffered external 1 MSPS, 2 unbuffered internal 15 MSPS)
Comparators: 4 x ultra-fast rail-to-rail analog comparators
Operational Amplifiers: 3 x, usable in PGA mode
I/Os: Up to 86 fast I/Os, several with 5 V tolerant capability

Features:

Adaptive real-time accelerator (ART Accelerator) for 0-wait-state execution from Flash
Mathematical hardware accelerators: CORDIC for trigonometric functions, FMAC for filter operations
Comprehensive clock management: 4-48 MHz crystal, 32 kHz oscillator, internal 16 MHz RC (±1%), internal 32 kHz RC (±5%)
12-channel DMA controller
Internal voltage reference buffer supporting 2.048 V, 2.5 V, 2.9 V outputs
14 timers including advanced motor control, general-purpose, basic, low-power, and watchdog timers
Communication interfaces: 1 x FDCAN, 4 x USART/UARTs, 1 x LPUART, 3 x SPIs (2 with I2S), 1 x SAI, USB 2.0 full-speed, IRTIM, USB Type-C™ / USB Power Delivery controller (UCPD)
True random number generator (RNG)
3 x I2C Fast mode plus (1 Mbit/s) with 20 mA current sink and wakeup from stop
Development support: Serial wire debug (SWD), JTAG, Embedded Trace Macrocell™

Applications:

Package:

UFQFPN32 (5 x 5 mm)
UFQFPN48 (7 x 7 mm)
LQFP48 (7 x 7 mm)
LQFP64 (10 x 10 mm)
LQFP80 (12 x 12 mm)
LQFP32 (7 x 7 mm)
LQFP100 (14 x 14 mm)
UFBGA64 (5 x 5 mm)
WLCSP49 (Pitch 0.4)

Features

24-bit CORDIC rotation engine
Circular and Hyperbolic modes
Rotation and Vectoring modes
Functions: Sine, Cosine, Sinh, Cosh, Atan, Atan2, Atanh, Modulus, Square root, Natural logarithm
Programmable precision up to 20-bit
Fast convergence: 4 bits per clock cycle
Supports 16-bit and 32-bit fixed point input and output formats
Low latency AHB slave interface
Results can be read as soon as ready without polling or interrupt
DMA read and write channels

Electrical Characteristics

The definition and values of input/output AC characteristics are given in Figure 26 and Table 55 , respectively.

Unless otherwise specified, the parameters given are derived from tests performed under the ambient temperature and supply voltage conditions summarized in Table 17: General operating conditions .

160

Table 55. I/O (except FT_c) AC characteristics (1) (2)

Speed	Symbol	Parameter	Conditions	Min	Max	Unit
00	Fmax	Maximum frequency	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	5	MHz
00	Fmax	Maximum frequency	C=50 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	1	MHz
00	Fmax	Maximum frequency	C=10 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	10	MHz
00	Fmax	Maximum frequency	C=10 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	1.5	MHz
00	Tr/Tf	Output rise and fall time	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	25	ns
00	Tr/Tf	Output rise and fall time	C=50 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	52	ns
00	Tr/Tf	Output rise and fall time	C=10 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	17	ns
00	Tr/Tf	Output rise and fall time	C=10 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	37	ns
01	Fmax	Maximum frequency	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	25	MHz
01	Fmax	Maximum frequency	C=50 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	10	MHz
01	Fmax	Maximum frequency	C=10 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	50	MHz
01	Fmax	Maximum frequency	C=10 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	15	MHz
	Tr/Tf	Output rise and fall time	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	9	ns
	Tr/Tf	Output rise and fall time	C=50 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	16	ns
	Tr/Tf	Output rise and fall time	C=10 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	4.5	ns
	Tr/Tf	Output rise and fall time	C=10 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	9	ns
10	Fmax	Maximum frequency	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	50	MHz
10	Fmax	Maximum frequency	C=50 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	25	MHz
10	Fmax	Maximum frequency	C=10 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	100 (3)	MHz
10	Fmax	Maximum frequency	C=10 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	37.5	MHz
10	Tr/Tf	Output rise and fall time	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	5.8	ns
10	Tr/Tf	Output rise and fall time	C=50 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	11	ns
10	Tr/Tf	Output rise and fall time	C=10 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	2.5	ns
10	Tr/Tf		C=10 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	5
11	Fmax	Maximum frequency	C=30 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	120 (3)	MHz
11	Fmax	Maximum frequency	C=30 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	50	MHz
11	Fmax	Maximum frequency	C=10 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	180 (3)	MHz
11	Fmax		C=10 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	75
11	Tr/Tf	Output rise and	C=30 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	3.3	ns
11	Tr/Tf	Output rise and	C=30 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	6	ns
11	Tr/Tf	fall time (4)	C=10 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	1.7	ns
11	Tr/Tf		C=10 pF, 1.62 V ≤ V DD ≤ 2.7 V	-	3.3	ns

Table 55. I/O (except FT_c) AC characteristics (1) (2)

Table 55. I/O (except FT_c) AC characteristics (1) (2) (continued)

Speed	Symbol	Parameter	Conditions	Min	Max	Unit
FM+	Fmax (5)	Maximum frequency	C=50 pF, 1.6 V ≤ V DD ≤ 3.6 V	-	1	MHz
FM+	Tr/TF (4)	Output high to low level fall time	C=50 pF, 1.6 V ≤ V DD ≤ 3.6 V	-	5	ns

The I/O speed is configured using the OSPEEDRy[1:0] bits. The Fm+ mode is configured in the SYSCFG_CFGR1 register. Refer to the reference manual RM0440 "STM32G4 Series advanced Arm ® based 32-bit MCUs" for a description of GPIO Port configuration register.
Guaranteed by design.
This value represented the I/O capability but maximum system frequency is 170 MHz.
The fall time is defined between 70% and 30% of the output waveform accordingly to I2C specification.
The maximum frequency is defined with the following conditions:

45%<Duty cycle<55%
(Tr+ Tf) ≤ 2/3 T.

The I/O speed is configured using the OSPEEDRy[1:0] bits. The Fm+ mode is configured in the SYSCFG_CFGR1 register. Refer to the reference manual RM0440 "STM32G4 Series advanced Arm ® based 32-bit MCUs" for a description of GPIO Port configuration register.
Guaranteed by design.

Table 56. I/O FT_c AC characteristics (1) (2)

Speed	Symbol	Parameter	Conditions	Min	Max	Unit
0	Fmax	Maximum frequency	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	2	MHz
0	Fmax	Maximum frequency	C=50 pF, 1.6 V ≤ V DD ≤ 2.7 V	-	1	MHz
0	Tr/Tf	Output H/L to L/H level fall time	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	170	ns
0	Tr/Tf	Output H/L to L/H level fall time	C=50 pF, 1.6 V ≤ V DD ≤ 2.7 V	-	330	ns
1	Fmax	Maximum frequency	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	10	MHz
1	Fmax	Maximum frequency	C=50 pF, 1.6 V ≤ V DD ≤ 2.7 V	-	5	MHz
1	Tr/Tf	Output H/L to L/H level fall time	C=50 pF, 2.7 V ≤ V DD ≤ 3.6 V	-	35	ns
1	Tr/Tf	Output H/L to L/H level fall time	C=50 pF, 1.6 V ≤ V DD ≤ 2.7 V	-	65	ns

160

Absolute Maximum Ratings

Stresses above the absolute maximum ratings listed in Table 14: Voltage characteristics , Table 15: Current characteristics and Table 16: Thermal characteristics may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. Exposure to maximum rating conditions for extended periods may affect device reliability. Device mission profile (application conditions) is compliant with JEDEC JESD47 qualification standard, extended mission profiles are available on demand.

Table 14. Voltage characteristics (1)

Symbol	Ratings	Min	Max	Unit
V DD - V SS	External main supply voltage (including V DD , V DDA , V BAT and V REF+ )	-0.3	4.0	V
V IN (2)	Input voltage on FT_xxx pins except FT_c pins	V SS -0.3	min (V DD ,V DDA ) + 4.0 (3)(4)	V
V IN (2)	Input voltage on FT_c pins	V SS -0.3	5.5	V
V IN (2)	Input voltage on TT_xx pins	V SS -0.3	4.0	V
V IN (2)	Input voltage on any other pins	V SS -0.3	4.0	V
\| ∆ V DDx \|	Variations between different V DDX power pins of the same domain	-	50	mV
\|V SSx -V SS \|	Variations between all the different ground pins (5)	-	50	mV
V REF+ -V DDA	Allowed voltage difference for V REF+ > V DDA	-	0.4	V

Table 14. Voltage characteristics (1)

160

VIN maximum must always be respected. Refer to Table 15: Current characteristics for the maximum allowed injected current values.
This formula has to be applied only on the power supplies related to the IO structure described in the pin definition table.
To sustain a voltage higher than 4 V the internal pull-up/pull-down resistors must be disabled.
Include VREF- pin.
This current consumption must be correctly distributed over all I/Os and control pins. The total output current must not be sunk/sourced between two consecutive power supply pins referring to high pin count LQFP packages.
Positive injection (when V IN > V DD ) is not possible on these I/Os and does not occur for input voltages lower than the specified maximum value.
A negative injection is induced by VIN < VSS. IINJ(PIN) must never be exceeded. Refer also to Table 14: Voltage characteristics for the minimum allowed input voltage values.
When several inputs are submitted to a current injection, the maximum ∑ |I INJ(PIN) | is the absolute sum of the negative injected currents (instantaneous values).

Table 15. Current characteristics

Symbol	Ratings	Max	Unit
∑ IV DD	Total current into sum of all V DD power lines (source) (1)	150	mA
∑ IV SS	Total current out of sum of all V SS ground lines (sink) (1)	150	mA
IV DD(PIN)	Maximum current into each V DD power pin (source) (1)	100	mA
IV SS(PIN)	Maximum current out of each V SS ground pin (sink) (1)	100	mA
I IO(PIN)	Output current sunk by any I/O and control pin except FT_f	20	mA
I IO(PIN)	Output current sunk by any FT_f pin	20	mA
I IO(PIN)	Output current sourced by any I/O and control pin	20	mA
∑ I IO(PIN)	Total output current sunk by sum of all I/Os and control pins (2)	100	mA
∑ I IO(PIN)	Total output current sourced by sum of all I/Os and control pins (2)	100	mA
I INJ(PIN) (3)	Injected current on FT_xxx, TT_xx, NRST pins	-5/0 (4)	mA
∑ \|I INJ(PIN) \|	Total injected current (sum of all I/Os and control pins) (5)	±25	mA

Table 16. Thermal characteristics

Symbol	Ratings	Value	Unit
T STG	Storage temperature range	-65 to +150	°C
T J	Maximum junction temperature	150	°C

Table 16. Thermal characteristics

Thermal Information

The maximum chip-junction temperature, T J max, in degrees Celsius, may be calculated using the following equation:

T J max = T A max + (P D max x Θ JA )

Package Information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com . ECOPACK is an ST trademark.

Related Variants

The following components are covered by the same datasheet.

Part Number	Manufacturer	Package
STM32G431C6	STMicroelectronics	—
STM32G431C8	STMicroelectronics	—
STM32G431CBU6	STMicroelectronics	—
STM32G431CX	STMicroelectronics	—
STM32G431K6	STMicroelectronics	—
STM32G431K8	STMicroelectronics	—
STM32G431KB	STMicroelectronics	—
STM32G431KX	STMicroelectronics	—
STM32G431M6	STMicroelectronics	—
STM32G431M8	STMicroelectronics	—
STM32G431MB	STMicroelectronics	—
STM32G431MX	STMicroelectronics	—
STM32G431R6	STMicroelectronics	—
STM32G431R8	STMicroelectronics	—
STM32G431RB	STMicroelectronics	—
STM32G431RX	STMicroelectronics	—
STM32G431V6	STMicroelectronics	—
STM32G431V8	STMicroelectronics	—
STM32G431VB	STMicroelectronics	—
STM32G431VX	STMicroelectronics	—
STM32G431X6	STMicroelectronics	—
STM32G431X6/X8/XB	STMicroelectronics	—
STM32G431X8	STMicroelectronics	—
STM32G431XB	STMicroelectronics	—
STM32G431XX	STMicroelectronics	—

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free